aims case study

• Aims and Objectives – A Guide for Academic Writing
• Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

• Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
• Investigate the number, velocity and position of impacts needed to insert a cup.
• Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
• Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
• Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
• Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
• Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
• Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

• Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
• What is the number, velocity and position of impacts needed to insert a cup?
• What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

• The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
• Research aims are relatively broad; research objectives are specific.
• Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
• A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

• Why is this research required?
• What is this research about?
• How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

• Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
• Measurable – how will you measure progress and determine when you have achieved the action?
• Achievable – do you have the support, resources and facilities required to carry out the action?
• Relevant – is the action essential to the achievement of your research aim?
• Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Case Study Methods and Examples

By Janet Salmons, PhD Manager, Sage Research Methods Community

What is Case Study Methodology ?

Case studies in research are both unique and uniquely confusing. The term case study is confusing because the same term is used multiple ways. The term can refer to the methodology, that is, a system of frameworks used to design a study, or the methods used to conduct it. Or, case study can refer to a type of academic writing that typically delves into a problem, process, or situation.

Case study methodology can entail the study of one or more "cases," that could be described as instances, examples, or settings where the problem or phenomenon can be examined. The researcher is tasked with defining the parameters of the case, that is, what is included and excluded. This process is called bounding the case , or setting boundaries.

Case study can be combined with other methodologies, such as ethnography, grounded theory, or phenomenology. In such studies the research on the case uses another framework to further define the study and refine the approach.

Case study is also described as a method, given particular approaches used to collect and analyze data. Case study research is conducted by almost every social science discipline: business, education, sociology, psychology. Case study research, with its reliance on multiple sources, is also a natural choice for researchers interested in trans-, inter-, or cross-disciplinary studies.

The Encyclopedia of case study research provides an overview:

The purpose of case study research is twofold: (1) to provide descriptive information and (2) to suggest theoretical relevance. Rich description enables an in-depth or sharpened understanding of the case.

It is unique given one characteristic: case studies draw from more than one data source. Case studies are inherently multimodal or mixed methods because this they use either more than one form of data within a research paradigm, or more than one form of data from different paradigms.

A case study inquiry could include multiple types of data:

multiple forms of quantitative data sources, such as Big Data + a survey

multiple forms of qualitative data sources, such as interviews + observations + documents

multiple forms of quantitative and qualitative data sources, such as surveys + interviews

Case study methodology can be used to achieve different research purposes.

Robert Yin , methodologist most associated with case study research, differentiates between descriptive , exploratory and explanatory case studies:

Descriptive : A case study whose purpose is to describe a phenomenon. Explanatory : A case study whose purpose is to explain how or why some condition came to be, or why some sequence of events occurred or did not occur. Exploratory: A case study whose purpose is to identify the research questions or procedures to be used in a subsequent study.

Robert Yin’s book is a comprehensive guide for case study researchers!

You can read the preface and Chapter 1 of Yin's book here . See the open-access articles below for some published examples of qualitative, quantitative, and mixed methods case study research.

Mills, A. J., Durepos, G., & Wiebe, E. (2010).  Encyclopedia of case study research (Vols. 1-0). Thousand Oaks, CA: SAGE Publications, Inc. doi: 10.4135/9781412957397

Yin, R. K. (2018). Case study research and applications (6th ed.). Thousand Oaks: SAGE Publications.

Open-Access Articles Using Case Study Methodology

As you can see from this collection, case study methods are used in qualitative, quantitative and mixed methods research.

Ang, C.-S., Lee, K.-F., & Dipolog-Ubanan, G. F. (2019). Determinants of First-Year Student Identity and Satisfaction in Higher Education: A Quantitative Case Study. SAGE Open. https://doi.org/10.1177/2158244019846689

Abstract. First-year undergraduates’ expectations and experience of university and student engagement variables were investigated to determine how these perceptions influence their student identity and overall course satisfaction. Data collected from 554 first-year undergraduates at a large private university were analyzed. Participants were given the adapted version of the Melbourne Centre for the Study of Higher Education Survey to self-report their learning experience and engagement in the university community. The results showed that, in general, the students’ reasons of pursuing tertiary education were to open the door to career opportunities and skill development. Moreover, students’ views on their learning and university engagement were at the moderate level. In relation to student identity and overall student satisfaction, it is encouraging to state that their perceptions of studentship and course satisfaction were rather positive. After controlling for demographics, student engagement appeared to explain more variance in student identity, whereas students’ expectations and experience explained greater variance in students’ overall course satisfaction. Implications for practice, limitations, and recommendation of this study are addressed.

Baker, A. J. (2017). Algorithms to Assess Music Cities: Case Study—Melbourne as a Music Capital. SAGE Open. https://doi.org/10.1177/2158244017691801

Abstract. The global  Mastering of a Music City  report in 2015 notes that the concept of music cities has penetrated the global political vernacular because it delivers “significant economic, employment, cultural and social benefits.” This article highlights that no empirical study has combined all these values and offers a relevant and comprehensive definition of a music city. Drawing on industry research,1 the article assesses how mathematical flowcharts, such as Algorithm A (Economics), Algorithm B (Four T’s creative index), and Algorithm C (Heritage), have contributed to the definition of a music city. Taking Melbourne as a case study, it illustrates how Algorithms A and B are used as disputed evidence about whether the city is touted as Australia’s music capital. The article connects the three algorithms to an academic framework from musicology, urban studies, cultural economics, and sociology, and proposes a benchmark Algorithm D (Music Cities definition), which offers a more holistic assessment of music activity in any urban context. The article concludes by arguing that Algorithm D offers a much-needed definition of what comprises a music city because it builds on the popular political economy focus and includes the social importance of space and cultural practices.

Brown, K., & Mondon, A. (2020). Populism, the media, and the mainstreaming of the far right: The Guardian’s coverage of populism as a case study. Politics. https://doi.org/10.1177/0263395720955036

Abstract. Populism seems to define our current political age. The term is splashed across the headlines, brandished in political speeches and commentaries, and applied extensively in numerous academic publications and conferences. This pervasive usage, or populist hype, has serious implications for our understanding of the meaning of populism itself and for our interpretation of the phenomena to which it is applied. In particular, we argue that its common conflation with far-right politics, as well as its breadth of application to other phenomena, has contributed to the mainstreaming of the far right in three main ways: (1) agenda-setting power and deflection, (2) euphemisation and trivialisation, and (3) amplification. Through a mixed-methods approach to discourse analysis, this article uses  The Guardian  newspaper as a case study to explore the development of the populist hype and the detrimental effects of the logics that it has pushed in public discourse.

Droy, L. T., Goodwin, J., & O’Connor, H. (2020). Methodological Uncertainty and Multi-Strategy Analysis: Case Study of the Long-Term Effects of Government Sponsored Youth Training on Occupational Mobility. Bulletin of Sociological Methodology/Bulletin de Méthodologie Sociologique, 147–148(1–2), 200–230. https://doi.org/10.1177/0759106320939893

Abstract. Sociological practitioners often face considerable methodological uncertainty when undertaking a quantitative analysis. This methodological uncertainty encompasses both data construction (e.g. defining variables) and analysis (e.g. selecting and specifying a modelling procedure). Methodological uncertainty can lead to results that are fragile and arbitrary. Yet, many practitioners may be unaware of the potential scale of methodological uncertainty in quantitative analysis, and the recent emergence of techniques for addressing it. Recent proposals for ‘multi-strategy’ approaches seek to identify and manage methodological uncertainty in quantitative analysis. We present a case-study of a multi-strategy analysis, applied to the problem of estimating the long-term impact of 1980s UK government-sponsored youth training. We use this case study to further highlight the problem of cumulative methodological fragilities in applied quantitative sociology and to discuss and help develop multi-strategy analysis as a tool to address them.

Ebneyamini, S., & Sadeghi Moghadam, M. R. (2018). Toward Developing a Framework for Conducting Case Study Research .  International Journal of Qualitative Methods .  https://doi.org/10.1177/1609406918817954

Abstract. This article reviews the use of case study research for both practical and theoretical issues especially in management field with the emphasis on management of technology and innovation. Many researchers commented on the methodological issues of the case study research from their point of view thus, presenting a comprehensive framework was missing. We try representing a general framework with methodological and analytical perspective to design, develop, and conduct case study research. To test the coverage of our framework, we have analyzed articles in three major journals related to the management of technology and innovation to approve our framework. This study represents a general structure to guide, design, and fulfill a case study research with levels and steps necessary for researchers to use in their research.

Lai, D., & Roccu, R. (2019). Case study research and critical IR: the case for the extended case methodology. International Relations , 33 (1), 67-87. https://doi.org/10.1177/0047117818818243

Abstract. Discussions on case study methodology in International Relations (IR) have historically been dominated by positivist and neopositivist approaches. However, these are problematic for critical IR research, pointing to the need for a non-positivist case study methodology. To address this issue, this article introduces and adapts the extended case methodology as a critical, reflexivist approach to case study research, whereby the case is constructed through a dynamic interaction with theory, rather than selected, and knowledge is produced through extensions rather than generalisation. Insofar as it seeks to study the world in complex and non-linear terms, take context and positionality seriously, and generate explicitly political and emancipatory knowledge, the extended case methodology is consistent with the ontological and epistemological commitments of several critical IR approaches. Its potential is illustrated in the final part of the article with reference to researching the socioeconomic dimension of transitional justice in Bosnia and Herzegovina.

Lynch, R., Young, J. C., Boakye-Achampong, S., Jowaisas, C., Sam, J., & Norlander, B. (2020). Benefits of crowdsourcing for libraries: A case study from Africa . IFLA Journal. https://doi.org/10.1177/0340035220944940

Abstract. Many libraries in the Global South do not collect comprehensive data about themselves, which creates challenges in terms of local and international visibility. Crowdsourcing is an effective tool that engages the public to collect missing data, and it has proven to be particularly valuable in countries where governments collect little public data. Whereas crowdsourcing is often used within fields that have high levels of development funding, such as health, the authors believe that this approach would have many benefits for the library field as well. They present qualitative and quantitative evidence from 23 African countries involved in a crowdsourcing project to map libraries. The authors find benefits in terms of increased connections between stakeholders, capacity-building, and increased local visibility. These findings demonstrate the potential of crowdsourced approaches for tasks such as mapping to benefit libraries and similarly positioned institutions in the Global South in multifaceted ways.

Mason, W., Morris, K., Webb, C., Daniels, B., Featherstone, B., Bywaters, P., Mirza, N., Hooper, J., Brady, G., Bunting, L., & Scourfield, J. (2020). Toward Full Integration of Quantitative and Qualitative Methods in Case Study Research: Insights From Investigating Child Welfare Inequalities. Journal of Mixed Methods Research, 14 (2), 164-183. https://doi.org/10.1177/1558689819857972

Abstract. Delineation of the full integration of quantitative and qualitative methods throughout all stages of multisite mixed methods case study projects remains a gap in the methodological literature. This article offers advances to the field of mixed methods by detailing the application and integration of mixed methods throughout all stages of one such project; a study of child welfare inequalities. By offering a critical discussion of site selection and the management of confirmatory, expansionary and discordant data, this article contributes to the limited body of mixed methods exemplars specific to this field. We propose that our mixed methods approach provided distinctive insights into a complex social problem, offering expanded understandings of the relationship between poverty, child abuse, and neglect.

Rashid, Y., Rashid, A., Warraich, M. A., Sabir, S. S., & Waseem, A. (2019). Case Study Method: A Step-by-Step Guide for Business Researchers .  International Journal of Qualitative Methods .  https://doi.org/10.1177/1609406919862424

Abstract. Qualitative case study methodology enables researchers to conduct an in-depth exploration of intricate phenomena within some specific context. By keeping in mind research students, this article presents a systematic step-by-step guide to conduct a case study in the business discipline. Research students belonging to said discipline face issues in terms of clarity, selection, and operationalization of qualitative case study while doing their final dissertation. These issues often lead to confusion, wastage of valuable time, and wrong decisions that affect the overall outcome of the research. This article presents a checklist comprised of four phases, that is, foundation phase, prefield phase, field phase, and reporting phase. The objective of this article is to provide novice researchers with practical application of this checklist by linking all its four phases with the authors’ experiences and learning from recently conducted in-depth multiple case studies in the organizations of New Zealand. Rather than discussing case study in general, a targeted step-by-step plan with real-time research examples to conduct a case study is given.

VanWynsberghe, R., & Khan, S. (2007). Redefining Case Study. International Journal of Qualitative Methods, 80–94. https://doi.org/10.1177/160940690700600208

Abstract. In this paper the authors propose a more precise and encompassing definition of case study than is usually found. They support their definition by clarifying that case study is neither a method nor a methodology nor a research design as suggested by others. They use a case study prototype of their own design to propose common properties of case study and demonstrate how these properties support their definition. Next, they present several living myths about case study and refute them in relation to their definition. Finally, they discuss the interplay between the terms case study and unit of analysis to further delineate their definition of case study. The target audiences for this paper include case study researchers, research design and methods instructors, and graduate students interested in case study research.

More Sage Research Methods Community Posts about Case Study Research

Use research cases as the basis for individual or team activities that build skills.

Find an 10-step process for using research cases to teach methods with learning activities for individual students, teams, or small groups. (Or use the approach yourself!)

How do you decide which methodology fits your study? In this dialogue Linda Bloomberg and Janet Boberg explain the importance of a strategic approach to qualitative research design that stresses alignment with the purpose of the study.

Case study methods are used by researchers in many disciplines. Here are some open-access articles about multimodal qualitative or mixed methods designs that include both qualitative and quantitative elements.

Case study methodology is both unique, and uniquely confusing. It is unique given one characteristic: case studies draw from more than one data source.

What is case study methodology? It is unique given one characteristic: case studies draw from more than one data source. In this post find definitions and a collection of multidisciplinary examples.

Find discussion of case studies and published examples.

Istanbul as a regional computational social science hub

Experiments and quantitative research.

The Ultimate Guide to Qualitative Research - Part 1: The Basics

• Introduction and overview
• What is qualitative research?
• What is qualitative data?
• Examples of qualitative data
• Qualitative vs. quantitative research
• Mixed methods
• Qualitative research preparation
• Theoretical perspective
• Theoretical framework
• Literature reviews

Research question

• Conceptual framework
• Conceptual vs. theoretical framework

Data collection

• Qualitative research methods
• Focus groups
• Observational research

What is a case study?

Applications for case study research, what is a good case study, process of case study design, benefits and limitations of case studies.

• Ethnographical research
• Ethical considerations
• Confidentiality and privacy
• Power dynamics
• Reflexivity

Case studies

Case studies are essential to qualitative research , offering a lens through which researchers can investigate complex phenomena within their real-life contexts. This chapter explores the concept, purpose, applications, examples, and types of case studies and provides guidance on how to conduct case study research effectively.

Whereas quantitative methods look at phenomena at scale, case study research looks at a concept or phenomenon in considerable detail. While analyzing a single case can help understand one perspective regarding the object of research inquiry, analyzing multiple cases can help obtain a more holistic sense of the topic or issue. Let's provide a basic definition of a case study, then explore its characteristics and role in the qualitative research process.

Definition of a case study

A case study in qualitative research is a strategy of inquiry that involves an in-depth investigation of a phenomenon within its real-world context. It provides researchers with the opportunity to acquire an in-depth understanding of intricate details that might not be as apparent or accessible through other methods of research. The specific case or cases being studied can be a single person, group, or organization – demarcating what constitutes a relevant case worth studying depends on the researcher and their research question .

Among qualitative research methods , a case study relies on multiple sources of evidence, such as documents, artifacts, interviews , or observations , to present a complete and nuanced understanding of the phenomenon under investigation. The objective is to illuminate the readers' understanding of the phenomenon beyond its abstract statistical or theoretical explanations.

Characteristics of case studies

Case studies typically possess a number of distinct characteristics that set them apart from other research methods. These characteristics include a focus on holistic description and explanation, flexibility in the design and data collection methods, reliance on multiple sources of evidence, and emphasis on the context in which the phenomenon occurs.

Furthermore, case studies can often involve a longitudinal examination of the case, meaning they study the case over a period of time. These characteristics allow case studies to yield comprehensive, in-depth, and richly contextualized insights about the phenomenon of interest.

The role of case studies in research

Case studies hold a unique position in the broader landscape of research methods aimed at theory development. They are instrumental when the primary research interest is to gain an intensive, detailed understanding of a phenomenon in its real-life context.

In addition, case studies can serve different purposes within research - they can be used for exploratory, descriptive, or explanatory purposes, depending on the research question and objectives. This flexibility and depth make case studies a valuable tool in the toolkit of qualitative researchers.

Remember, a well-conducted case study can offer a rich, insightful contribution to both academic and practical knowledge through theory development or theory verification, thus enhancing our understanding of complex phenomena in their real-world contexts.

What is the purpose of a case study?

Case study research aims for a more comprehensive understanding of phenomena, requiring various research methods to gather information for qualitative analysis . Ultimately, a case study can allow the researcher to gain insight into a particular object of inquiry and develop a theoretical framework relevant to the research inquiry.

Why use case studies in qualitative research?

Using case studies as a research strategy depends mainly on the nature of the research question and the researcher's access to the data.

Conducting case study research provides a level of detail and contextual richness that other research methods might not offer. They are beneficial when there's a need to understand complex social phenomena within their natural contexts.

The explanatory, exploratory, and descriptive roles of case studies

Case studies can take on various roles depending on the research objectives. They can be exploratory when the research aims to discover new phenomena or define new research questions; they are descriptive when the objective is to depict a phenomenon within its context in a detailed manner; and they can be explanatory if the goal is to understand specific relationships within the studied context. Thus, the versatility of case studies allows researchers to approach their topic from different angles, offering multiple ways to uncover and interpret the data .

The impact of case studies on knowledge development

Case studies play a significant role in knowledge development across various disciplines. Analysis of cases provides an avenue for researchers to explore phenomena within their context based on the collected data.

This can result in the production of rich, practical insights that can be instrumental in both theory-building and practice. Case studies allow researchers to delve into the intricacies and complexities of real-life situations, uncovering insights that might otherwise remain hidden.

Types of case studies

In qualitative research , a case study is not a one-size-fits-all approach. Depending on the nature of the research question and the specific objectives of the study, researchers might choose to use different types of case studies. These types differ in their focus, methodology, and the level of detail they provide about the phenomenon under investigation.

Understanding these types is crucial for selecting the most appropriate approach for your research project and effectively achieving your research goals. Let's briefly look at the main types of case studies.

Exploratory case studies

Exploratory case studies are typically conducted to develop a theory or framework around an understudied phenomenon. They can also serve as a precursor to a larger-scale research project. Exploratory case studies are useful when a researcher wants to identify the key issues or questions which can spur more extensive study or be used to develop propositions for further research. These case studies are characterized by flexibility, allowing researchers to explore various aspects of a phenomenon as they emerge, which can also form the foundation for subsequent studies.

Descriptive case studies

Descriptive case studies aim to provide a complete and accurate representation of a phenomenon or event within its context. These case studies are often based on an established theoretical framework, which guides how data is collected and analyzed. The researcher is concerned with describing the phenomenon in detail, as it occurs naturally, without trying to influence or manipulate it.

Explanatory case studies

Explanatory case studies are focused on explanation - they seek to clarify how or why certain phenomena occur. Often used in complex, real-life situations, they can be particularly valuable in clarifying causal relationships among concepts and understanding the interplay between different factors within a specific context.

Intrinsic, instrumental, and collective case studies

These three categories of case studies focus on the nature and purpose of the study. An intrinsic case study is conducted when a researcher has an inherent interest in the case itself. Instrumental case studies are employed when the case is used to provide insight into a particular issue or phenomenon. A collective case study, on the other hand, involves studying multiple cases simultaneously to investigate some general phenomena.

Each type of case study serves a different purpose and has its own strengths and challenges. The selection of the type should be guided by the research question and objectives, as well as the context and constraints of the research.

The flexibility, depth, and contextual richness offered by case studies make this approach an excellent research method for various fields of study. They enable researchers to investigate real-world phenomena within their specific contexts, capturing nuances that other research methods might miss. Across numerous fields, case studies provide valuable insights into complex issues.

Critical information systems research

Case studies provide a detailed understanding of the role and impact of information systems in different contexts. They offer a platform to explore how information systems are designed, implemented, and used and how they interact with various social, economic, and political factors. Case studies in this field often focus on examining the intricate relationship between technology, organizational processes, and user behavior, helping to uncover insights that can inform better system design and implementation.

Health research

Health research is another field where case studies are highly valuable. They offer a way to explore patient experiences, healthcare delivery processes, and the impact of various interventions in a real-world context.

Case studies can provide a deep understanding of a patient's journey, giving insights into the intricacies of disease progression, treatment effects, and the psychosocial aspects of health and illness.

Asthma research studies

Specifically within medical research, studies on asthma often employ case studies to explore the individual and environmental factors that influence asthma development, management, and outcomes. A case study can provide rich, detailed data about individual patients' experiences, from the triggers and symptoms they experience to the effectiveness of various management strategies. This can be crucial for developing patient-centered asthma care approaches.

Other fields

Apart from the fields mentioned, case studies are also extensively used in business and management research, education research, and political sciences, among many others. They provide an opportunity to delve into the intricacies of real-world situations, allowing for a comprehensive understanding of various phenomena.

Case studies, with their depth and contextual focus, offer unique insights across these varied fields. They allow researchers to illuminate the complexities of real-life situations, contributing to both theory and practice.

Whatever field you're in, ATLAS.ti puts your data to work for you

Download a free trial of ATLAS.ti to turn your data into insights.

Understanding the key elements of case study design is crucial for conducting rigorous and impactful case study research. A well-structured design guides the researcher through the process, ensuring that the study is methodologically sound and its findings are reliable and valid. The main elements of case study design include the research question , propositions, units of analysis, and the logic linking the data to the propositions.

The research question is the foundation of any research study. A good research question guides the direction of the study and informs the selection of the case, the methods of collecting data, and the analysis techniques. A well-formulated research question in case study research is typically clear, focused, and complex enough to merit further detailed examination of the relevant case(s).

Propositions

Propositions, though not necessary in every case study, provide a direction by stating what we might expect to find in the data collected. They guide how data is collected and analyzed by helping researchers focus on specific aspects of the case. They are particularly important in explanatory case studies, which seek to understand the relationships among concepts within the studied phenomenon.

Units of analysis

The unit of analysis refers to the case, or the main entity or entities that are being analyzed in the study. In case study research, the unit of analysis can be an individual, a group, an organization, a decision, an event, or even a time period. It's crucial to clearly define the unit of analysis, as it shapes the qualitative data analysis process by allowing the researcher to analyze a particular case and synthesize analysis across multiple case studies to draw conclusions.

Argumentation

This refers to the inferential model that allows researchers to draw conclusions from the data. The researcher needs to ensure that there is a clear link between the data, the propositions (if any), and the conclusions drawn. This argumentation is what enables the researcher to make valid and credible inferences about the phenomenon under study.

Understanding and carefully considering these elements in the design phase of a case study can significantly enhance the quality of the research. It can help ensure that the study is methodologically sound and its findings contribute meaningful insights about the case.

Ready to jumpstart your research with ATLAS.ti?

Conceptualize your research project with our intuitive data analysis interface. Download a free trial today.

Conducting a case study involves several steps, from defining the research question and selecting the case to collecting and analyzing data . This section outlines these key stages, providing a practical guide on how to conduct case study research.

Defining the research question

The first step in case study research is defining a clear, focused research question. This question should guide the entire research process, from case selection to analysis. It's crucial to ensure that the research question is suitable for a case study approach. Typically, such questions are exploratory or descriptive in nature and focus on understanding a phenomenon within its real-life context.

Selecting and defining the case

The selection of the case should be based on the research question and the objectives of the study. It involves choosing a unique example or a set of examples that provide rich, in-depth data about the phenomenon under investigation. After selecting the case, it's crucial to define it clearly, setting the boundaries of the case, including the time period and the specific context.

Previous research can help guide the case study design. When considering a case study, an example of a case could be taken from previous case study research and used to define cases in a new research inquiry. Considering recently published examples can help understand how to select and define cases effectively.

Developing a detailed case study protocol

A case study protocol outlines the procedures and general rules to be followed during the case study. This includes the data collection methods to be used, the sources of data, and the procedures for analysis. Having a detailed case study protocol ensures consistency and reliability in the study.

The protocol should also consider how to work with the people involved in the research context to grant the research team access to collecting data. As mentioned in previous sections of this guide, establishing rapport is an essential component of qualitative research as it shapes the overall potential for collecting and analyzing data.

Collecting data

Gathering data in case study research often involves multiple sources of evidence, including documents, archival records, interviews, observations, and physical artifacts. This allows for a comprehensive understanding of the case. The process for gathering data should be systematic and carefully documented to ensure the reliability and validity of the study.

Analyzing and interpreting data

The next step is analyzing the data. This involves organizing the data , categorizing it into themes or patterns , and interpreting these patterns to answer the research question. The analysis might also involve comparing the findings with prior research or theoretical propositions.

Writing the case study report

The final step is writing the case study report . This should provide a detailed description of the case, the data, the analysis process, and the findings. The report should be clear, organized, and carefully written to ensure that the reader can understand the case and the conclusions drawn from it.

Each of these steps is crucial in ensuring that the case study research is rigorous, reliable, and provides valuable insights about the case.

The type, depth, and quality of data in your study can significantly influence the validity and utility of the study. In case study research, data is usually collected from multiple sources to provide a comprehensive and nuanced understanding of the case. This section will outline the various methods of collecting data used in case study research and discuss considerations for ensuring the quality of the data.

Interviews are a common method of gathering data in case study research. They can provide rich, in-depth data about the perspectives, experiences, and interpretations of the individuals involved in the case. Interviews can be structured , semi-structured , or unstructured , depending on the research question and the degree of flexibility needed.

Observations

Observations involve the researcher observing the case in its natural setting, providing first-hand information about the case and its context. Observations can provide data that might not be revealed in interviews or documents, such as non-verbal cues or contextual information.

Documents and artifacts

Documents and archival records provide a valuable source of data in case study research. They can include reports, letters, memos, meeting minutes, email correspondence, and various public and private documents related to the case.

These records can provide historical context, corroborate evidence from other sources, and offer insights into the case that might not be apparent from interviews or observations.

Physical artifacts refer to any physical evidence related to the case, such as tools, products, or physical environments. These artifacts can provide tangible insights into the case, complementing the data gathered from other sources.

Ensuring the quality of data collection

Determining the quality of data in case study research requires careful planning and execution. It's crucial to ensure that the data is reliable, accurate, and relevant to the research question. This involves selecting appropriate methods of collecting data, properly training interviewers or observers, and systematically recording and storing the data. It also includes considering ethical issues related to collecting and handling data, such as obtaining informed consent and ensuring the privacy and confidentiality of the participants.

Data analysis

Analyzing case study research involves making sense of the rich, detailed data to answer the research question. This process can be challenging due to the volume and complexity of case study data. However, a systematic and rigorous approach to analysis can ensure that the findings are credible and meaningful. This section outlines the main steps and considerations in analyzing data in case study research.

Organizing the data

The first step in the analysis is organizing the data. This involves sorting the data into manageable sections, often according to the data source or the theme. This step can also involve transcribing interviews, digitizing physical artifacts, or organizing observational data.

Categorizing and coding the data

Once the data is organized, the next step is to categorize or code the data. This involves identifying common themes, patterns, or concepts in the data and assigning codes to relevant data segments. Coding can be done manually or with the help of software tools, and in either case, qualitative analysis software can greatly facilitate the entire coding process. Coding helps to reduce the data to a set of themes or categories that can be more easily analyzed.

Identifying patterns and themes

After coding the data, the researcher looks for patterns or themes in the coded data. This involves comparing and contrasting the codes and looking for relationships or patterns among them. The identified patterns and themes should help answer the research question.

Interpreting the data

Once patterns and themes have been identified, the next step is to interpret these findings. This involves explaining what the patterns or themes mean in the context of the research question and the case. This interpretation should be grounded in the data, but it can also involve drawing on theoretical concepts or prior research.

Verification of the data

The last step in the analysis is verification. This involves checking the accuracy and consistency of the analysis process and confirming that the findings are supported by the data. This can involve re-checking the original data, checking the consistency of codes, or seeking feedback from research participants or peers.

Like any research method , case study research has its strengths and limitations. Researchers must be aware of these, as they can influence the design, conduct, and interpretation of the study.

Understanding the strengths and limitations of case study research can also guide researchers in deciding whether this approach is suitable for their research question . This section outlines some of the key strengths and limitations of case study research.

Benefits include the following:

• Rich, detailed data: One of the main strengths of case study research is that it can generate rich, detailed data about the case. This can provide a deep understanding of the case and its context, which can be valuable in exploring complex phenomena.
• Flexibility: Case study research is flexible in terms of design , data collection , and analysis . A sufficient degree of flexibility allows the researcher to adapt the study according to the case and the emerging findings.
• Real-world context: Case study research involves studying the case in its real-world context, which can provide valuable insights into the interplay between the case and its context.
• Multiple sources of evidence: Case study research often involves collecting data from multiple sources , which can enhance the robustness and validity of the findings.

On the other hand, researchers should consider the following limitations:

• Generalizability: A common criticism of case study research is that its findings might not be generalizable to other cases due to the specificity and uniqueness of each case.
• Time and resource intensive: Case study research can be time and resource intensive due to the depth of the investigation and the amount of collected data.
• Complexity of analysis: The rich, detailed data generated in case study research can make analyzing the data challenging.
• Subjectivity: Given the nature of case study research, there may be a higher degree of subjectivity in interpreting the data , so researchers need to reflect on this and transparently convey to audiences how the research was conducted.

Being aware of these strengths and limitations can help researchers design and conduct case study research effectively and interpret and report the findings appropriately.

Ready to analyze your data with ATLAS.ti?

See how our intuitive software can draw key insights from your data with a free trial today.

• Privacy Policy

Home » Case Study – Methods, Examples and Guide

Case Study – Methods, Examples and Guide

Table of Contents

A case study is a research method that involves an in-depth examination and analysis of a particular phenomenon or case, such as an individual, organization, community, event, or situation.

It is a qualitative research approach that aims to provide a detailed and comprehensive understanding of the case being studied. Case studies typically involve multiple sources of data, including interviews, observations, documents, and artifacts, which are analyzed using various techniques, such as content analysis, thematic analysis, and grounded theory. The findings of a case study are often used to develop theories, inform policy or practice, or generate new research questions.

Types of Case Study

Types and Methods of Case Study are as follows:

Single-Case Study

A single-case study is an in-depth analysis of a single case. This type of case study is useful when the researcher wants to understand a specific phenomenon in detail.

For Example , A researcher might conduct a single-case study on a particular individual to understand their experiences with a particular health condition or a specific organization to explore their management practices. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a single-case study are often used to generate new research questions, develop theories, or inform policy or practice.

Multiple-Case Study

A multiple-case study involves the analysis of several cases that are similar in nature. This type of case study is useful when the researcher wants to identify similarities and differences between the cases.

For Example, a researcher might conduct a multiple-case study on several companies to explore the factors that contribute to their success or failure. The researcher collects data from each case, compares and contrasts the findings, and uses various techniques to analyze the data, such as comparative analysis or pattern-matching. The findings of a multiple-case study can be used to develop theories, inform policy or practice, or generate new research questions.

Exploratory Case Study

An exploratory case study is used to explore a new or understudied phenomenon. This type of case study is useful when the researcher wants to generate hypotheses or theories about the phenomenon.

For Example, a researcher might conduct an exploratory case study on a new technology to understand its potential impact on society. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as grounded theory or content analysis. The findings of an exploratory case study can be used to generate new research questions, develop theories, or inform policy or practice.

Descriptive Case Study

A descriptive case study is used to describe a particular phenomenon in detail. This type of case study is useful when the researcher wants to provide a comprehensive account of the phenomenon.

For Example, a researcher might conduct a descriptive case study on a particular community to understand its social and economic characteristics. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a descriptive case study can be used to inform policy or practice or generate new research questions.

Instrumental Case Study

An instrumental case study is used to understand a particular phenomenon that is instrumental in achieving a particular goal. This type of case study is useful when the researcher wants to understand the role of the phenomenon in achieving the goal.

For Example, a researcher might conduct an instrumental case study on a particular policy to understand its impact on achieving a particular goal, such as reducing poverty. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of an instrumental case study can be used to inform policy or practice or generate new research questions.

Case Study Data Collection Methods

Here are some common data collection methods for case studies:

Interviews involve asking questions to individuals who have knowledge or experience relevant to the case study. Interviews can be structured (where the same questions are asked to all participants) or unstructured (where the interviewer follows up on the responses with further questions). Interviews can be conducted in person, over the phone, or through video conferencing.

Observations

Observations involve watching and recording the behavior and activities of individuals or groups relevant to the case study. Observations can be participant (where the researcher actively participates in the activities) or non-participant (where the researcher observes from a distance). Observations can be recorded using notes, audio or video recordings, or photographs.

Documents can be used as a source of information for case studies. Documents can include reports, memos, emails, letters, and other written materials related to the case study. Documents can be collected from the case study participants or from public sources.

Surveys involve asking a set of questions to a sample of individuals relevant to the case study. Surveys can be administered in person, over the phone, through mail or email, or online. Surveys can be used to gather information on attitudes, opinions, or behaviors related to the case study.

Artifacts are physical objects relevant to the case study. Artifacts can include tools, equipment, products, or other objects that provide insights into the case study phenomenon.

How to conduct Case Study Research

Conducting a case study research involves several steps that need to be followed to ensure the quality and rigor of the study. Here are the steps to conduct case study research:

• Define the research questions: The first step in conducting a case study research is to define the research questions. The research questions should be specific, measurable, and relevant to the case study phenomenon under investigation.
• Select the case: The next step is to select the case or cases to be studied. The case should be relevant to the research questions and should provide rich and diverse data that can be used to answer the research questions.
• Collect data: Data can be collected using various methods, such as interviews, observations, documents, surveys, and artifacts. The data collection method should be selected based on the research questions and the nature of the case study phenomenon.
• Analyze the data: The data collected from the case study should be analyzed using various techniques, such as content analysis, thematic analysis, or grounded theory. The analysis should be guided by the research questions and should aim to provide insights and conclusions relevant to the research questions.
• Draw conclusions: The conclusions drawn from the case study should be based on the data analysis and should be relevant to the research questions. The conclusions should be supported by evidence and should be clearly stated.
• Validate the findings: The findings of the case study should be validated by reviewing the data and the analysis with participants or other experts in the field. This helps to ensure the validity and reliability of the findings.
• Write the report: The final step is to write the report of the case study research. The report should provide a clear description of the case study phenomenon, the research questions, the data collection methods, the data analysis, the findings, and the conclusions. The report should be written in a clear and concise manner and should follow the guidelines for academic writing.

Examples of Case Study

Here are some examples of case study research:

• The Hawthorne Studies : Conducted between 1924 and 1932, the Hawthorne Studies were a series of case studies conducted by Elton Mayo and his colleagues to examine the impact of work environment on employee productivity. The studies were conducted at the Hawthorne Works plant of the Western Electric Company in Chicago and included interviews, observations, and experiments.
• The Stanford Prison Experiment: Conducted in 1971, the Stanford Prison Experiment was a case study conducted by Philip Zimbardo to examine the psychological effects of power and authority. The study involved simulating a prison environment and assigning participants to the role of guards or prisoners. The study was controversial due to the ethical issues it raised.
• The Challenger Disaster: The Challenger Disaster was a case study conducted to examine the causes of the Space Shuttle Challenger explosion in 1986. The study included interviews, observations, and analysis of data to identify the technical, organizational, and cultural factors that contributed to the disaster.
• The Enron Scandal: The Enron Scandal was a case study conducted to examine the causes of the Enron Corporation’s bankruptcy in 2001. The study included interviews, analysis of financial data, and review of documents to identify the accounting practices, corporate culture, and ethical issues that led to the company’s downfall.
• The Fukushima Nuclear Disaster : The Fukushima Nuclear Disaster was a case study conducted to examine the causes of the nuclear accident that occurred at the Fukushima Daiichi Nuclear Power Plant in Japan in 2011. The study included interviews, analysis of data, and review of documents to identify the technical, organizational, and cultural factors that contributed to the disaster.

Application of Case Study

Case studies have a wide range of applications across various fields and industries. Here are some examples:

Business and Management

Case studies are widely used in business and management to examine real-life situations and develop problem-solving skills. Case studies can help students and professionals to develop a deep understanding of business concepts, theories, and best practices.

Case studies are used in healthcare to examine patient care, treatment options, and outcomes. Case studies can help healthcare professionals to develop critical thinking skills, diagnose complex medical conditions, and develop effective treatment plans.

Case studies are used in education to examine teaching and learning practices. Case studies can help educators to develop effective teaching strategies, evaluate student progress, and identify areas for improvement.

Social Sciences

Case studies are widely used in social sciences to examine human behavior, social phenomena, and cultural practices. Case studies can help researchers to develop theories, test hypotheses, and gain insights into complex social issues.

Law and Ethics

Case studies are used in law and ethics to examine legal and ethical dilemmas. Case studies can help lawyers, policymakers, and ethical professionals to develop critical thinking skills, analyze complex cases, and make informed decisions.

Purpose of Case Study

The purpose of a case study is to provide a detailed analysis of a specific phenomenon, issue, or problem in its real-life context. A case study is a qualitative research method that involves the in-depth exploration and analysis of a particular case, which can be an individual, group, organization, event, or community.

The primary purpose of a case study is to generate a comprehensive and nuanced understanding of the case, including its history, context, and dynamics. Case studies can help researchers to identify and examine the underlying factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and detailed understanding of the case, which can inform future research, practice, or policy.

Case studies can also serve other purposes, including:

• Illustrating a theory or concept: Case studies can be used to illustrate and explain theoretical concepts and frameworks, providing concrete examples of how they can be applied in real-life situations.
• Developing hypotheses: Case studies can help to generate hypotheses about the causal relationships between different factors and outcomes, which can be tested through further research.
• Providing insight into complex issues: Case studies can provide insights into complex and multifaceted issues, which may be difficult to understand through other research methods.
• Informing practice or policy: Case studies can be used to inform practice or policy by identifying best practices, lessons learned, or areas for improvement.

Advantages of Case Study Research

There are several advantages of case study research, including:

• In-depth exploration: Case study research allows for a detailed exploration and analysis of a specific phenomenon, issue, or problem in its real-life context. This can provide a comprehensive understanding of the case and its dynamics, which may not be possible through other research methods.
• Rich data: Case study research can generate rich and detailed data, including qualitative data such as interviews, observations, and documents. This can provide a nuanced understanding of the case and its complexity.
• Holistic perspective: Case study research allows for a holistic perspective of the case, taking into account the various factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and comprehensive understanding of the case.
• Theory development: Case study research can help to develop and refine theories and concepts by providing empirical evidence and concrete examples of how they can be applied in real-life situations.
• Practical application: Case study research can inform practice or policy by identifying best practices, lessons learned, or areas for improvement.
• Contextualization: Case study research takes into account the specific context in which the case is situated, which can help to understand how the case is influenced by the social, cultural, and historical factors of its environment.

Limitations of Case Study Research

There are several limitations of case study research, including:

• Limited generalizability : Case studies are typically focused on a single case or a small number of cases, which limits the generalizability of the findings. The unique characteristics of the case may not be applicable to other contexts or populations, which may limit the external validity of the research.
• Biased sampling: Case studies may rely on purposive or convenience sampling, which can introduce bias into the sample selection process. This may limit the representativeness of the sample and the generalizability of the findings.
• Subjectivity: Case studies rely on the interpretation of the researcher, which can introduce subjectivity into the analysis. The researcher’s own biases, assumptions, and perspectives may influence the findings, which may limit the objectivity of the research.
• Limited control: Case studies are typically conducted in naturalistic settings, which limits the control that the researcher has over the environment and the variables being studied. This may limit the ability to establish causal relationships between variables.
• Time-consuming: Case studies can be time-consuming to conduct, as they typically involve a detailed exploration and analysis of a specific case. This may limit the feasibility of conducting multiple case studies or conducting case studies in a timely manner.
• Resource-intensive: Case studies may require significant resources, including time, funding, and expertise. This may limit the ability of researchers to conduct case studies in resource-constrained settings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Quantitative Research – Methods, Types and...

Descriptive Research Design – Types, Methods and...

Triangulation in Research – Types, Methods and...

Phenomenology – Methods, Examples and Guide

Qualitative Research Methods

Explanatory Research – Types, Methods, Guide

• How it works

A Quick Guide to Case Study with Examples

Published by Alvin Nicolas at August 14th, 2021 , Revised On August 29, 2023

A case study is a documented history and detailed analysis of a situation concerning organisations, industries, and markets.

A case study:

• Focuses on discovering new facts of the situation under observation.
• Includes data collection from multiple sources over time.
• Widely used in social sciences to study the underlying information, organisation, community, or event.
• It does not provide any solution to the problem .

When to Use Case Study? 

You can use a case study in your research when:

• The focus of your study is to find answers to how and why questions .
• You don’t have enough time to conduct extensive research; case studies are convenient for completing your project successfully.
• You want to analyse real-world problems in-depth, then you can use the method of the case study.

You can consider a single case to gain in-depth knowledge about the subject, or you can choose multiple cases to know about various aspects of your  research problem .

What are the Aims of the Case Study?

• The case study aims at identifying weak areas that can be improved.
• This method is often used for idiographic research (focuses on individual cases or events).
• Another aim of the case study is nomothetic research (aims to discover new theories through data analysis of multiple cases).

Types of Case Studies

There are different types of case studies that can be categorised based on the purpose of the investigation.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of STEM disciplines. Guaranteeing 100% satisfaction!

How to Conduct a Case Study?

• Select the Case to Investigate
• Formulate the Research Question
• Review of Literature
• Choose the Precise Case to Use in your Study
• Select Data Collection and Analysis Techniques
• Collect the Data
• Analyse the Data
• Prepare the Report

Step1: Select the Case to Investigate

The first step is to select a case to conduct your investigation. You should remember the following points.

• Make sure that you perform the study in the available timeframe.
• There should not be too much information available about the organisation.
• You should be able to get access to the organisation.
• There should be enough information available about the subject to conduct further research.

Step2: Formulate the Research Question

It’s necessary to  formulate a research question  to proceed with your case study. Most of the research questions begin with  how, why, what, or what can . 

You can also use a research statement instead of a research question to conduct your research which can be conditional or non-conditional. 

Step 3: Review of Literature

Once you formulate your research statement or question, you need to extensively  review the documentation about the existing discoveries related to your research question or statement.

Step 4: Choose the Precise Case to Use in your Study

You need to select a specific case or multiple cases related to your research. It would help if you treated each case individually while using multiple cases. The outcomes of each case can be used as contributors to the outcomes of the entire study.  You can select the following cases. 

• Representing various geographic regions
• Cases with various size parameters
• Explaining the existing theories or assumptions
• Leading to discoveries
• Providing a base for future research.

Step 5: Select Data Collection and Analysis Techniques

You can choose both  qualitative or quantitative approaches  for  collecting the data . You can use  interviews ,  surveys , artifacts, documentation, newspapers, and photographs, etc. To avoid biased observation, you can triangulate  your research to provide different views of your case. Even if you are focusing on a single case, you need to observe various case angles. It would help if you constructed validity, internal and external validity, as well as reliability.

Example: Identifying the impacts of contaminated water on people’s health and the factors responsible for it. You need to gather the data using qualitative and quantitative approaches to understand the case in such cases.

Construct validity:  You should select the most suitable measurement tool for your research. 

Internal validity:   You should use various methodological tools to  triangulate  the data. Try different methods to study the same hypothesis.

External validity:  You need to effectively apply the data beyond the case’s circumstances to more general issues.

Reliability:   You need to be confident enough to formulate the new direction for future studies based on your findings.

Also Read:  Reliability and Validity

Step 6: Collect the Data

Beware of the following when collecting data:

• Information should be gathered systematically, and the collected evidence from various sources should contribute to your research objectives.
• Don’t collect your data randomly.
• Recheck your research questions to avoid mistakes.
• You should save the collected data in any popular format for clear understanding.
• While making any changes to collecting information, make sure to record the changes in a document.
• You should maintain a case diary and note your opinions and thoughts evolved throughout the study.

Step 7: Analyse the Data

The research data identifies the relationship between the objects of study and the research questions or statements. You need to reconfirm the collected information and tabulate it correctly for better understanding. 

Step 8: Prepare the Report

It’s essential to prepare a report for your case study. You can write your case study in the form of a scientific paper or thesis discussing its detail with supporting evidence. 

A case study can be represented by incorporating  quotations,  stories, anecdotes,  interview transcripts , etc., with empirical data in the result section. 

You can also write it in narrative styles using  textual analysis  or   discourse analysis . Your report should also include evidence from published literature, and you can put it in the discussion section.

Advantages and Disadvantages of Case Study

Frequently Asked Questions

What is the case study.

A case study is a research method where a specific instance, event, or situation is deeply examined to gain insights into real-world complexities. It involves detailed analysis of context, data, and variables to understand patterns, causes, and effects, often used in various disciplines for in-depth exploration.

You May Also Like

A confounding variable can potentially affect both the suspected cause and the suspected effect. Here is all you need to know about accounting for confounding variables in research.

Descriptive research is carried out to describe current issues, programs, and provides information about the issue through surveys and various fact-finding methods.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Case Reports

Case Study Research

• November 2019
• In book: Methodological Issues in Management Research: Advances, Challenges, and the Way Ahead (pp.163-179)
• This person is not on ResearchGate, or hasn't claimed this research yet.

• Institute of Rural Management Anand

Discover the world's research

• 25+ million members
• 160+ million publication pages
• 2.3+ billion citations
• Hangrengga Berlian
• Bram Hertasning
• Hibnu Nugroho

• Ida Bagus Gede Surya Peradantha
• Sri Rochana Widyastutieningrum
• Santosa Soewarlan
• Ida Bagus Gde Yudha Triguna
• Melisa Melisa

• Edward Noel Mwamakula

• Nondwe Nomnikelo Mzokwana

• Rana Fathinah Maharani

• Jarmila Klugerová
• Pier Franco Luigi Fraboni
• Matthew Barsalou
• Robert Perkin

• Bob Algozzine

• Y.S. Lincoln
• Sharan B. Merriam
• Kathleen M. Eisenhardt
• A.M. Huberman

• Recruit researchers
• Join for free
• Login Email Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google Welcome back! Please log in. Email · Hint Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google No account? Sign up

• Open access
• Published: 27 June 2011

The case study approach

• Sarah Crowe 1 ,
• Kathrin Cresswell 2 ,
• Ann Robertson 2 ,
• Guro Huby 3 ,
• Anthony Avery 1 &
• Aziz Sheikh 2  

BMC Medical Research Methodology volume  11 , Article number:  100 ( 2011 ) Cite this article

798k Accesses

1122 Citations

41 Altmetric

Metrics details

The case study approach allows in-depth, multi-faceted explorations of complex issues in their real-life settings. The value of the case study approach is well recognised in the fields of business, law and policy, but somewhat less so in health services research. Based on our experiences of conducting several health-related case studies, we reflect on the different types of case study design, the specific research questions this approach can help answer, the data sources that tend to be used, and the particular advantages and disadvantages of employing this methodological approach. The paper concludes with key pointers to aid those designing and appraising proposals for conducting case study research, and a checklist to help readers assess the quality of case study reports.

Peer Review reports

Introduction

The case study approach is particularly useful to employ when there is a need to obtain an in-depth appreciation of an issue, event or phenomenon of interest, in its natural real-life context. Our aim in writing this piece is to provide insights into when to consider employing this approach and an overview of key methodological considerations in relation to the design, planning, analysis, interpretation and reporting of case studies.

The illustrative 'grand round', 'case report' and 'case series' have a long tradition in clinical practice and research. Presenting detailed critiques, typically of one or more patients, aims to provide insights into aspects of the clinical case and, in doing so, illustrate broader lessons that may be learnt. In research, the conceptually-related case study approach can be used, for example, to describe in detail a patient's episode of care, explore professional attitudes to and experiences of a new policy initiative or service development or more generally to 'investigate contemporary phenomena within its real-life context' [ 1 ]. Based on our experiences of conducting a range of case studies, we reflect on when to consider using this approach, discuss the key steps involved and illustrate, with examples, some of the practical challenges of attaining an in-depth understanding of a 'case' as an integrated whole. In keeping with previously published work, we acknowledge the importance of theory to underpin the design, selection, conduct and interpretation of case studies[ 2 ]. In so doing, we make passing reference to the different epistemological approaches used in case study research by key theoreticians and methodologists in this field of enquiry.

This paper is structured around the following main questions: What is a case study? What are case studies used for? How are case studies conducted? What are the potential pitfalls and how can these be avoided? We draw in particular on four of our own recently published examples of case studies (see Tables 1 , 2 , 3 and 4 ) and those of others to illustrate our discussion[ 3 – 7 ].

What is a case study?

A case study is a research approach that is used to generate an in-depth, multi-faceted understanding of a complex issue in its real-life context. It is an established research design that is used extensively in a wide variety of disciplines, particularly in the social sciences. A case study can be defined in a variety of ways (Table 5 ), the central tenet being the need to explore an event or phenomenon in depth and in its natural context. It is for this reason sometimes referred to as a "naturalistic" design; this is in contrast to an "experimental" design (such as a randomised controlled trial) in which the investigator seeks to exert control over and manipulate the variable(s) of interest.

Stake's work has been particularly influential in defining the case study approach to scientific enquiry. He has helpfully characterised three main types of case study: intrinsic , instrumental and collective [ 8 ]. An intrinsic case study is typically undertaken to learn about a unique phenomenon. The researcher should define the uniqueness of the phenomenon, which distinguishes it from all others. In contrast, the instrumental case study uses a particular case (some of which may be better than others) to gain a broader appreciation of an issue or phenomenon. The collective case study involves studying multiple cases simultaneously or sequentially in an attempt to generate a still broader appreciation of a particular issue.

These are however not necessarily mutually exclusive categories. In the first of our examples (Table 1 ), we undertook an intrinsic case study to investigate the issue of recruitment of minority ethnic people into the specific context of asthma research studies, but it developed into a instrumental case study through seeking to understand the issue of recruitment of these marginalised populations more generally, generating a number of the findings that are potentially transferable to other disease contexts[ 3 ]. In contrast, the other three examples (see Tables 2 , 3 and 4 ) employed collective case study designs to study the introduction of workforce reconfiguration in primary care, the implementation of electronic health records into hospitals, and to understand the ways in which healthcare students learn about patient safety considerations[ 4 – 6 ]. Although our study focusing on the introduction of General Practitioners with Specialist Interests (Table 2 ) was explicitly collective in design (four contrasting primary care organisations were studied), is was also instrumental in that this particular professional group was studied as an exemplar of the more general phenomenon of workforce redesign[ 4 ].

What are case studies used for?

According to Yin, case studies can be used to explain, describe or explore events or phenomena in the everyday contexts in which they occur[ 1 ]. These can, for example, help to understand and explain causal links and pathways resulting from a new policy initiative or service development (see Tables 2 and 3 , for example)[ 1 ]. In contrast to experimental designs, which seek to test a specific hypothesis through deliberately manipulating the environment (like, for example, in a randomised controlled trial giving a new drug to randomly selected individuals and then comparing outcomes with controls),[ 9 ] the case study approach lends itself well to capturing information on more explanatory ' how ', 'what' and ' why ' questions, such as ' how is the intervention being implemented and received on the ground?'. The case study approach can offer additional insights into what gaps exist in its delivery or why one implementation strategy might be chosen over another. This in turn can help develop or refine theory, as shown in our study of the teaching of patient safety in undergraduate curricula (Table 4 )[ 6 , 10 ]. Key questions to consider when selecting the most appropriate study design are whether it is desirable or indeed possible to undertake a formal experimental investigation in which individuals and/or organisations are allocated to an intervention or control arm? Or whether the wish is to obtain a more naturalistic understanding of an issue? The former is ideally studied using a controlled experimental design, whereas the latter is more appropriately studied using a case study design.

Case studies may be approached in different ways depending on the epistemological standpoint of the researcher, that is, whether they take a critical (questioning one's own and others' assumptions), interpretivist (trying to understand individual and shared social meanings) or positivist approach (orientating towards the criteria of natural sciences, such as focusing on generalisability considerations) (Table 6 ). Whilst such a schema can be conceptually helpful, it may be appropriate to draw on more than one approach in any case study, particularly in the context of conducting health services research. Doolin has, for example, noted that in the context of undertaking interpretative case studies, researchers can usefully draw on a critical, reflective perspective which seeks to take into account the wider social and political environment that has shaped the case[ 11 ].

How are case studies conducted?

Here, we focus on the main stages of research activity when planning and undertaking a case study; the crucial stages are: defining the case; selecting the case(s); collecting and analysing the data; interpreting data; and reporting the findings.

Defining the case

Carefully formulated research question(s), informed by the existing literature and a prior appreciation of the theoretical issues and setting(s), are all important in appropriately and succinctly defining the case[ 8 , 12 ]. Crucially, each case should have a pre-defined boundary which clarifies the nature and time period covered by the case study (i.e. its scope, beginning and end), the relevant social group, organisation or geographical area of interest to the investigator, the types of evidence to be collected, and the priorities for data collection and analysis (see Table 7 )[ 1 ]. A theory driven approach to defining the case may help generate knowledge that is potentially transferable to a range of clinical contexts and behaviours; using theory is also likely to result in a more informed appreciation of, for example, how and why interventions have succeeded or failed[ 13 ].

For example, in our evaluation of the introduction of electronic health records in English hospitals (Table 3 ), we defined our cases as the NHS Trusts that were receiving the new technology[ 5 ]. Our focus was on how the technology was being implemented. However, if the primary research interest had been on the social and organisational dimensions of implementation, we might have defined our case differently as a grouping of healthcare professionals (e.g. doctors and/or nurses). The precise beginning and end of the case may however prove difficult to define. Pursuing this same example, when does the process of implementation and adoption of an electronic health record system really begin or end? Such judgements will inevitably be influenced by a range of factors, including the research question, theory of interest, the scope and richness of the gathered data and the resources available to the research team.

Selecting the case(s)

The decision on how to select the case(s) to study is a very important one that merits some reflection. In an intrinsic case study, the case is selected on its own merits[ 8 ]. The case is selected not because it is representative of other cases, but because of its uniqueness, which is of genuine interest to the researchers. This was, for example, the case in our study of the recruitment of minority ethnic participants into asthma research (Table 1 ) as our earlier work had demonstrated the marginalisation of minority ethnic people with asthma, despite evidence of disproportionate asthma morbidity[ 14 , 15 ]. In another example of an intrinsic case study, Hellstrom et al.[ 16 ] studied an elderly married couple living with dementia to explore how dementia had impacted on their understanding of home, their everyday life and their relationships.

For an instrumental case study, selecting a "typical" case can work well[ 8 ]. In contrast to the intrinsic case study, the particular case which is chosen is of less importance than selecting a case that allows the researcher to investigate an issue or phenomenon. For example, in order to gain an understanding of doctors' responses to health policy initiatives, Som undertook an instrumental case study interviewing clinicians who had a range of responsibilities for clinical governance in one NHS acute hospital trust[ 17 ]. Sampling a "deviant" or "atypical" case may however prove even more informative, potentially enabling the researcher to identify causal processes, generate hypotheses and develop theory.

In collective or multiple case studies, a number of cases are carefully selected. This offers the advantage of allowing comparisons to be made across several cases and/or replication. Choosing a "typical" case may enable the findings to be generalised to theory (i.e. analytical generalisation) or to test theory by replicating the findings in a second or even a third case (i.e. replication logic)[ 1 ]. Yin suggests two or three literal replications (i.e. predicting similar results) if the theory is straightforward and five or more if the theory is more subtle. However, critics might argue that selecting 'cases' in this way is insufficiently reflexive and ill-suited to the complexities of contemporary healthcare organisations.

The selected case study site(s) should allow the research team access to the group of individuals, the organisation, the processes or whatever else constitutes the chosen unit of analysis for the study. Access is therefore a central consideration; the researcher needs to come to know the case study site(s) well and to work cooperatively with them. Selected cases need to be not only interesting but also hospitable to the inquiry [ 8 ] if they are to be informative and answer the research question(s). Case study sites may also be pre-selected for the researcher, with decisions being influenced by key stakeholders. For example, our selection of case study sites in the evaluation of the implementation and adoption of electronic health record systems (see Table 3 ) was heavily influenced by NHS Connecting for Health, the government agency that was responsible for overseeing the National Programme for Information Technology (NPfIT)[ 5 ]. This prominent stakeholder had already selected the NHS sites (through a competitive bidding process) to be early adopters of the electronic health record systems and had negotiated contracts that detailed the deployment timelines.

It is also important to consider in advance the likely burden and risks associated with participation for those who (or the site(s) which) comprise the case study. Of particular importance is the obligation for the researcher to think through the ethical implications of the study (e.g. the risk of inadvertently breaching anonymity or confidentiality) and to ensure that potential participants/participating sites are provided with sufficient information to make an informed choice about joining the study. The outcome of providing this information might be that the emotive burden associated with participation, or the organisational disruption associated with supporting the fieldwork, is considered so high that the individuals or sites decide against participation.

In our example of evaluating implementations of electronic health record systems, given the restricted number of early adopter sites available to us, we sought purposively to select a diverse range of implementation cases among those that were available[ 5 ]. We chose a mixture of teaching, non-teaching and Foundation Trust hospitals, and examples of each of the three electronic health record systems procured centrally by the NPfIT. At one recruited site, it quickly became apparent that access was problematic because of competing demands on that organisation. Recognising the importance of full access and co-operative working for generating rich data, the research team decided not to pursue work at that site and instead to focus on other recruited sites.

Collecting the data

In order to develop a thorough understanding of the case, the case study approach usually involves the collection of multiple sources of evidence, using a range of quantitative (e.g. questionnaires, audits and analysis of routinely collected healthcare data) and more commonly qualitative techniques (e.g. interviews, focus groups and observations). The use of multiple sources of data (data triangulation) has been advocated as a way of increasing the internal validity of a study (i.e. the extent to which the method is appropriate to answer the research question)[ 8 , 18 – 21 ]. An underlying assumption is that data collected in different ways should lead to similar conclusions, and approaching the same issue from different angles can help develop a holistic picture of the phenomenon (Table 2 )[ 4 ].

Brazier and colleagues used a mixed-methods case study approach to investigate the impact of a cancer care programme[ 22 ]. Here, quantitative measures were collected with questionnaires before, and five months after, the start of the intervention which did not yield any statistically significant results. Qualitative interviews with patients however helped provide an insight into potentially beneficial process-related aspects of the programme, such as greater, perceived patient involvement in care. The authors reported how this case study approach provided a number of contextual factors likely to influence the effectiveness of the intervention and which were not likely to have been obtained from quantitative methods alone.

In collective or multiple case studies, data collection needs to be flexible enough to allow a detailed description of each individual case to be developed (e.g. the nature of different cancer care programmes), before considering the emerging similarities and differences in cross-case comparisons (e.g. to explore why one programme is more effective than another). It is important that data sources from different cases are, where possible, broadly comparable for this purpose even though they may vary in nature and depth.

Analysing, interpreting and reporting case studies

Making sense and offering a coherent interpretation of the typically disparate sources of data (whether qualitative alone or together with quantitative) is far from straightforward. Repeated reviewing and sorting of the voluminous and detail-rich data are integral to the process of analysis. In collective case studies, it is helpful to analyse data relating to the individual component cases first, before making comparisons across cases. Attention needs to be paid to variations within each case and, where relevant, the relationship between different causes, effects and outcomes[ 23 ]. Data will need to be organised and coded to allow the key issues, both derived from the literature and emerging from the dataset, to be easily retrieved at a later stage. An initial coding frame can help capture these issues and can be applied systematically to the whole dataset with the aid of a qualitative data analysis software package.

The Framework approach is a practical approach, comprising of five stages (familiarisation; identifying a thematic framework; indexing; charting; mapping and interpretation) , to managing and analysing large datasets particularly if time is limited, as was the case in our study of recruitment of South Asians into asthma research (Table 1 )[ 3 , 24 ]. Theoretical frameworks may also play an important role in integrating different sources of data and examining emerging themes. For example, we drew on a socio-technical framework to help explain the connections between different elements - technology; people; and the organisational settings within which they worked - in our study of the introduction of electronic health record systems (Table 3 )[ 5 ]. Our study of patient safety in undergraduate curricula drew on an evaluation-based approach to design and analysis, which emphasised the importance of the academic, organisational and practice contexts through which students learn (Table 4 )[ 6 ].

Case study findings can have implications both for theory development and theory testing. They may establish, strengthen or weaken historical explanations of a case and, in certain circumstances, allow theoretical (as opposed to statistical) generalisation beyond the particular cases studied[ 12 ]. These theoretical lenses should not, however, constitute a strait-jacket and the cases should not be "forced to fit" the particular theoretical framework that is being employed.

When reporting findings, it is important to provide the reader with enough contextual information to understand the processes that were followed and how the conclusions were reached. In a collective case study, researchers may choose to present the findings from individual cases separately before amalgamating across cases. Care must be taken to ensure the anonymity of both case sites and individual participants (if agreed in advance) by allocating appropriate codes or withholding descriptors. In the example given in Table 3 , we decided against providing detailed information on the NHS sites and individual participants in order to avoid the risk of inadvertent disclosure of identities[ 5 , 25 ].

What are the potential pitfalls and how can these be avoided?

The case study approach is, as with all research, not without its limitations. When investigating the formal and informal ways undergraduate students learn about patient safety (Table 4 ), for example, we rapidly accumulated a large quantity of data. The volume of data, together with the time restrictions in place, impacted on the depth of analysis that was possible within the available resources. This highlights a more general point of the importance of avoiding the temptation to collect as much data as possible; adequate time also needs to be set aside for data analysis and interpretation of what are often highly complex datasets.

Case study research has sometimes been criticised for lacking scientific rigour and providing little basis for generalisation (i.e. producing findings that may be transferable to other settings)[ 1 ]. There are several ways to address these concerns, including: the use of theoretical sampling (i.e. drawing on a particular conceptual framework); respondent validation (i.e. participants checking emerging findings and the researcher's interpretation, and providing an opinion as to whether they feel these are accurate); and transparency throughout the research process (see Table 8 )[ 8 , 18 – 21 , 23 , 26 ]. Transparency can be achieved by describing in detail the steps involved in case selection, data collection, the reasons for the particular methods chosen, and the researcher's background and level of involvement (i.e. being explicit about how the researcher has influenced data collection and interpretation). Seeking potential, alternative explanations, and being explicit about how interpretations and conclusions were reached, help readers to judge the trustworthiness of the case study report. Stake provides a critique checklist for a case study report (Table 9 )[ 8 ].

Conclusions

The case study approach allows, amongst other things, critical events, interventions, policy developments and programme-based service reforms to be studied in detail in a real-life context. It should therefore be considered when an experimental design is either inappropriate to answer the research questions posed or impossible to undertake. Considering the frequency with which implementations of innovations are now taking place in healthcare settings and how well the case study approach lends itself to in-depth, complex health service research, we believe this approach should be more widely considered by researchers. Though inherently challenging, the research case study can, if carefully conceptualised and thoughtfully undertaken and reported, yield powerful insights into many important aspects of health and healthcare delivery.

Yin RK: Case study research, design and method. 2009, London: Sage Publications Ltd., 4

Google Scholar  

Keen J, Packwood T: Qualitative research; case study evaluation. BMJ. 1995, 311: 444-446.

Article   CAS   PubMed   PubMed Central   Google Scholar  

Sheikh A, Halani L, Bhopal R, Netuveli G, Partridge M, Car J, et al: Facilitating the Recruitment of Minority Ethnic People into Research: Qualitative Case Study of South Asians and Asthma. PLoS Med. 2009, 6 (10): 1-11.

Article   Google Scholar  

Pinnock H, Huby G, Powell A, Kielmann T, Price D, Williams S, et al: The process of planning, development and implementation of a General Practitioner with a Special Interest service in Primary Care Organisations in England and Wales: a comparative prospective case study. Report for the National Co-ordinating Centre for NHS Service Delivery and Organisation R&D (NCCSDO). 2008, [ http://www.sdo.nihr.ac.uk/files/project/99-final-report.pdf ]

Robertson A, Cresswell K, Takian A, Petrakaki D, Crowe S, Cornford T, et al: Prospective evaluation of the implementation and adoption of NHS Connecting for Health's national electronic health record in secondary care in England: interim findings. BMJ. 2010, 41: c4564-

Pearson P, Steven A, Howe A, Sheikh A, Ashcroft D, Smith P, the Patient Safety Education Study Group: Learning about patient safety: organisational context and culture in the education of healthcare professionals. J Health Serv Res Policy. 2010, 15: 4-10. 10.1258/jhsrp.2009.009052.

Article   PubMed   Google Scholar  

van Harten WH, Casparie TF, Fisscher OA: The evaluation of the introduction of a quality management system: a process-oriented case study in a large rehabilitation hospital. Health Policy. 2002, 60 (1): 17-37. 10.1016/S0168-8510(01)00187-7.

Stake RE: The art of case study research. 1995, London: Sage Publications Ltd.

Sheikh A, Smeeth L, Ashcroft R: Randomised controlled trials in primary care: scope and application. Br J Gen Pract. 2002, 52 (482): 746-51.

PubMed   PubMed Central   Google Scholar  

King G, Keohane R, Verba S: Designing Social Inquiry. 1996, Princeton: Princeton University Press

Doolin B: Information technology as disciplinary technology: being critical in interpretative research on information systems. Journal of Information Technology. 1998, 13: 301-311. 10.1057/jit.1998.8.

George AL, Bennett A: Case studies and theory development in the social sciences. 2005, Cambridge, MA: MIT Press

Eccles M, the Improved Clinical Effectiveness through Behavioural Research Group (ICEBeRG): Designing theoretically-informed implementation interventions. Implementation Science. 2006, 1: 1-8. 10.1186/1748-5908-1-1.

Article   PubMed Central   Google Scholar  

Netuveli G, Hurwitz B, Levy M, Fletcher M, Barnes G, Durham SR, Sheikh A: Ethnic variations in UK asthma frequency, morbidity, and health-service use: a systematic review and meta-analysis. Lancet. 2005, 365 (9456): 312-7.

Sheikh A, Panesar SS, Lasserson T, Netuveli G: Recruitment of ethnic minorities to asthma studies. Thorax. 2004, 59 (7): 634-

CAS   PubMed   PubMed Central   Google Scholar  

Hellström I, Nolan M, Lundh U: 'We do things together': A case study of 'couplehood' in dementia. Dementia. 2005, 4: 7-22. 10.1177/1471301205049188.

Som CV: Nothing seems to have changed, nothing seems to be changing and perhaps nothing will change in the NHS: doctors' response to clinical governance. International Journal of Public Sector Management. 2005, 18: 463-477. 10.1108/09513550510608903.

Lincoln Y, Guba E: Naturalistic inquiry. 1985, Newbury Park: Sage Publications

Barbour RS: Checklists for improving rigour in qualitative research: a case of the tail wagging the dog?. BMJ. 2001, 322: 1115-1117. 10.1136/bmj.322.7294.1115.

Mays N, Pope C: Qualitative research in health care: Assessing quality in qualitative research. BMJ. 2000, 320: 50-52. 10.1136/bmj.320.7226.50.

Mason J: Qualitative researching. 2002, London: Sage

Brazier A, Cooke K, Moravan V: Using Mixed Methods for Evaluating an Integrative Approach to Cancer Care: A Case Study. Integr Cancer Ther. 2008, 7: 5-17. 10.1177/1534735407313395.

Miles MB, Huberman M: Qualitative data analysis: an expanded sourcebook. 1994, CA: Sage Publications Inc., 2

Pope C, Ziebland S, Mays N: Analysing qualitative data. Qualitative research in health care. BMJ. 2000, 320: 114-116. 10.1136/bmj.320.7227.114.

Cresswell KM, Worth A, Sheikh A: Actor-Network Theory and its role in understanding the implementation of information technology developments in healthcare. BMC Med Inform Decis Mak. 2010, 10 (1): 67-10.1186/1472-6947-10-67.

Article   PubMed   PubMed Central   Google Scholar  

Malterud K: Qualitative research: standards, challenges, and guidelines. Lancet. 2001, 358: 483-488. 10.1016/S0140-6736(01)05627-6.

Article   CAS   PubMed   Google Scholar  

Yin R: Case study research: design and methods. 1994, Thousand Oaks, CA: Sage Publishing, 2

Yin R: Enhancing the quality of case studies in health services research. Health Serv Res. 1999, 34: 1209-1224.

Green J, Thorogood N: Qualitative methods for health research. 2009, Los Angeles: Sage, 2

Howcroft D, Trauth E: Handbook of Critical Information Systems Research, Theory and Application. 2005, Cheltenham, UK: Northampton, MA, USA: Edward Elgar

Book   Google Scholar  

Blakie N: Approaches to Social Enquiry. 1993, Cambridge: Polity Press

Doolin B: Power and resistance in the implementation of a medical management information system. Info Systems J. 2004, 14: 343-362. 10.1111/j.1365-2575.2004.00176.x.

Bloomfield BP, Best A: Management consultants: systems development, power and the translation of problems. Sociological Review. 1992, 40: 533-560.

Shanks G, Parr A: Positivist, single case study research in information systems: A critical analysis. Proceedings of the European Conference on Information Systems. 2003, Naples

Pre-publication history

The pre-publication history for this paper can be accessed here: http://www.biomedcentral.com/1471-2288/11/100/prepub

Download references

Acknowledgements

We are grateful to the participants and colleagues who contributed to the individual case studies that we have drawn on. This work received no direct funding, but it has been informed by projects funded by Asthma UK, the NHS Service Delivery Organisation, NHS Connecting for Health Evaluation Programme, and Patient Safety Research Portfolio. We would also like to thank the expert reviewers for their insightful and constructive feedback. Our thanks are also due to Dr. Allison Worth who commented on an earlier draft of this manuscript.

Author information

Authors and affiliations.

Division of Primary Care, The University of Nottingham, Nottingham, UK

Sarah Crowe & Anthony Avery

Centre for Population Health Sciences, The University of Edinburgh, Edinburgh, UK

Kathrin Cresswell, Ann Robertson & Aziz Sheikh

School of Health in Social Science, The University of Edinburgh, Edinburgh, UK

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Sarah Crowe .

Additional information

Competing interests.

The authors declare that they have no competing interests.

Authors' contributions

AS conceived this article. SC, KC and AR wrote this paper with GH, AA and AS all commenting on various drafts. SC and AS are guarantors.

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article.

Crowe, S., Cresswell, K., Robertson, A. et al. The case study approach. BMC Med Res Methodol 11 , 100 (2011). https://doi.org/10.1186/1471-2288-11-100

Download citation

Received : 29 November 2010

Accepted : 27 June 2011

Published : 27 June 2011

DOI : https://doi.org/10.1186/1471-2288-11-100

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Case Study Approach
• Electronic Health Record System
• Case Study Design
• Case Study Site
• Case Study Report

BMC Medical Research Methodology

ISSN: 1471-2288

• General enquiries: [email protected]

Formulating Research Aims and Objectives

Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.

Research aim emphasizes what needs to be achieved within the scope of the research, by the end of the research process. Achievement of research aim provides answer to the research question.

Research objectives divide research aim into several parts and address each part separately. Research aim specifies WHAT needs to be studied and research objectives comprise a number of steps that address HOW research aim will be achieved.

As a rule of dumb, there would be one research aim and several research objectives. Achievement of each research objective will lead to the achievement of the research aim.

Consider the following as an example:

Research title: Effects of organizational culture on business profitability: a case study of Virgin Atlantic

Research aim: To assess the effects of Virgin Atlantic organizational culture on business profitability

Following research objectives would facilitate the achievement of this aim:

• Analyzing the nature of organizational culture at Virgin Atlantic by September 1, 2022
• Identifying factors impacting Virgin Atlantic organizational culture by September 16, 2022
• Analyzing impacts of Virgin Atlantic organizational culture on employee performances by September 30, 2022
• Providing recommendations to Virgin Atlantic strategic level management in terms of increasing the level of effectiveness of organizational culture by October 5, 2022

Figure below illustrates additional examples in formulating research aims and objectives:

Formulation of research question, aim and objectives

Common mistakes in the formulation of research aim relate to the following:

1. Choosing the topic too broadly . This is the most common mistake. For example, a research title of “an analysis of leadership practices” can be classified as too broad because the title fails to answer the following questions:

a) Which aspects of leadership practices? Leadership has many aspects such as employee motivation, ethical behaviour, strategic planning, change management etc. An attempt to cover all of these aspects of organizational leadership within a single research will result in an unfocused and poor work.

b) An analysis of leadership practices in which country? Leadership practices tend to be different in various countries due to cross-cultural differences, legislations and a range of other region-specific factors. Therefore, a study of leadership practices needs to be country-specific.

c) Analysis of leadership practices in which company or industry? Similar to the point above, analysis of leadership practices needs to take into account industry-specific and/or company-specific differences, and there is no way to conduct a leadership research that relates to all industries and organizations in an equal manner.

Accordingly, as an example “a study into the impacts of ethical behaviour of a leader on the level of employee motivation in US healthcare sector” would be a more appropriate title than simply “An analysis of leadership practices”.

2. Setting an unrealistic aim . Formulation of a research aim that involves in-depth interviews with Apple strategic level management by an undergraduate level student can be specified as a bit over-ambitious. This is because securing an interview with Apple CEO Tim Cook or members of Apple Board of Directors might not be easy. This is an extreme example of course, but you got the idea. Instead, you may aim to interview the manager of your local Apple store and adopt a more feasible strategy to get your dissertation completed.

3. Choosing research methods incompatible with the timeframe available . Conducting interviews with 20 sample group members and collecting primary data through 2 focus groups when only three months left until submission of your dissertation can be very difficult, if not impossible. Accordingly, timeframe available need to be taken into account when formulating research aims and objectives and selecting research methods.

Moreover, research objectives need to be formulated according to SMART principle,

 where the abbreviation stands for specific, measurable, achievable, realistic, and time-bound.

Examples of SMART research objectives

At the conclusion part of your research project you will need to reflect on the level of achievement of research aims and objectives. In case your research aims and objectives are not fully achieved by the end of the study, you will need to discuss the reasons. These may include initial inappropriate formulation of research aims and objectives, effects of other variables that were not considered at the beginning of the research or changes in some circumstances during the research process.

John Dudovskiy

Research Aims, Objectives & Questions

By: David Phair (PhD) and Alexandra Shaeffer (PhD) | June 2022

T he research aims , objectives and research questions (collectively called the “golden thread”) are arguably the most important thing you need to get right when you’re crafting a research proposal , dissertation or thesis . We receive questions almost every day about this “holy trinity” of research and there’s certainly a lot of confusion out there, so we’ve crafted this post to help you navigate your way through the fog.

Overview: The Golden Thread

• What is the golden thread
• What are research aims ( examples )
• What are research objectives ( examples )
• What are research questions ( examples )
• The importance of alignment in the golden thread

What is the “golden thread”?

The golden thread simply refers to the collective research aims , research objectives , and research questions for any given project (i.e., a dissertation, thesis, or research paper ). These three elements are bundled together because it’s extremely important that they align with each other, and that the entire research project aligns with them.

Importantly, the golden thread needs to weave its way through the entirety of any research project , from start to end. In other words, it needs to be very clearly defined right at the beginning of the project (the topic ideation and proposal stage) and it needs to inform almost every decision throughout the rest of the project. For example, your research design and methodology will be heavily influenced by the golden thread (we’ll explain this in more detail later), as well as your literature review.

The research aims, objectives and research questions (the golden thread) define the focus and scope ( the delimitations ) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can “go deep” and really dig into a specific problem or opportunity. They also help keep you on track , as they act as a litmus test for relevance. In other words, if you’re ever unsure whether to include something in your document, simply ask yourself the question, “does this contribute toward my research aims, objectives or questions?”. If it doesn’t, chances are you can drop it.

Alright, enough of the fluffy, conceptual stuff. Let’s get down to business and look at what exactly the research aims, objectives and questions are and outline a few examples to bring these concepts to life.

Research Aims: What are they?

Simply put, the research aim(s) is a statement that reflects the broad overarching goal (s) of the research project. Research aims are fairly high-level (low resolution) as they outline the general direction of the research and what it’s trying to achieve .

Research Aims: Examples

True to the name, research aims usually start with the wording “this research aims to…”, “this research seeks to…”, and so on. For example:

“This research aims to explore employee experiences of digital transformation in retail HR.”   “This study sets out to assess the interaction between student support and self-care on well-being in engineering graduate students”  

As you can see, these research aims provide a high-level description of what the study is about and what it seeks to achieve. They’re not hyper-specific or action-oriented, but they’re clear about what the study’s focus is and what is being investigated.

Need a helping hand?

Research Objectives: What are they?

The research objectives take the research aims and make them more practical and actionable . In other words, the research objectives showcase the steps that the researcher will take to achieve the research aims.

The research objectives need to be far more specific (higher resolution) and actionable than the research aims. In fact, it’s always a good idea to craft your research objectives using the “SMART” criteria. In other words, they should be specific, measurable, achievable, relevant and time-bound”.

Research Objectives: Examples

Let’s look at two examples of research objectives. We’ll stick with the topic and research aims we mentioned previously.  

For the digital transformation topic:

To observe the retail HR employees throughout the digital transformation. To assess employee perceptions of digital transformation in retail HR. To identify the barriers and facilitators of digital transformation in retail HR.

And for the student wellness topic:

To determine whether student self-care predicts the well-being score of engineering graduate students. To determine whether student support predicts the well-being score of engineering students. To assess the interaction between student self-care and student support when predicting well-being in engineering graduate students.

  As you can see, these research objectives clearly align with the previously mentioned research aims and effectively translate the low-resolution aims into (comparatively) higher-resolution objectives and action points . They give the research project a clear focus and present something that resembles a research-based “to-do” list.

Research Questions: What are they?

Finally, we arrive at the all-important research questions. The research questions are, as the name suggests, the key questions that your study will seek to answer . Simply put, they are the core purpose of your dissertation, thesis, or research project. You’ll present them at the beginning of your document (either in the introduction chapter or literature review chapter) and you’ll answer them at the end of your document (typically in the discussion and conclusion chapters).

The research questions will be the driving force throughout the research process. For example, in the literature review chapter, you’ll assess the relevance of any given resource based on whether it helps you move towards answering your research questions. Similarly, your methodology and research design will be heavily influenced by the nature of your research questions. For instance, research questions that are exploratory in nature will usually make use of a qualitative approach, whereas questions that relate to measurement or relationship testing will make use of a quantitative approach.  

Let’s look at some examples of research questions to make this more tangible.

Research Questions: Examples 

Again, we’ll stick with the research aims and research objectives we mentioned previously.  

For the digital transformation topic (which would be qualitative in nature):

How do employees perceive digital transformation in retail HR? What are the barriers and facilitators of digital transformation in retail HR?  

And for the student wellness topic (which would be quantitative in nature):

Does student self-care predict the well-being scores of engineering graduate students? Does student support predict the well-being scores of engineering students? Do student self-care and student support interact when predicting well-being in engineering graduate students?  

You’ll probably notice that there’s quite a formulaic approach to this. In other words, the research questions are basically the research objectives “converted” into question format. While that is true most of the time, it’s not always the case. For example, the first research objective for the digital transformation topic was more or less a step on the path toward the other objectives, and as such, it didn’t warrant its own research question.

So, don’t rush your research questions and sloppily reword your objectives as questions. Carefully think about what exactly you’re trying to achieve (i.e. your research aim) and the objectives you’ve set out, then craft a set of well-aligned research questions . Also, keep in mind that this can be a somewhat iterative process , where you go back and tweak research objectives and aims to ensure tight alignment throughout the golden thread.

The importance of strong alignment

Alignment is the keyword here and we have to stress its importance . Simply put, you need to make sure that there is a very tight alignment between all three pieces of the golden thread. If your research aims and research questions don’t align, for example, your project will be pulling in different directions and will lack focus . This is a common problem students face and can cause many headaches (and tears), so be warned.

Take the time to carefully craft your research aims, objectives and research questions before you run off down the research path. Ideally, get your research supervisor/advisor to review and comment on your golden thread before you invest significant time into your project, and certainly before you start collecting data .  

Recap: The golden thread

In this post, we unpacked the golden thread of research, consisting of the research aims , research objectives and research questions . You can jump back to any section using the links below.

As always, feel free to leave a comment below – we always love to hear from you. Also, if you’re interested in 1-on-1 support, take a look at our private coaching service here.

You Might Also Like:

How To Review & Understand Academic Literature Quickly

Learn how to fast-track your literature review by reading with intention and clarity. Dr E and Amy Murdock explain how.

Dissertation Writing Services: Far Worse Than You Think

Thinking about using a dissertation or thesis writing service? You might want to reconsider that move. Here’s what you need to know.

Triangulation: The Ultimate Credibility Enhancer

Triangulation is one of the best ways to enhance the credibility of your research. Learn about the different options here.

The Harsh Truths Of Academic Research

Dr. Ethar Al-Saraf and Dr. Amy Murdock dive into the darker truths of academic research, so that you’re well prepared for reality.

Dissertation Paralysis: How To Get Unstuck

In this episode of the podcast, Dr. Ethar and Dr. Amy Murdock dive into how to get unstuck when you’re facing dissertation paralysis

📄 FREE TEMPLATES

Research Topic Ideation

Proposal Writing

Literature Review

Methodology & Analysis

Academic Writing

Referencing & Citing

Apps, Tools & Tricks

The Grad Coach Podcast

41 Comments

Thank you very much for your great effort put. As an Undergraduate taking Demographic Research & Methodology, I’ve been trying so hard to understand clearly what is a Research Question, Research Aim and the Objectives in a research and the relationship between them etc. But as for now I’m thankful that you’ve solved my problem.

Well appreciated. This has helped me greatly in doing my dissertation.

An so delighted with this wonderful information thank you a lot.

so impressive i have benefited a lot looking forward to learn more on research.

I am very happy to have carefully gone through this well researched article.

Infact,I used to be phobia about anything research, because of my poor understanding of the concepts.

Now,I get to know that my research question is the same as my research objective(s) rephrased in question format.

I please I would need a follow up on the subject,as I intends to join the team of researchers. Thanks once again.

Thanks so much. This was really helpful.

I know you pepole have tried to break things into more understandable and easy format. And God bless you. Keep it up

i found this document so useful towards my study in research methods. thanks so much.

This is my 2nd read topic in your course and I should commend the simplified explanations of each part. I’m beginning to understand and absorb the use of each part of a dissertation/thesis. I’ll keep on reading your free course and might be able to avail the training course! Kudos!

Thank you! Better put that my lecture and helped to easily understand the basics which I feel often get brushed over when beginning dissertation work.

This is quite helpful. I like how the Golden thread has been explained and the needed alignment.

This is quite helpful. I really appreciate!

The article made it simple for researcher students to differentiate between three concepts.

Very innovative and educational in approach to conducting research.

I am very impressed with all these terminology, as I am a fresh student for post graduate, I am highly guided and I promised to continue making consultation when the need arise. Thanks a lot.

A very helpful piece. thanks, I really appreciate it .

Very well explained, and it might be helpful to many people like me.

Wish i had found this (and other) resource(s) at the beginning of my PhD journey… not in my writing up year… 😩 Anyways… just a quick question as i’m having some issues ordering my “golden thread”…. does it matter in what order you mention them? i.e., is it always first aims, then objectives, and finally the questions? or can you first mention the research questions and then the aims and objectives?

Thank you for a very simple explanation that builds upon the concepts in a very logical manner. Just prior to this, I read the research hypothesis article, which was equally very good. This met my primary objective.

My secondary objective was to understand the difference between research questions and research hypothesis, and in which context to use which one. However, I am still not clear on this. Can you kindly please guide?

In research, a research question is a clear and specific inquiry that the researcher wants to answer, while a research hypothesis is a tentative statement or prediction about the relationship between variables or the expected outcome of the study. Research questions are broader and guide the overall study, while hypotheses are specific and testable statements used in quantitative research. Research questions identify the problem, while hypotheses provide a focus for testing in the study.

Exactly what I need in this research journey, I look forward to more of your coaching videos.

This helped a lot. Thanks so much for the effort put into explaining it.

What data source in writing dissertation/Thesis requires?

What is data source covers when writing dessertation/thesis

This is quite useful thanks

I’m excited and thankful. I got so much value which will help me progress in my thesis.

where are the locations of the reserch statement, research objective and research question in a reserach paper? Can you write an ouline that defines their places in the researh paper?

Very helpful and important tips on Aims, Objectives and Questions.

Thank you so much for making research aim, research objectives and research question so clear. This will be helpful to me as i continue with my thesis.

Thanks much for this content. I learned a lot. And I am inspired to learn more. I am still struggling with my preparation for dissertation outline/proposal. But I consistently follow contents and tutorials and the new FB of GRAD Coach. Hope to really become confident in writing my dissertation and successfully defend it.

As a researcher and lecturer, I find splitting research goals into research aims, objectives, and questions is unnecessarily bureaucratic and confusing for students. For most biomedical research projects, including ‘real research’, 1-3 research questions will suffice (numbers may differ by discipline).

Awesome! Very important resources and presented in an informative way to easily understand the golden thread. Indeed, thank you so much.

Well explained

The blog article on research aims, objectives, and questions by Grad Coach is a clear and insightful guide that aligns with my experiences in academic research. The article effectively breaks down the often complex concepts of research aims and objectives, providing a straightforward and accessible explanation. Drawing from my own research endeavors, I appreciate the practical tips offered, such as the need for specificity and clarity when formulating research questions. The article serves as a valuable resource for students and researchers, offering a concise roadmap for crafting well-defined research goals and objectives. Whether you’re a novice or an experienced researcher, this article provides practical insights that contribute to the foundational aspects of a successful research endeavor.

A great thanks for you. it is really amazing explanation. I grasp a lot and one step up to research knowledge.

I really found these tips helpful. Thank you very much Grad Coach.

I found this article helpful. Thanks for sharing this.

thank you so much, the explanation and examples are really helpful

This is a well researched and superbly written article for learners of research methods at all levels in the research topic from conceptualization to research findings and conclusions. I highly recommend this material to university graduate students. As an instructor of advanced research methods for PhD students, I have confirmed that I was giving the right guidelines for the degree they are undertaking.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Submit Comment

• Print Friendly

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Starting the research process
• Research Objectives | Definition & Examples

Research Objectives | Definition & Examples

Published on July 12, 2022 by Eoghan Ryan . Revised on November 20, 2023.

Research objectives describe what your research is trying to achieve and explain why you are pursuing it. They summarize the approach and purpose of your project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement . They should:

• Establish the scope and depth of your project
• Contribute to your research design
• Indicate how your project will contribute to existing knowledge

Table of contents

What is a research objective, why are research objectives important, how to write research aims and objectives, smart research objectives, other interesting articles, frequently asked questions about research objectives.

Research objectives describe what your research project intends to accomplish. They should guide every step of the research process , including how you collect data , build your argument , and develop your conclusions .

Your research objectives may evolve slightly as your research progresses, but they should always line up with the research carried out and the actual content of your paper.

Research aims

A distinction is often made between research objectives and research aims.

A research aim typically refers to a broad statement indicating the general purpose of your research project. It should appear at the end of your problem statement, before your research objectives.

Your research objectives are more specific than your research aim and indicate the particular focus and approach of your project. Though you will only have one research aim, you will likely have several research objectives.

Prevent plagiarism. Run a free check.

Research objectives are important because they:

• Establish the scope and depth of your project: This helps you avoid unnecessary research. It also means that your research methods and conclusions can easily be evaluated .
• Contribute to your research design: When you know what your objectives are, you have a clearer idea of what methods are most appropriate for your research.
• Indicate how your project will contribute to extant research: They allow you to display your knowledge of up-to-date research, employ or build on current research methods, and attempt to contribute to recent debates.

Once you’ve established a research problem you want to address, you need to decide how you will address it. This is where your research aim and objectives come in.

Step 1: Decide on a general aim

Your research aim should reflect your research problem and should be relatively broad.

Step 2: Decide on specific objectives

Break down your aim into a limited number of steps that will help you resolve your research problem. What specific aspects of the problem do you want to examine or understand?

Step 3: Formulate your aims and objectives

Once you’ve established your research aim and objectives, you need to explain them clearly and concisely to the reader.

You’ll lay out your aims and objectives at the end of your problem statement, which appears in your introduction. Frame them as clear declarative statements, and use appropriate verbs to accurately characterize the work that you will carry out.

The acronym “SMART” is commonly used in relation to research objectives. It states that your objectives should be:

• Specific: Make sure your objectives aren’t overly vague. Your research needs to be clearly defined in order to get useful results.
• Measurable: Know how you’ll measure whether your objectives have been achieved.
• Achievable: Your objectives may be challenging, but they should be feasible. Make sure that relevant groundwork has been done on your topic or that relevant primary or secondary sources exist. Also ensure that you have access to relevant research facilities (labs, library resources , research databases , etc.).
• Relevant: Make sure that they directly address the research problem you want to work on and that they contribute to the current state of research in your field.
• Time-based: Set clear deadlines for objectives to ensure that the project stays on track.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

Methodology

• Sampling methods
• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

Research objectives describe what you intend your research project to accomplish.

They summarize the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Your research objectives indicate how you’ll try to address your research problem and should be specific:

Once you’ve decided on your research objectives , you need to explain them in your paper, at the end of your problem statement .

Keep your research objectives clear and concise, and use appropriate verbs to accurately convey the work that you will carry out for each one.

I will compare …

A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement , before your research objectives.

Research objectives are more specific than your research aim. They indicate the specific ways you’ll address the overarching aim.

Scope of research is determined at the beginning of your research process , prior to the data collection stage. Sometimes called “scope of study,” your scope delineates what will and will not be covered in your project. It helps you focus your work and your time, ensuring that you’ll be able to achieve your goals and outcomes.

Defining a scope can be very useful in any research project, from a research proposal to a thesis or dissertation . A scope is needed for all types of research: quantitative , qualitative , and mixed methods .

To define your scope of research, consider the following:

• Budget constraints or any specifics of grant funding
• Your proposed timeline and duration
• Specifics about your population of study, your proposed sample size , and the research methodology you’ll pursue
• Any inclusion and exclusion criteria
• Any anticipated control , extraneous , or confounding variables that could bias your research if not accounted for properly.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Ryan, E. (2023, November 20). Research Objectives | Definition & Examples. Scribbr. Retrieved September 23, 2024, from https://www.scribbr.com/research-process/research-objectives/

Is this article helpful?

Eoghan Ryan

Other students also liked, writing strong research questions | criteria & examples, how to write a problem statement | guide & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Design for Business
• Most Recent
• Presentations
• Infographics
• Data Visualizations
• Forms and Surveys
• Video & Animation
• Case Studies
• Digital Marketing
• Design Inspiration
• Visual Thinking
• Product Updates
• Visme Webinars
• Artificial Intelligence

15 Real-Life Case Study Examples & Best Practices

Written by: Oghale Olori

Case studies are more than just success stories.

They are powerful tools that demonstrate the practical value of your product or service. Case studies help attract attention to your products, build trust with potential customers and ultimately drive sales.

It’s no wonder that 73% of successful content marketers utilize case studies as part of their content strategy. Plus, buyers spend 54% of their time reviewing case studies before they make a buying decision.

To ensure you’re making the most of your case studies, we’ve put together 15 real-life case study examples to inspire you. These examples span a variety of industries and formats. We’ve also included best practices, design tips and templates to inspire you.

Let’s dive in!

Table of Contents

What is a case study, 15 real-life case study examples, sales case study examples, saas case study examples, product case study examples, marketing case study examples, business case study examples, case study faqs.

• A case study is a compelling narrative that showcases how your product or service has positively impacted a real business or individual. 
• Case studies delve into your customer's challenges, how your solution addressed them and the quantifiable results they achieved.
• Your case study should have an attention-grabbing headline, great visuals and a relevant call to action. Other key elements include an introduction, problems and result section.
• Visme provides easy-to-use tools, professionally designed templates and features for creating attractive and engaging case studies.

A case study is a real-life scenario where your company helped a person or business solve their unique challenges. It provides a detailed analysis of the positive outcomes achieved as a result of implementing your solution.

Case studies are an effective way to showcase the value of your product or service to potential customers without overt selling. By sharing how your company transformed a business, you can attract customers seeking similar solutions and results.

Case studies are not only about your company's capabilities; they are primarily about the benefits customers and clients have experienced from using your product.

Every great case study is made up of key elements. They are;

• Attention-grabbing headline: Write a compelling headline that grabs attention and tells your reader what the case study is about. For example, "How a CRM System Helped a B2B Company Increase Revenue by 225%.
• Introduction/Executive Summary: Include a brief overview of your case study, including your customer’s problem, the solution they implemented and the results they achieved.
• Problem/Challenge: Case studies with solutions offer a powerful way to connect with potential customers. In this section, explain how your product or service specifically addressed your customer's challenges.
• Solution: Explain how your product or service specifically addressed your customer's challenges.
• Results/Achievements : Give a detailed account of the positive impact of your product. Quantify the benefits achieved using metrics such as increased sales, improved efficiency, reduced costs or enhanced customer satisfaction.
• Graphics/Visuals: Include professional designs, high-quality photos and videos to make your case study more engaging and visually appealing.
• Quotes/Testimonials: Incorporate written or video quotes from your clients to boost your credibility.
• Relevant CTA: Insert a call to action (CTA) that encourages the reader to take action. For example, visiting your website or contacting you for more information. Your CTA can be a link to a landing page, a contact form or your social media handle and should be related to the product or service you highlighted in your case study.

Now that you understand what a case study is, let’s look at real-life case study examples. Among these, you'll find some simple case study examples that break down complex ideas into easily understandable solutions.

In this section, we’ll explore SaaS, marketing, sales, product and business case study examples with solutions. Take note of how these companies structured their case studies and included the key elements.

We’ve also included professionally designed case study templates to inspire you.

1. Georgia Tech Athletics Increase Season Ticket Sales by 80%

Georgia Tech Athletics, with its 8,000 football season ticket holders, sought for a way to increase efficiency and customer engagement.

Their initial sales process involved making multiple outbound phone calls per day with no real targeting or guidelines. Georgia Tech believed that targeting communications will enable them to reach more people in real time.

Salesloft improved Georgia Tech’s sales process with an inbound structure. This enabled sales reps to connect with their customers on a more targeted level. The use of dynamic fields and filters when importing lists ensured prospects received the right information, while communication with existing fans became faster with automation.

As a result, Georgia Tech Athletics recorded an 80% increase in season ticket sales as relationships with season ticket holders significantly improved. Employee engagement increased as employees became more energized to connect and communicate with fans.

Why Does This Case Study Work?

In this case study example , Salesloft utilized the key elements of a good case study. Their introduction gave an overview of their customers' challenges and the results they enjoyed after using them. After which they categorized the case study into three main sections: challenge, solution and result.

Salesloft utilized a case study video to increase engagement and invoke human connection.

Incorporating videos in your case study has a lot of benefits. Wyzol’s 2023 state of video marketing report showed a direct correlation between videos and an 87% increase in sales.

The beautiful thing is that creating videos for your case study doesn’t have to be daunting.

With an easy-to-use platform like Visme, you can create top-notch testimonial videos that will connect with your audience. Within the Visme editor, you can access over 1 million stock photos , video templates, animated graphics and more. These tools and resources will significantly improve the design and engagement of your case study.

Simplify content creation and brand management for your team

• Collaborate on designs , mockups and wireframes with your non-design colleagues
• Lock down your branding to maintain brand consistency throughout your designs
• Why start from scratch? Save time with 1000s of professional branded templates

Sign up. It’s free.

2. WeightWatchers Completely Revamped their Enterprise Sales Process with HubSpot

WeightWatchers, a 60-year-old wellness company, sought a CRM solution that increased the efficiency of their sales process. With their previous system, Weightwatchers had limited automation. They would copy-paste message templates from word documents or recreate one email for a batch of customers.

This required a huge effort from sales reps, account managers and leadership, as they were unable to track leads or pull customized reports for planning and growth.

WeightWatchers transformed their B2B sales strategy by leveraging HubSpot's robust marketing and sales workflows. They utilized HubSpot’s deal pipeline and automation features to streamline lead qualification. And the customized dashboard gave leadership valuable insights.

As a result, WeightWatchers generated seven figures in annual contract value and boosted recurring revenue. Hubspot’s impact resulted in 100% adoption across all sales, marketing, client success and operations teams.

Hubspot structured its case study into separate sections, demonstrating the specific benefits of their products to various aspects of the customer's business. Additionally, they integrated direct customer quotes in each section to boost credibility, resulting in a more compelling case study.

Getting insight from your customer about their challenges is one thing. But writing about their process and achievements in a concise and relatable way is another. If you find yourself constantly experiencing writer’s block, Visme’s AI writer is perfect for you.

Visme created this AI text generator tool to take your ideas and transform them into a great draft. So whether you need help writing your first draft or editing your final case study, Visme is ready for you.

3. Immi’s Ram Fam Helps to Drive Over $200k in Sales

Immi embarked on a mission to recreate healthier ramen recipes that were nutritious and delicious. After 2 years of tireless trials, Immi finally found the perfect ramen recipe. However, they envisioned a community of passionate ramen enthusiasts to fuel their business growth.

This vision propelled them to partner with Shopify Collabs. Shopify Collabs successfully cultivated and managed Immi’s Ramen community of ambassadors and creators.

As a result of their partnership, Immi’s community grew to more than 400 dedicated members, generating over $200,000 in total affiliate sales.

The power of data-driven headlines cannot be overemphasized. Chili Piper strategically incorporates quantifiable results in their headlines. This instantly sparks curiosity and interest in readers.

While not every customer success story may boast headline-grabbing figures, quantifying achievements in percentages is still effective. For example, you can highlight a 50% revenue increase with the implementation of your product.

Take a look at the beautiful case study template below. Just like in the example above, the figures in the headline instantly grab attention and entice your reader to click through.

Having a case study document is a key factor in boosting engagement. This makes it easy to promote your case study in multiple ways. With Visme, you can easily publish, download and share your case study with your customers in a variety of formats, including PDF, PPTX, JPG and more!

4. How WOW! is Saving Nearly 79% in Time and Cost With Visme

This case study discusses how Visme helped WOW! save time and money by providing user-friendly tools to create interactive and quality training materials for their employees. Find out what your team can do with Visme. Request a Demo

WOW!'s learning and development team creates high-quality training materials for new and existing employees. Previous tools and platforms they used had plain templates, little to no interactivity features, and limited flexibility—that is, until they discovered Visme.

Now, the learning and development team at WOW! use Visme to create engaging infographics, training videos, slide decks and other training materials.

This has directly reduced the company's turnover rate, saving them money spent on recruiting and training new employees. It has also saved them a significant amount of time, which they can now allocate to other important tasks.

Visme's customer testimonials spark an emotional connection with the reader, leaving a profound impact. Upon reading this case study, prospective customers will be blown away by the remarkable efficiency achieved by Visme's clients after switching from PowerPoint.

Visme’s interactivity feature was a game changer for WOW! and one of the primary reasons they chose Visme.

“Previously we were using PowerPoint, which is fine, but the interactivity you can get with Visme is so much more robust that we’ve all steered away from PowerPoint.” - Kendra, L&D team, Wow!

Visme’s interactive feature allowed them to animate their infographics, include clickable links on their PowerPoint designs and even embed polls and quizzes their employees could interact with.

By embedding the slide decks, infographics and other training materials WOW! created with Visme, potential customers get a taste of what they can create with the tool. This is much more effective than describing the features of Visme because it allows potential customers to see the tool in action.

To top it all off, this case study utilized relevant data and figures. For example, one part of the case study said, “In Visme, where Kendra’s team has access to hundreds of templates, a brand kit, and millions of design assets at their disposal, their team can create presentations in 80% less time.”

Who wouldn't want that?

Including relevant figures and graphics in your case study is a sure way to convince your potential customers why you’re a great fit for their brand. The case study template below is a great example of integrating relevant figures and data.

This colorful template begins with a captivating headline. But that is not the best part; this template extensively showcases the results their customer had using relevant figures.

The arrangement of the results makes it fun and attractive. Instead of just putting figures in a plain table, you can find interesting shapes in your Visme editor to take your case study to the next level.

5. Lyte Reduces Customer Churn To Just 3% With Hubspot CRM

While Lyte was redefining the ticketing industry, it had no definite CRM system . Lyte utilized 12–15 different SaaS solutions across various departments, which led to a lack of alignment between teams, duplication of work and overlapping tasks.

Customer data was spread across these platforms, making it difficult to effectively track their customer journey. As a result, their churn rate increased along with customer dissatisfaction.

Through Fuelius , Lyte founded and implemented Hubspot CRM. Lyte's productivity skyrocketed after incorporating Hubspot's all-in-one CRM tool. With improved efficiency, better teamwork and stronger client relationships, sales figures soared.

The case study title page and executive summary act as compelling entry points for both existing and potential customers. This overview provides a clear understanding of the case study and also strategically incorporates key details like the client's industry, location and relevant background information.

Having a good summary of your case study can prompt your readers to engage further. You can achieve this with a simple but effective case study one-pager that highlights your customer’s problems, process and achievements, just like this case study did in the beginning.

Moreover, you can easily distribute your case study one-pager and use it as a lead magnet to draw prospective customers to your company.

Take a look at this case study one-pager template below.

This template includes key aspects of your case study, such as the introduction, key findings, conclusion and more, without overcrowding the page. The use of multiple shades of blue gives it a clean and dynamic layout.

Our favorite part of this template is where the age group is visualized.

With Visme’s data visualization tool , you can present your data in tables, graphs, progress bars, maps and so much more. All you need to do is choose your preferred data visualization widget, input or import your data and click enter!

6. How Workato Converts 75% of Their Qualified Leads

Workato wanted to improve their inbound leads and increase their conversion rate, which ranged from 40-55%.

At first, Workato searched for a simple scheduling tool. They soon discovered that they needed a tool that provided advanced routing capabilities based on zip code and other criteria. Luckily, they found and implemented Chili Piper.

As a result of implementing Chili Piper, Workato achieved a remarkable 75–80% conversion rate and improved show rates. This led to a substantial revenue boost, with a 10-15% increase in revenue attributed to Chili Piper's impact on lead conversion.

This case study example utilizes the power of video testimonials to drive the impact of their product.

Chili Piper incorporates screenshots and clips of their tool in use. This is a great strategy because it helps your viewers become familiar with how your product works, making onboarding new customers much easier.

In this case study example, we see the importance of efficient Workflow Management Systems (WMS). Without a WMS, you manually assign tasks to your team members and engage in multiple emails for regular updates on progress.

However, when crafting and designing your case study, you should prioritize having a good WMS.

Visme has an outstanding Workflow Management System feature that keeps you on top of all your projects and designs. This feature makes it much easier to assign roles, ensure accuracy across documents, and track progress and deadlines.

Visme’s WMS feature allows you to limit access to your entire document by assigning specific slides or pages to individual members of your team. At the end of the day, your team members are not overwhelmed or distracted by the whole document but can focus on their tasks.

7. Rush Order Helps Vogmask Scale-Up During a Pandemic

Vomask's reliance on third-party fulfillment companies became a challenge as demand for their masks grew. Seeking a reliable fulfillment partner, they found Rush Order and entrusted them with their entire inventory.

Vomask's partnership with Rush Order proved to be a lifesaver during the COVID-19 pandemic. Rush Order's agility, efficiency and commitment to customer satisfaction helped Vogmask navigate the unprecedented demand and maintain its reputation for quality and service.

Rush Order’s comprehensive support enabled Vogmask to scale up its order processing by a staggering 900% while maintaining a remarkable customer satisfaction rate of 92%.

Rush Order chose one event where their impact mattered the most to their customer and shared that story.

While pandemics don't happen every day, you can look through your customer’s journey and highlight a specific time or scenario where your product or service saved their business.

The story of Vogmask and Rush Order is compelling, but it simply is not enough. The case study format and design attract readers' attention and make them want to know more. Rush Order uses consistent colors throughout the case study, starting with the logo, bold square blocks, pictures, and even headers.

Take a look at this product case study template below.

Just like our example, this case study template utilizes bold colors and large squares to attract and maintain the reader’s attention. It provides enough room for you to write about your customers' backgrounds/introductions, challenges, goals and results.

The right combination of shapes and colors adds a level of professionalism to this case study template.

8. AMR Hair & Beauty leverages B2B functionality to boost sales by 200%

With limits on website customization, slow page loading and multiple website crashes during peak events, it wasn't long before AMR Hair & Beauty began looking for a new e-commerce solution.

Their existing platform lacked effective search and filtering options, a seamless checkout process and the data analytics capabilities needed for informed decision-making. This led to a significant number of abandoned carts.

Upon switching to Shopify Plus, AMR immediately saw improvements in page loading speed and average session duration. They added better search and filtering options for their wholesale customers and customized their checkout process.

Due to this, AMR witnessed a 200% increase in sales and a 77% rise in B2B average order value. AMR Hair & Beauty is now poised for further expansion and growth.

This case study example showcases the power of a concise and impactful narrative.

To make their case analysis more effective, Shopify focused on the most relevant aspects of the customer's journey. While there may have been other challenges the customer faced, they only included those that directly related to their solutions.

Take a look at this case study template below. It is perfect if you want to create a concise but effective case study. Without including unnecessary details, you can outline the challenges, solutions and results your customers experienced from using your product.

Don’t forget to include a strong CTA within your case study. By incorporating a link, sidebar pop-up or an exit pop-up into your case study, you can prompt your readers and prospective clients to connect with you.

9. How a Marketing Agency Uses Visme to Create Engaging Content With Infographics

SmartBox Dental , a marketing agency specializing in dental practices, sought ways to make dental advice more interesting and easier to read. However, they lacked the design skills to do so effectively.

Visme's wide range of templates and features made it easy for the team to create high-quality content quickly and efficiently. SmartBox Dental enjoyed creating infographics in as little as 10-15 minutes, compared to one hour before Visme was implemented.

By leveraging Visme, SmartBox Dental successfully transformed dental content into a more enjoyable and informative experience for their clients' patients. Therefore enhancing its reputation as a marketing partner that goes the extra mile to deliver value to its clients.

Visme creatively incorporates testimonials In this case study example.

By showcasing infographics and designs created by their clients, they leverage the power of social proof in a visually compelling way. This way, potential customers gain immediate insight into the creative possibilities Visme offers as a design tool.

This example effectively showcases a product's versatility and impact, and we can learn a lot about writing a case study from it. Instead of focusing on one tool or feature per customer, Visme took a more comprehensive approach.

Within each section of their case study, Visme explained how a particular tool or feature played a key role in solving the customer's challenges.

For example, this case study highlighted Visme’s collaboration tool . With Visme’s tool, the SmartBox Dental content team fostered teamwork, accountability and effective supervision.

Visme also achieved a versatile case study by including relevant quotes to showcase each tool or feature. Take a look at some examples;

Visme’s collaboration tool: “We really like the collaboration tool. Being able to see what a co-worker is working on and borrow their ideas or collaborate on a project to make sure we get the best end result really helps us out.”

Visme’s library of stock photos and animated characters: “I really love the images and the look those give to an infographic. I also really like the animated little guys and the animated pictures. That’s added a lot of fun to our designs.”

Visme’s interactivity feature: “You can add URLs and phone number links directly into the infographic so they can just click and call or go to another page on the website and I really like adding those hyperlinks in.”

You can ask your customers to talk about the different products or features that helped them achieve their business success and draw quotes from each one.

10. Jasper Grows Blog Organic Sessions 810% and Blog-Attributed User Signups 400X

Jasper, an AI writing tool, lacked a scalable content strategy to drive organic traffic and user growth. They needed help creating content that converted visitors into users. Especially when a looming domain migration threatened organic traffic.

To address these challenges, Jasper partnered with Omniscient Digital. Their goal was to turn their content into a growth channel and drive organic growth. Omniscient Digital developed a full content strategy for Jasper AI, which included a content audit, competitive analysis, and keyword discovery.

Through their collaboration, Jasper’s organic blog sessions increased by 810%, despite the domain migration. They also witnessed a 400X increase in blog-attributed signups. And more importantly, the content program contributed to over $4 million in annual recurring revenue.

The combination of storytelling and video testimonials within the case study example makes this a real winner. But there’s a twist to it. Omniscient segmented the video testimonials and placed them in different sections of the case study.

Video marketing , especially in case studies, works wonders. Research shows us that 42% of people prefer video testimonials because they show real customers with real success stories. So if you haven't thought of it before, incorporate video testimonials into your case study.

Take a look at this stunning video testimonial template. With its simple design, you can input the picture, name and quote of your customer within your case study in a fun and engaging way.

Try it yourself! Customize this template with your customer’s testimonial and add it to your case study!

11. How Meliá Became One of the Most Influential Hotel Chains on Social Media

Meliá Hotels needed help managing their growing social media customer service needs. Despite having over 500 social accounts, they lacked a unified response protocol and detailed reporting. This largely hindered efficiency and brand consistency.

Meliá partnered with Hootsuite to build an in-house social customer care team. Implementing Hootsuite's tools enabled Meliá to decrease response times from 24 hours to 12.4 hours while also leveraging smart automation.

In addition to that, Meliá resolved over 133,000 conversations, booking 330 inquiries per week through Hootsuite Inbox. They significantly improved brand consistency, response time and customer satisfaction.

The need for a good case study design cannot be over-emphasized.

As soon as anyone lands on this case study example, they are mesmerized by a beautiful case study design. This alone raises the interest of readers and keeps them engaged till the end.

If you’re currently saying to yourself, “ I can write great case studies, but I don’t have the time or skill to turn it into a beautiful document.” Say no more.

Visme’s amazing AI document generator can take your text and transform it into a stunning and professional document in minutes! Not only do you save time, but you also get inspired by the design.

With Visme’s document generator, you can create PDFs, case study presentations , infographics and more!

Take a look at this case study template below. Just like our case study example, it captures readers' attention with its beautiful design. Its dynamic blend of colors and fonts helps to segment each element of the case study beautifully.

12. Tea’s Me Cafe: Tamika Catchings is Brewing Glory

Tamika's journey began when she purchased Tea's Me Cafe in 2017, saving it from closure. She recognized the potential of the cafe as a community hub and hosted regular events centered on social issues and youth empowerment.

One of Tamika’s business goals was to automate her business. She sought to streamline business processes across various aspects of her business. One of the ways she achieves this goal is through Constant Contact.

Constant Contact became an integral part of Tamika's marketing strategy. They provided an automated and centralized platform for managing email newsletters, event registrations, social media scheduling and more.

This allowed Tamika and her team to collaborate efficiently and focus on engaging with their audience. They effectively utilized features like WooCommerce integration, text-to-join and the survey builder to grow their email list, segment their audience and gather valuable feedback.

The case study example utilizes the power of storytelling to form a connection with readers. Constant Contact takes a humble approach in this case study. They spotlight their customers' efforts as the reason for their achievements and growth, establishing trust and credibility.

This case study is also visually appealing, filled with high-quality photos of their customer. While this is a great way to foster originality, it can prove challenging if your customer sends you blurry or low-quality photos.

If you find yourself in that dilemma, you can use Visme’s AI image edit tool to touch up your photos. With Visme’s AI tool, you can remove unwanted backgrounds, erase unwanted objects, unblur low-quality pictures and upscale any photo without losing the quality.

Constant Contact offers its readers various formats to engage with their case study. Including an audio podcast and PDF.

In its PDF version, Constant Contact utilized its brand colors to create a stunning case study design.  With this, they increase brand awareness and, in turn, brand recognition with anyone who comes across their case study.

With Visme’s brand wizard tool , you can seamlessly incorporate your brand assets into any design or document you create. By inputting your URL, Visme’s AI integration will take note of your brand colors, brand fonts and more and create branded templates for you automatically.

You don't need to worry about spending hours customizing templates to fit your brand anymore. You can focus on writing amazing case studies that promote your company.

13. How Breakwater Kitchens Achieved a 7% Growth in Sales With Thryv

Breakwater Kitchens struggled with managing their business operations efficiently. They spent a lot of time on manual tasks, such as scheduling appointments and managing client communication. This made it difficult for them to grow their business and provide the best possible service to their customers.

David, the owner, discovered Thryv. With Thryv, Breakwater Kitchens was able to automate many of their manual tasks. Additionally, Thryv integrated social media management. This enabled Breakwater Kitchens to deliver a consistent brand message, captivate its audience and foster online growth.

As a result, Breakwater Kitchens achieved increased efficiency, reduced missed appointments and a 7% growth in sales.

This case study example uses a concise format and strong verbs, which make it easy for readers to absorb the information.

At the top of the case study, Thryv immediately builds trust by presenting their customer's complete profile, including their name, company details and website. This allows potential customers to verify the case study's legitimacy, making them more likely to believe in Thryv's services.

However, manually copying and pasting customer information across multiple pages of your case study can be time-consuming.

To save time and effort, you can utilize Visme's dynamic field feature . Dynamic fields automatically insert reusable information into your designs.  So you don’t have to type it out multiple times.

14. Zoom’s Creative Team Saves Over 4,000 Hours With Brandfolder

Zoom experienced rapid growth with the advent of remote work and the rise of the COVID-19 pandemic. Such growth called for agility and resilience to scale through.

At the time, Zoom’s assets were disorganized which made retrieving brand information a burden. Zoom’s creative manager spent no less than 10 hours per week finding and retrieving brand assets for internal teams.

Zoom needed a more sustainable approach to organizing and retrieving brand information and came across Brandfolder. Brandfolder simplified and accelerated Zoom’s email localization and webpage development. It also enhanced the creation and storage of Zoom virtual backgrounds.

With Brandfolder, Zoom now saves 4,000+ hours every year. The company also centralized its assets in Brandfolder, which allowed 6,800+ employees and 20-30 vendors to quickly access them.

Brandfolder infused its case study with compelling data and backed it up with verifiable sources. This data-driven approach boosts credibility and increases the impact of their story.

Bradfolder's case study goes the extra mile by providing a downloadable PDF version, making it convenient for readers to access the information on their own time. Their dedication to crafting stunning visuals is evident in every aspect of the project.

From the vibrant colors to the seamless navigation, everything has been meticulously designed to leave a lasting impression on the viewer. And with clickable links that make exploring the content a breeze, the user experience is guaranteed to be nothing short of exceptional.

The thing is, your case study presentation won’t always sit on your website. There are instances where you may need to do a case study presentation for clients, partners or potential investors.

Visme has a rich library of templates you can tap into. But if you’re racing against the clock, Visme’s AI presentation maker is your best ally.

15. How Cents of Style Made $1.7M+ in Affiliate Sales with LeadDyno

Cents of Style had a successful affiliate and influencer marketing strategy. However, their existing affiliate marketing platform was not intuitive, customizable or transparent enough to meet the needs of their influencers.

Cents of Styles needed an easy-to-use affiliate marketing platform that gave them more freedom to customize their program and implement a multi-tier commission program.

After exploring their options, Cents of Style decided on LeadDyno.

LeadDyno provided more flexibility, allowing them to customize commission rates and implement their multi-tier commission structure, switching from monthly to weekly payouts.

Also, integrations with PayPal made payments smoother And features like newsletters and leaderboards added to the platform's success by keeping things transparent and engaging.

As a result, Cents of Style witnessed an impressive $1.7 million in revenue from affiliate sales with a substantial increase in web sales by 80%.

LeadDyno strategically placed a compelling CTA in the middle of their case study layout, maximizing its impact. At this point, readers are already invested in the customer's story and may be considering implementing similar strategies.

A well-placed CTA offers them a direct path to learn more and take action.

LeadDyno also utilized the power of quotes to strengthen their case study. They didn't just embed these quotes seamlessly into the text; instead, they emphasized each one with distinct blocks.

Are you looking for an easier and quicker solution to create a case study and other business documents? Try Visme's AI designer ! This powerful tool allows you to generate complete documents, such as case studies, reports, whitepapers and more, just by providing text prompts. Simply explain your requirements to the tool, and it will produce the document for you, complete with text, images, design assets and more.

Still have more questions about case studies? Let's look at some frequently asked questions.

How to Write a Case Study?

• Choose a compelling story: Not all case studies are created equal. Pick one that is relevant to your target audience and demonstrates the specific benefits of your product or service.
• Outline your case study: Create a case study outline and highlight how you will structure your case study to include the introduction, problem, solution and achievements of your customer.
• Choose a case study template: After you outline your case study, choose a case study template . Visme has stunning templates that can inspire your case study design.
• Craft a compelling headline: Include figures or percentages that draw attention to your case study.
• Work on the first draft: Your case study should be easy to read and understand. Use clear and concise language and avoid jargon.
• Include high-quality visual aids: Visuals can help to make your case study more engaging and easier to read. Consider adding high-quality photos, screenshots or videos.
• Include a relevant CTA: Tell prospective customers how to reach you for questions or sign-ups.

What Are the Stages of a Case Study?

The stages of a case study are;

• Planning & Preparation: Highlight your goals for writing the case study. Plan the case study format, length and audience you wish to target.
• Interview the Client: Reach out to the company you want to showcase and ask relevant questions about their journey and achievements.
• Revision & Editing: Review your case study and ask for feedback. Include relevant quotes and CTAs to your case study.
• Publication & Distribution: Publish and share your case study on your website, social media channels and email list!
• Marketing & Repurposing: Turn your case study into a podcast, PDF, case study presentation and more. Share these materials with your sales and marketing team.

What Are the Advantages and Disadvantages of a Case Study?

Advantages of a case study:

• Case studies showcase a specific solution and outcome for specific customer challenges.
• It attracts potential customers with similar challenges.
• It builds trust and credibility with potential customers.
• It provides an in-depth analysis of your company’s problem-solving process.

Disadvantages of a case study:

• Limited applicability. Case studies are tailored to specific cases and may not apply to other businesses.
• It relies heavily on customer cooperation and willingness to share information.
• It stands a risk of becoming outdated as industries and customer needs evolve.

What Are the Types of Case Studies?

There are 7 main types of case studies. They include;

• Illustrative case study.
• Instrumental case study.
• Intrinsic case study.
• Descriptive case study.
• Explanatory case study.
• Exploratory case study.
• Collective case study.

How Long Should a Case Study Be?

The ideal length of your case study is between 500 - 1500 words or 1-3 pages. Certain factors like your target audience, goal or the amount of detail you want to share may influence the length of your case study. This infographic has powerful tips for designing winning case studies

What Is the Difference Between a Case Study and an Example?

Case studies provide a detailed narrative of how your product or service was used to solve a problem. Examples are general illustrations and are not necessarily real-life scenarios.

Case studies are often used for marketing purposes, attracting potential customers and building trust. Examples, on the other hand, are primarily used to simplify or clarify complex concepts.

Where Can I Find Case Study Examples?

You can easily find many case study examples online and in industry publications. Many companies, including Visme, share case studies on their websites to showcase how their products or services have helped clients achieve success. You can also search online libraries and professional organizations for case studies related to your specific industry or field.

If you need professionally-designed, customizable case study templates to create your own, Visme's template library is one of the best places to look. These templates include all the essential sections of a case study and high-quality content to help you create case studies that position your business as an industry leader.

Get More Out Of Your Case Studies With Visme

Case studies are an essential tool for converting potential customers into paying customers. By following the tips in this article, you can create compelling case studies that will help you build trust, establish credibility and drive sales.

Visme can help you create stunning case studies and other relevant marketing materials. With our easy-to-use platform, interactive features and analytics tools , you can increase your content creation game in no time.

There is no limit to what you can achieve with Visme. Connect with Sales to discover how Visme can boost your business goals.

Easily create beautiful case studies and more with Visme

Trusted by leading brands

Recommended content for you:

Create Stunning Content!

Design visual brand experiences for your business whether you are a seasoned designer or a total novice.

About the Author

Our systems are now restored following recent technical disruption, and we’re working hard to catch up on publishing. We apologise for the inconvenience caused. Find out more: https://www.cambridge.org/universitypress/about-us/news-and-blogs/cambridge-university-press-publishing-update-following-technical-disruption

We use cookies to distinguish you from other users and to provide you with a better experience on our websites. Close this message to accept cookies or find out how to manage your cookie settings .

Login Alert

• > Journals
• > American Political Science Review
• > Volume 98 Issue 2
• > What Is a Case Study and What Is It Good for?

Article contents

What is a case study and what is it good for.

Published online by Cambridge University Press:  21 June 2004

This paper aims to clarify the meaning, and explain the utility, of the case study method, a method often practiced but little understood. A “case study,” I argue, is best defined as an intensive study of a single unit with an aim to generalize across a larger set of units. Case studies rely on the same sort of covariational evidence utilized in non-case study research. Thus, the case study method is correctly understood as a particular way of defining cases, not a way of analyzing cases or a way of modeling causal relations. I show that this understanding of the subject illuminates some of the persistent ambiguities of case study work, ambiguities that are, to some extent, intrinsic to the enterprise. The travails of the case study within the discipline of political science are also rooted in an insufficient appreciation of the methodological tradeoffs that this method calls forth. This paper presents the familiar contrast between case study and non-case study work as a series of characteristic strengths and weaknesses— affinities —rather than as antagonistic approaches to the empirical world. In the end, the perceived hostility between case study and non-case study research is largely unjustified and, perhaps, deserves to be regarded as a misconception. Indeed, the strongest conclusion to arise from this methodological examination concerns the complementarity of single-unit and cross-unit research designs.

Access options

This article has been cited by the following publications. This list is generated based on data provided by Crossref .

• Google Scholar

View all Google Scholar citations for this article.

Save article to Kindle

To save this article to your Kindle, first ensure [email protected] is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle .

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

• Volume 98, Issue 2
• JOHN GERRING (a1)
• DOI: https://doi.org/10.1017/S0003055404001182

Save article to Dropbox

To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox .

Save article to Google Drive

To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive .

Reply to: Submit a response

- No HTML tags allowed - Web page URLs will display as text only - Lines and paragraphs break automatically - Attachments, images or tables are not permitted

Your details

Your email address will be used in order to notify you when your comment has been reviewed by the moderator and in case the author(s) of the article or the moderator need to contact you directly.

You have entered the maximum number of contributors

Conflicting interests.

Please list any fees and grants from, employment by, consultancy for, shared ownership in or any close relationship with, at any time over the preceding 36 months, any organisation whose interests may be affected by the publication of the response. Please also list any non-financial associations or interests (personal, professional, political, institutional, religious or other) that a reasonable reader would want to know about in relation to the submitted work. This pertains to all the authors of the piece, their spouses or partners.

The theory contribution of case study research designs

• Original Research
• Open access
• Published: 16 February 2017
• Volume 10 , pages 281–305, ( 2017 )

Cite this article

You have full access to this open access article

• Hans-Gerd Ridder 1  

173k Accesses

330 Citations

11 Altmetric

Explore all metrics

The objective of this paper is to highlight similarities and differences across various case study designs and to analyze their respective contributions to theory. Although different designs reveal some common underlying characteristics, a comparison of such case study research designs demonstrates that case study research incorporates different scientific goals and collection and analysis of data. This paper relates this comparison to a more general debate of how different research designs contribute to a theory continuum. The fine-grained analysis demonstrates that case study designs fit differently to the pathway of the theory continuum. The resulting contribution is a portfolio of case study research designs. This portfolio demonstrates the heterogeneous contributions of case study designs. Based on this portfolio, theoretical contributions of case study designs can be better evaluated in terms of understanding, theory-building, theory development, and theory testing.

Similar content being viewed by others

Case Study Research

Explore related subjects

• Artificial Intelligence

Avoid common mistakes on your manuscript.

1 Introduction

Case study research scientifically investigates into a real-life phenomenon in-depth and within its environmental context. Such a case can be an individual, a group, an organization, an event, a problem, or an anomaly (Burawoy 2009 ; Stake 2005 ; Yin 2014 ). Unlike in experiments, the contextual conditions are not delineated and/or controlled, but part of the investigation. Typical for case study research is non-random sampling; there is no sample that represents a larger population. Contrary to quantitative logic, the case is chosen, because the case is of interest (Stake 2005 ), or it is chosen for theoretical reasons (Eisenhardt and Graebner 2007 ). For within-case and across-case analyses, the emphasis in data collection is on interviews, archives, and (participant) observation (Flick 2009 : 257; Mason 2002 : 84). Case study researchers usually triangulate data as part of their data collection strategy, resulting in a detailed case description (Burns 2000 ; Dooley 2002 ; Eisenhardt 1989 ; Ridder 2016 ; Stake 2005 : 454). Potential advantages of a single case study are seen in the detailed description and analysis to gain a better understanding of “how” and “why” things happen. In single case study research, the opportunity to open a black box arises by looking at deeper causes of the phenomenon (Fiss 2009 ). The case data can lead to the identification of patterns and relationships, creating, extending, or testing a theory (Gomm et al. 2000 ). Potential advantages of multiple case study research are seen in cross-case analysis. A systematic comparison in cross-case analysis reveals similarities and differences and how they affect findings. Each case is analyzed as a single case on its own to compare the mechanisms identified, leading to theoretical conclusions (Vaughan 1992 : 178). As a result, case study research has different objectives in terms of contributing to theory. On the one hand, case study research has its strength in creating theory by expanding constructs and relationships within distinct settings (e.g., in single case studies). On the other hand, case study research is a means of advancing theories by comparing similarities and differences among cases (e.g., in multiple case studies).

Unfortunately, such diverging objectives are often neglected in case study research. Burns ( 2000 : 459) emphasizes: “The case study has unfortunately been used as a ‘catch –all’ category for anything that does not fit into experimental, survey, or historical methods.”

Therefore, this paper compares case study research designs. Such comparisons have been conducted previously regarding their philosophical assumptions and orientations, key elements of case study research, their range of application, and the lacks of methodological procedures in publications. (Baxter and Jack 2008 ; Dooley 2002 ; Dyer and Wilkins 1991 ; Piekkari et al. 2009 ; Welch et al. 2011 ). This paper aims to compare case study research designs regarding their contributions to theory.

Case study research designs will be analyzed regarding their various strengths on a theory continuum. Edmondson and McManus ( 2007 ) initiated a debate on whether the stage of theory fits to research questions, style of data collection, and analyses. Similarly, Colquitt and Zapata-Phelan ( 2007 ) created a taxonomy capturing facets of empirical article’s theoretical contributions by distinguishing between theory-building and theory testing. Corley and Gioia ( 2011 ) extended this debate by focusing on the practicality of theory and the importance of prescience. While these papers consider the whole range of methodological approaches on a higher level, they treat case studies as relatively homogeneous. This paper aims to delve into a deeper level of analysis by solely focusing on case study research designs and their respective fit on this theory continuum. This approach offers a more fine-grained understanding that sheds light on the diversity of case study research designs in terms of their differential theory contributions. Such a deep level of analysis on case study research designs enables more rigor in theory contribution. To analyze alternative case study research designs regarding their contributions to theory, I engage into the following steps:

First, differences between case study research designs are depicted. I outline and compare the case study research designs with regard to the key elements, esp. differences in research questions, frameworks, sampling, data collection, and data analysis. These differences result in a portfolio of various case study research designs.

Second, I outline and substantiate a theory continuum that varies between theory-building, theory development, and testing theory. Based on this continuum, I analyze and discuss each of the case study research designs with regard to their location on the theory continuum. This analysis is based on a detailed differentiation of the phenomenon (inside or outside the theory), the status of the theory, research strategy, and methods.

As a result, the contribution to the literature is a portfolio of case study research designs explicating their unique contributions to theory. The contribution of this paper lies in a fine-grained analysis of the interplay of methods and theory (van Maanen et al. 2007 ) and the methodological fit (Edmondson and McManus 2007 ) of case study designs and the continuum of theory. It demonstrates that different designs have various strengths and that there is a fit between case study designs and different points on a theory continuum. If there is no clarity as to whether a case study design aims at creating, elaborating, extending, or testing theory, the contribution to theory is difficult to identify for authors, reviewers, and readers. Consequently, this paper aims to clarify at which point of the continuum of theory case study research designs can provide distinct contributions that can be identified beyond their traditionally claimed exploratory character.

2 Differences across case study design: a portfolio approach

Only few papers have compared case study research designs so far. In all of these comparisons, the number of designs differs as well as the issues under consideration. In an early debate between Dyer and Wilkins ( 1991 ) and Eisenhardt ( 1991 ), Dyer and Wilkins compared the case study research design by Eisenhardt ( 1989 ) with “classical” case studies. The core of the debate concerns a difference between in-depth single case studies (classical case study) to a focus on the comparison of multiple cases. Dyer and Wilkins ( 1991 : 614) claim that the essence of a case study lies in the careful study of a single case to identify new relationships and, as a result, question the Eisenhardt approach which puts a lot of emphasis on comparison of multiple cases. Eisenhardt, on the contrary, claims that multiple cases allow replication between cases and is, therefore, seen as a means of corroboration of propositions (Eisenhardt 1991 ). Classical case studies prefer deep descriptions of a single case, considering the context to reveal insights into the single case and by that elaborate new theories. The comparison of multiple cases, therefore, tends—in the opinion of Dyer and Wilkens—to surface descriptions. This weakens the possibility of context-related, rich descriptions. While, in classic case study, good stories are the aim, the development of good constructs and their relationships is aimed in Eisenhardt’s approach. Eisenhardt ( 1991 : 627) makes a strong plea on more methodological rigor in case study research, while Dyer and Wilkins ( 1991 : 613) criticize that the new approach “… includes many of the attributes of hypothesis-testing research (e.g., sampling and controls).”

Dooley ( 2002 : 346) briefly takes the case study research designs by Yin (1994) and Eisenhardt ( 1989 ) as exemplars of how the processes of case study research can be applied. The approach by Eisenhardt is seen as an exemplar that advances conceptualization and operationalization in the phases of theory-building, while the approach by Yin is seen as exemplar that advances minimally conceptualized and operationalized existing theory.

Baxter and Jack ( 2008 ) describe the designs by Yin (2003) and Stake ( 1995 ) to demonstrate key elements of qualitative case study. The authors outline and carefully compare the approaches by Yin and Stake in conducting the research process, neglecting philosophical differences and theoretical goals.

Piekkari et al. ( 2009 ) outline the methodological richness of case study research using the approaches of Yin et al. (1998), and Stake. They specifically exhibit the role of philosophical assumptions, establishing differences in conventionally accepted practices of case study research in published papers. The authors analyze 135 published case studies in four international business journals. The analysis reveals that, in contrast to the richness of case study approaches, the majority of published case studies draw on positivistic foundations and are narrowly declared as explorative with a lack of clarity of the theoretical purpose of the case study. Case studies are often designed as multiple case studies with cross-sectional designs based on interviews. In addition to the narrow use of case study research, the authors find out that “… most commonly cited methodological literature is not consistently followed” (Piekkari et al. 2009 : 567).

Welch et al. ( 2011 ) develop a typology of theorizing modes in case study methods. Based on the two dimensions “contextualization” and “causal explanation”, they differentiate in their typology between inductive theory-building (Eisenhardt), interpretive sensemaking (Stake), natural experiment (Yin), and contextualised explanation (Ragin/Bhaskar). The typology is used to analyze 199 case studies from three highly ranked journals over a 10-year period for whether the theorizing modes are exercised in the practice of publishing case studies. As a result, the authors identify a strong emphasis on the exploratory function of case studies, neglecting the richness of case study methods to challenge, refine, verify, and test theories (Welch et al. 2011 : 755). In addition, case study methods are not consistently related to theory contribution: “By scrutinising the linguistic elements of texts, we found that case researchers were not always clear and consistent in the way that they wrote up their theorising purpose and process” (Welch et al. 2011 : 756).

As a result, the comparisons reveal a range of case study designs which are rarely discussed. In contrast, published case studies are mainly introduced as exploratory design. Explanatory, interpretivist, and critical/reflexive designs are widely neglected, narrowing the possible applications of case study research. In addition, comparisons containing an analysis of published case studies reveal a low degree in accuracy when applying case study methods.

What is missing is a comparison of case study research designs with regard to differences in the contribution to theory. Case study designs have different purposes in theory contribution. Confusing these potential contributions by inconsistently utilizing the appropriate methods weakens the contribution of case studies to scientific progress and, by that, damages the reputation of case studies.

To conduct such a comparison, I consider the four case study research approaches of Yin, Eisenhardt, Burawoy, and Stake for the following reasons.

These approaches are the main representatives of case study research design outlined in the comparisons elaborated above (Baxter and Jack 2008 ; Dooley 2002 ; Dyer and Wilkins 1991 ; Piekkari et al. 2009 ; Welch et al. 2011 ). I follow especially the argument by Piekkari et al. ( 2009 ) that these approaches contain a broad spectrum of methodological foundations of exploratory, explanatory, interpretivist, and critical/reflexive designs. The chosen approaches have an explicit and detailed methodology which can be reconstructed and compared with regard to their theory contribution. Although there are variations in the application of the designs, to the best of my knowledge, the designs represent the spectrum of case study methodologies. A comparison of these methodologies revealed main distinguishable differences. To highlight these main differences, I summarized these differences into labels of “no theory first”; “gaps and holes”; “social construction of reality”; and “anomalies”.

I did not consider descriptions of case study research in text books which focus more or less on general descriptions of the common characteristics of case studies, but do not emphasize differences in methodologies and theory contribution. In addition, I did not consider so-called “home grown” designs (Eisenhardt 1989 : 534) which lack a systematic and explicit demonstration of the methodology and where “… the hermeneutic process of inference—how all these interviews, archival records, and notes were assembled into a coherent whole, what was counted and what was discounted—remains usually hidden from the reader” (Fiss 2009 : 425).

Finally, although often cited in the methodological section of case studies, books are not considered which concentrate on data analysis in qualitative research per se (Miles et al. 2014 ; Corbin and Strauss 2015 ). Therefore, to analyze the contribution of case study research to the scientific development, it needs to compare explicit methodology. This comparison will be outlined in the following sections with regard to main methodological steps: the role of the case, the collection of data, and the analysis of data.

2.1 Case study research design 1: no theory first

A popular template for building theory from case studies is a paper by Eisenhardt ( 1989 ). It follows a dramaturgy with a precise order of single steps for constructing a case study and is one of the most cited papers in methods sections (Ravenswood 2011 ). This is impressive for two reasons. On the one hand, Eisenhardt herself has provided a broader spectrum of case study research designs in her own empirical papers, for example, by combining theory-building and theory elaboration (Bingham and Eisenhardt 2011 ). On the other hand, she “updated” her design in a paper with Graebner (Eisenhardt and Graebner 2007 ), particularly by extending the range of inductive theory-building. These developments do not seem to be seriously considered by most authors, as differences and elaborations of this spectrum are rarely found in publications. Therefore, in the following, I focus on the standards provided by Eisenhardt ( 1989 ) and Eisenhardt and Graebner ( 2007 ) as exemplary guidelines.

Eisenhardt follows the ideal of ‘no theory first’ to capture the richness of observations without being limited by a theory. The research question may stem from a research gap meaning that the research question is of relevance. Tentative a priori constructs or variables guide the investigation, but no relationships between such constructs or variables are assumed so far: “Thus, investigators should formulate a research problem and possibly specify some potentially important variables, with some reference to extant literature. However, they should avoid thinking about specific relationships between variables and theories as much as possible, especially at the outset of the process” (Eisenhardt 1989 : 536).

Cases are chosen for theoretical reasons: for the likelihood that the cases offer insights into the phenomenon of interest. Theoretical sampling is deemed appropriate for illuminating and extending constructs and identifying relationships for the phenomenon under investigation (Eisenhardt and Graebner 2007 ). Cases are sampled if they provide an unusual phenomenon, replicate findings from other cases, use contrary replication, and eliminate alternative explanations.

With respect to data collection, qualitative data are the primary choice. Data collection is based on triangulation, where interviews, documents, and observations are often combined. A combination of qualitative data and quantitative data is possible as well (Eisenhardt 1989 : 538). Data analysis is conducted via the search for within-case patterns and cross-case patterns. Systematic procedures are conducted to compare the emerging constructs and relationships with the data, eventually leading to new theory.

A good exemplar for this design is the investigation of technology collaborations (Davis and Eisenhardt 2011 ). The purpose of this paper is to understand processes by which technology collaborations support innovations. Eight technology collaborations among ten firms were sampled for theoretical reasons. Qualitative and quantitative data were used from semi-structured interviews, public and private data, materials provided by informants, corporate intranets, and business publications. The data was measured, coded, and triangulated. Writing case histories was a basis for within-case and cross-case analysis. Iteration between cases and emerging theory and considering the relevant literature provided the basis for the development of a theoretical framework.

Another example is the investigation of what is learned in organizational processes (Bingham and Eisenhardt 2011 ). This paper demonstrates that the case study design is not only used for theory-building, but can also be combined with theory elaboration. Based on the lenses of the organizational knowledge literature, organizational routines literature, and heuristics literature, six technology-based ventures were chosen for theoretical reasons. Several data sources were used, especially quantitative and qualitative data from semi-structured interviews, archival data, observations, e-mails, phone calls, and follow-up interviews. Within-case analysis revealed what each firm has learned from process experience. Cross-case analysis revealed emerging patterns from which tentative constructs and propositions were formed. In replication logic constructs and propositions were refined across the cases. When mirroring the findings with the literature, both the emergences of the constructs were compared and unexpected types were considered. The iteration of theory and data as well as the consideration of related research sharpened the theoretical arguments, eventually leading to a theoretical framework. “Thus, we combined theory elaboration (Lee 1999 ) and theory generation (Eisenhardt 1989 )” (Bingham and Eisenhardt 2011 : 1448).

2.2 Case study research design 2: gaps and holes

Contrary to “No Theory First”, case study research design can also aim at specifying gaps or holes in existing theory with the ultimate goal of advancing theoretical explanations (Ridder 2016 ). A well-known template for this case study research design is the book by Yin ( 2014 ). It is a method-orientated handbook of how to design single and multiple case studies with regard to this purpose. Such a case study research design includes: “A ‘how’ and ‘why’ question” (Yin 2014 : 14). Research questions can be identified and shaped using literature to narrow the interest in a specific topic, looking for key studies and identifying questions in these studies. According to Yin’s design, existing theory is the starting point of case study research. In addition, propositions or frameworks provide direction, reflect the theoretical perspective, and guide the search for relevant evidence.

There are different rationales for choosing a single case design (Yin 2014 : 51). Purposeful sampling is conducted if an extreme case or an unusual case is chosen and if rarely observable phenomena can be investigated with regard to unknown matters and their relationships. Common cases allow conclusions for a broader class of cases. Revelatory cases provide the opportunity to investigate into a previously inaccessible inquiry, and the longitudinal study enables one to investigate a single case at several points in time. A rationale for multiple case designs has its strength in replication logic (Yin 2014 : 56). In the case of literal replication, cases are selected to predict similar results. In the case of theoretical replication, cases are selected to predict contrasting results but for theoretical reasons. Yin provides several tactics to increase the reliability (protocol; data base) of the study.

Yin ( 2014 : 103) emphasizes that interviews are one of the most important sources of data collection but considers other sources of qualitative data as well. Data triangulation is designed to narrow problems of construct validity, as multiple sources of data provide multiple measures of the same phenomenon. Yin ( 2014 : 133) offers a number of data analysis strategies (e.g., case description; examining rival explanations) and analytic techniques which are apt to compare the proposed relationships with empirical patterns. Pattern-matching logic compares empirically based patterns with predicted patterns, enabling further data analysis techniques (explanation building, time series analysis, logic models, and cross-case synthesis). In analytical generalization, the theory is compared with the empirical results, leading to the modification or extension of the theory.

An appropriate model for this case study design can be identified in a paper by Ellonen et al. ( 2009 ). The paper is based on the emerging dynamic capability theory. The four cases were chosen for theoretical reasons to deliver an empirical contribution to the dynamic capability theory by investigating the relationship of dynamic capabilities and innovation outcomes. The authors followed a literal replication strategy and identified patterns between dynamic capabilities of the firms and their innovation outcomes.

Shane ( 2000 ) is an author who developed specific propositions from a framework and examined the propositions in eight entrepreneurial cases. Using several sources of interviews and archival data, the author compared the data with the propositions using the pattern-matching logic, which concluded in developing entrepreneurship theory.

2.3 Case study research design 3: social construction of reality

So far, the outlined case study research designs are based on positivist roots, but there is richness and variety in case study research stemming from different philosophical realms. The case study research design by Stake ( 1995 , 2000 , 2005 ), for example, is based on constructivist assumptions and aims to investigate the social construction of reality and meaning (Schwandt 1994 : 125).

According to this philosophical assumption, there is no unique “real world” that preexists independently of human mental activity and symbolic language. The world is a product of socially and historically related interchanges amongst people (social construction). The access to reality is given through social constructions, such as language and shared meanings: “The meaning-making activities themselves are of central interest to social constructionists/constructivists, simply because it is the meaning-making/sense making attributional activities that shape action or (inaction)” (Guba and Lincoln 2005 : 197). Therefore, the researcher is not looking for objective “facts”, nor does he aim at identifying and measuring patterns which can be generalized. Contrarily, the constructivist is researching into specific actions, in specific places, at specific times. The scientist tries to understand the construction and the sharing of meaning (Schwandt 1994 ).

According to Stake ( 2005 ), the direction of the case study is shaped by the interest in the case. In an intrinsic case study, the case itself is of interest. The purpose is not theory-building but curiosity in the case itself. In an instrumental case study, the case itself is of secondary interest. It plays a supportive role, as it facilitates the understanding of a research issue. The case can be typical of other cases. Multiple or collective case study research designs extend the instrumental case study. It is assumed that a number of cases will increase the understanding and support theorizing by comparison of the cases.

The differentiation by Stake ( 1995 , 2005 ) into intrinsic and instrumental cases guides the purposive sampling strategy. In intrinsic case studies, the case is, by definition, already selected. The researcher looks for specific characteristics, aiming for thick descriptions with the opportunity to learn. Representativeness or generalization is not considered. In instrumental case study design, purposive sampling leads to the phenomenon under investigation. In multiple case study designs, the ability to compare cases enhances the opportunity to theorize.

A case study requires an integrated, holistic comprehension of the case complexity. According to Stake ( 2005 ), the case study is constructed by qualitative data, such as observations, interviews, and documents. Triangulation first serves as clarification of meaning. Second, the researcher is interested in the diversity of perceptions.

Two methods of data analysis are considered in such qualitative case study design: direct interpretation and categorical aggregation (Stake 1995 : 74). The primary task of an intrinsic case study is to understand the case. This interpretation is offered to the reader, but the researcher has to provide the material in a sufficient way (thick descriptions), so that the reader can learn from the case as well as draw his or her own conclusions. Readers can thus make some generalizations based on personal and vicarious experiences (“naturalistic generalization”). In instrumental case studies, the understanding of phenomena and relationships leads to categorical aggregation, and the focus is on how the phenomenon exists across several cases.

Greenwood and Suddaby ( 2006 ), for example, used the instrumental case study design by Stake, combining network location theory and dialectical theory. They identified new dynamics creating a process model of elite institutional entrepreneurship.

Ituma et al. ( 2011 ) highlighted the social construction of reality in their study of career success. The majority of career studies have been conducted in Western countries and findings have been acknowledged as universally applicable. The authors demonstrated that realities of managers in other areas are constructed differently. As a result of their study, they provided a contextually sensitive frame for the analysis of career outcomes.

2.4 Case study research design 4: anomalies

Identifying anomalies as a basis for further research is common in management and organization research (Gilbert and Christensen 2005 ). In case study research, the extended case study method is used for this case study research design (Ridder 2016 ). Following Burawoy ( 1991 , 1998 , 2009 ), the research question derives from curiosity. Researchers normally look at what is “interesting” and what is “surprising” in a social situation that existing theory cannot explain. Initially, it is not important whether the expectations develop from some popular belief, stereotype, or from an academic theory. The extended case study research design is guided by anomalies that the previous theory was not able to explain through internal contradictions of theory, theoretical gaps, or silences. An anomaly does not reject theory, but rather demonstrates that the theory is incomplete. Theory is aimed to be improved by “… turning anomalies into exemplars” (Burawoy 1991 : 10).

The theoretical sampling strategy in this case study research design stems from the theoretical failure in confrontation with the site. According to the reflexive design, such cases do not favour individuals or isolated phenomena, but social situations in which a comparative strategy allows the tracing of differences across the cases to external forces.

In the extended case study, the researcher deals with qualitative data, but also considers the broader complex social situation. The researcher engages into a dialogue with the respondents (Burawoy ( 1991 , 1998 , 2009 ). An interview is an intervention into the life of a respondent. By means of mutual interaction it is possible to discover the social order under investigation. The observer has to unpack those situational experiences by means of participant observation and mutual interpretation. This situational comprehension aims at understanding divergent “voices”, reflecting the variety of respondents’ understandings of the social situation.

As in other sciences, these voices have to be aggregated. This aggregation of multiple readings of a single case is conducted by turning the aggregation into social processes: “The move from situation to process is accomplished differently in different reflexive methods, but it is always reliant on existing theory” (Burawoy 2009 : 41). Social processes are now traced to the external field as the conditions of the social processes. Consequently, this leads to the question concerning “… how those micro situations are shaped by wider structures” (Burawoy 1991 : 282). “Reflexive science insists, therefore, on studying the everyday world from the standpoint of its structuration, that is, by regarding it as simultaneously shaped by and shaping an external field of forces” (Burawoy 2009 : 42). Such social fields cannot be held constant, which undermines the idea of replication. The external field is in continuous flux. Accordingly, social forces that influence the social processes are identified, shaping the phenomenon under investigation. Extension of theory does not target representativeness as a relationship of sample and population. Generality in reflexive science is to reconstruct an existing theory: “We begin with our favorite theory but seek not confirmations but refutations that inspire us to deepen that theory. Instead of discovering grounded theory, we elaborate existing theory. We do not worry about the uniqueness of our case, since we are not as interested in its representativeness as its contribution to reconstructing theory. Our theoretical point of departure can range from the folk theory of participants to any abstract law. We consider only that the scientist consider it worth developing” (Burawoy 2009 : 43). Such elaboration stems from the identification of anomalies and offers new predictions with regard to the theory.

It is somewhat surprising that the extended case study design has been neglected in the management literature so far, and it appears that critical reflexive principles have to be resurrected as they have been in other disciplines (see the overview at Wadham and Warren 2014 ). Examples in the management and organization literature are rare. Danneels ( 2011 ) used the extended case study design to extend the dynamic capabilities theory. In his famous Smith Corona case, Danneels shows how a company tried to change its resource base. Based on detailed data, the Smith Corona case provides insights into the resource alteration processes and how dynamic capabilities operate. As a result, the paper fills a process gap in dynamic capability theory. Iterating between data collection and analysis, Danneels revealed resource cognition as an element not considered so far in dynamic capability theory. The use of the extended case study method is limited to the iteration of data and theory. First, there is “running exchange” (Burawoy 1991 : 10) between field notes and analysis. Second, there is iteration between analysis and existing theory. Unlike Burawoy, who aims to reconstruct existing theory on the basis of “emergent anomalies” (Burawoy 1991 : 11) considering social processes and external forces, Danneels confronts the dynamic capabilities literature with the Smith Corona case to extend the theory of dynamic capabilities.

2.5 A comparison of case study research processes

Commonalities and differences emerged from the comparison of the designs. Table  1 provides a brief summary of these main differences and the resulting portfolio of case study research designs which will be discussed in more detail.

There is an extensive range between the different designs regarding the research processes. In “no theory first”, there is a broad and tentative research question with some preliminary variables at the outset. The research question may be modified during the study as well as the variables. This design avoids any propositions regarding relationships.

On the contrary, the research question in “gaps and holes” is strongly related to existing theory, focusing on “how and why” questions. The existing theory contains research gaps which, once identified within the existing theory, lead accordingly to assumed relationships which are the basis for framework and propositions to be matched by empirical data. This broad difference is even more elaborated by a design that aims the “social construction of reality”. There is no research question at the outset, but a curiosity in the case or the case is a facilitator to understand a research issue. This is far away from curiosity in the “anomaly approach”. Here, the research question is inspired by questioning why an anomaly cannot be explained by the existing theory. What kind of gaps, silences, or internal contradictions demonstrates the insufficiency of the existing theory?

Various sampling strategies are used across these case study research designs, including theoretical sampling and purposeful sampling, which serve different objectives. Theoretical sampling in “no theory first” aims at selecting a case or cases that are appropriate to highlight new or extend preliminary constructs and reveal new relationships. There is a distinct difference from theoretical sampling in the “anomalies” approach. Such a sampling strategy aims to choose a case that is a demonstration of the failure of the theory. In “gaps and holes” sampling is highly focused on the purpose of the case study. Extreme and unusual cases have other purposes compared to common cases or revelatory cases. A single case may be chosen to investigate deeply into new phenomena. A multiple case study may serve a replication logic by which the findings have relevance beyond the cases under investigation. In “social construction of reality”, the sampling is purposeful as well, but for different reasons. Either the case is of interest per se or the case represents a good opportunity to understand a theoretical issue.

Although qualitative data are preferred in all of the designs, quantitative data are seen as a possible opportunity to strengthen cases by such data. Nevertheless, in “social construction of reality”, there is a strong emphasis on thick descriptions and a holistic understanding of the case. This is in contrast to a more construct- and variable- oriented collection of data in “no theory first” and “gaps and holes”. In addition, in contrast to that, the “anomaly” approach is the only design that receives data from dialogue between observer and participants and participant observation.

Finally, data analysis lies within a wide range. In “no theory first”, the research process is finalized by inspecting the emerging constructs within the case or across cases. Based on a priory constructs, systematic comparisons reveal patterns and relationships resulting in a tentative theory. On the contrary, in “gaps and holes”, a tentative theory exists. The final analysis concentrates on the matching of the framework or propositions with patterns from the data. While both of these approaches condense data, the approach of “social construction of reality” ends the research process with thick descriptions of the case to learn from the case or with categorical comparisons. In the “anomaly” approach, the data analysis is aggregation of data, but these aggregated data are related to its external field and their pressures and influences by structuration to reconstruct the theory.

As a result, it is unlikely that the specified case study designs contribute to theory in a homogeneous manner. This result will be discussed in light of the question regarding how these case study designs can inform theory at several points of a continuum of theory. This analysis will be outlined in the following sections. In a first step, I review the main elements of a theory continuum. In a second step, I discuss the respective contribution of the previously identified case study research designs to the theory continuum.

3 Elements of a theory continuum

What a theory is and what a theory is not is a classic debate (Sutton and Staw 1995 ; Weick 1995 ). Often, theories are described in terms of understanding relationships between phenomena which have not been or were not well understood before (Chiles 2003 ; Edmondson and McManus 2007 ; Shah and Corley 2006 ), but there is no overall acceptance as to what constitutes a theory. Theory can be seen as a final product or as a continuum, and there is an ongoing effort to define different stages of this continuum (Andersen and Kragh 2010 ; Colquitt and Zapata-Phelan 2007 ; Edmondson and McManus 2007 ; Snow 2004 ; Swedberg 2012 ). In the following section, basic elements of the theory and the construction of the theory continuum are outlined.

3.1 Basic elements of a theory

Most of the debate concerning what a theory is comprises three basic elements (Alvesson and Kärreman 2007 ; Bacharach 1989 ; Dubin 1978 ; Kaplan 1998 ; Suddaby 2010 ; Weick 1989 , 1995 ; Whetten 1989 ). A theory comprises components (concepts and constructs), used to identify the necessary elements of the phenomenon under investigation. The second is relationships between components (concepts and constructs), explaining the how and whys underlying the relationship. Third, temporal and contextual boundaries limit the generalizability of the theory. As a result, definitions of theory emphasize these components, relationships, and boundaries:

“It is a collection of assertions, both verbal and symbolic, that identifies what variables are important for what reasons, specifies how they are interrelated and why, and identifies the conditions under which they should be related or not related” (Campbell 1990 : 65).

“… a system of constructs and variables in which the constructs are related to each other by propositions and the variables are related to each other by hypotheses” (Bacharach 1989 : 498).

“Theory is about the connections among phenomena, a story about why acts, events, structure, and thoughts occur. Theory emphasizes the nature of causal relationships, identifying what comes first as well as the timing of such events” (Sutton and Staw 1995 : 378).

“… theory is a statement of concepts and their interrelationships that shows how and/or why a phenomenon occurs” (Corley and Gioia 2011 : 12).

The terms “constructs” and “concepts” are either used interchangeably or with different meanings. Positivists use “constructs” as a lens for the observation of a phenomenon (Suddaby 2010 ). Such constructs have to be operationalized and measured. Non-positivists often use the term “concept” as a more value neutral term in place of the term construct (Gioia et al. 2013 ; Suddaby 2010 : 354). Non-positivists aim at developing concepts on the basis of data that contain richness and complexity of the observed phenomenon instead of narrow definitions and operationalizations of constructs. Gioia et al. ( 2013 : 16) clarify the demarcation line between constructs and concepts as follows: “By ‘concept,’ we mean a more general, less well-specified notion capturing qualities that describe or explain a phenomenon of theoretical interest. Put simply, in our way of thinking, concepts are precursors to constructs in making sense of organizational worlds—whether as practitioners living in those worlds, researchers trying to investigate them, or theorists working to model them”.

In sum, theories are a systematic combination of components and their relationships within boundaries. The use of the terms constructs and concepts is related to different philosophical assumptions reflected in different types of case study designs.

3.2 Theory continuum

Weick ( 1995 ) makes an important point that theory is more a continuum than a product. In his view, theorizing is a process containing assumptions, accepted principles, and rules of procedures to explain or predict the behavior of a specified set of phenomena. In similar vein, Gilbert and Christensen ( 2005 ) demonstrate the process character of theory. In their view, a first step of theory building is a careful description of the phenomena. Having already observed and described the phenomena, researchers then classify the phenomena into similar categories. In this phase a framework defines categories and relationships amongst phenomena. In the third phase, researchers build theories to understand (causal) relationships, and in this phase, a model or theory asserts what factors drive the phenomena and under what circumstances. The categorization scheme enables the researchers to predict what they will observe. The “test” offers a confirmation under which circumstances the theory is useful. The early drafts of a theory may be vague in terms of the number and adequateness of factors and their relationships. At the end of the continuum, there may be more precise variables and predicted relationships. These theories have to be extended by boundaries considering time and space.

Across that continuum, different research strategies have various strengths. Several classifications in the literature intend to match research strategies to the different phases of a theory continuum (Andersen and Kragh 2010 ; Colquitt and Zapata-Phelan 2007 ; Edmondson and McManus 2007 ; Snow 2004 ; Swedberg 2012 ). These classifications, although there are differences in terms, comprise three phases with distinguishable characteristics.

3.2.1 Building theory

Here, the careful description of the phenomena is the starting point of theorizing. For example, Snow ( 2004 ) puts this phase as theory discovery, where analytic understandings are generated by means of detailed examination of data. Edmondson and McManus ( 2007 ) state the starting phase of a theory as nascent theory providing answers to new questions revealing new connections among phenomena. Therefore, research questions are open and researchers avoid hypotheses predicting relationships between variables. Swedberg ( 2012 ) highlights the necessity of observation and extensive involvement with the phenomenon at the early stage of theory-building. It is an attempt to understand something of interest by observing and interpreting social facts. Creativity and inspiration are necessary conditions to put observations into concepts and outline a tentative theory.

3.2.2 Developing theory

This tentative theory exists in the second phase of the continuum and has to be developed. Several possibilities exist. In theory extension, the preexisting constructs are extended to other groups or other contexts. In theoretical refinement, a modification of existing theoretical perspectives is conducted (Edmondson and McManus ( 2007 ). New antecedents, moderators, mediators, and outcomes are investigated, enhancing the explanation power of the tentative theory.

3.2.3 Test of theories

Constructs and relationships are well developed to a mature state; measures are precise and operationalized. Such theories are empirically tested with elaborate methods, and research questions are more precise. In the quantitative realm, testing of hypotheses is conducted and statistical analysis is the usual methodological foundation. Recently, researchers criticize that testing theories has become the major focus of scientists today (Delbridge and Fiss 2013 ); testing theories does not only happen to mature theory but to intermediate theory as well. The boundary between theory development and theory testing is not always so clear. While theory development is adding new components to a theory and elaborating the measures, testing a theory implies precise measures, variables, and predicted relationships considering time and space (Gilbert and Christensen ( 2005 ). It will be of interest whether case studies are eligible to test theories as well.

To summarize: there is a conversation as to where on a continuum of theory development, various methods are required to target different contributions to theory (methodological fit). In this discussion, case study research designs have been discussed as a homogeneous set that mostly contributes to theory-building in an exploratory manner. Hence, what is missing is a more differentiated analysis of how case study methodology fits into this conversation, particularly how case study research methodologically fits theory development and theory testing beyond its widely assumed explorative role. In the following section, the above types of case study research designs will be discussed with regard to their positions across the theory continuum.

This distinction adds to existing literature by demonstrating that case study research does not only contribute to theory-building, but also to the development of tentative theories and to the testing of theories. This distinction leads to the next question: is there any interplay between case study research designs and their contributions to the theory continuum? This paper aims at reconciling this interplay with regard to case study design by mirroring phases of a theory continuum with specific types of case study research designs as outlined above. The importance of the interplay between theory and method lies in the capacity to generate and shape theory, while theory can generate and shape method. “In this long march, theory and method surely matter, for they are the tools with which we build both our representations and understandings of organizational life and our reputations” (van Maanen et al. 2007 : 1145). Theory is not the same as methods, but a relationship of this interplay can broaden or restrict both parts of the equation (Swedberg 2012 : 7).

In the following, I discuss how the above-delineated case study research designs unfold their capacities and contribute differently to the theory continuum to build, develop, and test theory.

4 Discussion of the contribution of case study research to a theory continuum

Case study research is diverse with distinct contributions to the continuum of theory. The following table provides the main differences in terms of contributions to theory and specifically locates the case study research designs on the theory continuum (Table  2 ).

In the following, I outline how these specific contributions of case study designs provide better opportunities to enhance the rigor of building theory, developing theory, testing, and reconstructing theory.

4.1 Building theory

In building theory, the phenomenon is new or not understood so far. There is no theory which explains the phenomenon. At the very beginning of the theory continuum, there is curiosity in the phenomenon itself. I focus on the intrinsic case study design which is located in the social construction of reality approach on the very early phase of the theory continuum, as intrinsic case study research design is not theory-building per se but curiosity in the case itself. It is not the purpose of the intrinsic case study to identify abstract concepts and relationships; the specific research strategy lies in the observation and description of a case and the primary method is observation, enabling understanding from personal and vicarious experience. This meets long lasting complaints concerning the lack of (new) theory in management and organization research and signals that the gap between research and management practice is growing. It is argued that the complexity of the reality is not adequately captured (Suddaby et al. 2011 ). It is claimed that management and organization research systematically neglect the dialogue with practice and, as a result, miss new trends or recognize important trends with delay (Corley and Gioia 2011 ).

The specific case study research design’s contribution to theory is in building concrete, context-dependent knowledge with regard to the identification of new phenomena and trends. Openness with regard to the new phenomena, avoiding theoretical preconceptions but building insights out of data, enables the elaboration of meanings and the construction of realities in intrinsic case studies. Intrinsic case studies will enhance the understanding by researcher and reader concerning new phenomena.

The “No Theory First” case study research design is a classic and often cited candidate for building theory. As the phenomenon is new and in the absence of a theory, qualitative data are inspected for aggregation and interpretation. In instrumental case study design, a number of cases will increase the understanding and support building theories by description, aggregation, and interpretation (Stake 2000 ). New themes and concepts are revealed by case descriptions, interviews, documents, and observations, and the analysis of the data enables the specific contribution of the case study design through a constructivist perspective in theory-building.

Although the design by Eisenhardt ( 1989 ) stems from other philosophical assumptions and there are variations and developments in this design, there is still an overwhelming tendency to quote and to stick to her research strategy which aims developing new constructs and new relationships out of real-life cases. Data are collected mainly by interviews, documents, and observations. From within-site analysis and cross-case analysis, themes, concepts, and relationships emerge. Shaping hypotheses comprises: “… refining the definition of the construct and (…) building evidence which measures the construct in each case” (Eisenhardt 1989 : 541). Having identified the emerged constructs, the emergent relationships between constructs are verified in each case. The underlying logic is validation by replication. Cases are treated as experiments in which the hypotheses are replicated case by case. In replication logic cases that confirm the emergent relationships enhance confidence in the validity of the relationships. Disconfirmation of the relationships leads to refinement of the theory. This is similar to Yin’s replication logic, but targets the precision and measurement of constructs and the emerging relationships with regard to the emerging theory. The building of a theory concludes in an understanding of the dynamics underlying the relationship; the primary theoretical reasons for why the relationships exist (Huy 2012 ). Finally, a visual theory with “boxes and arrows” (Eisenhardt and Graebner 2007 ) may visually demonstrate the emerged theory. The theory-building process is finalized by iterating case data, emerging theory, and extant literature.

The “No Theory First” and “Social Construction of Reality” case study research designs, although they represent different philosophical assumptions, adequately fit the theory-building phase concerning new phenomena. The main contribution of case study designs in this phase of the theory continuum lies in the generation of tentative theories.

Case studies at this point of the theory continuum, therefore, have to demonstrate: why the phenomenon is new or of interest; that no previous theory that explains the phenomenon exists; how and why detailed descriptions enhance the understanding of the phenomenon; and how and why new concepts (constructs) and new relationships will enhance our understanding of the phenomenon.

As a result, it has to be demonstrated that the research strategy is in sync with an investigation of a new phenomenon, building a tentative theory.

4.2 Developing theory

In the “Gaps and Holes” case study research design, the phenomenon is partially understood. There is a tentative theory and the research strategy is theory driven. Compared to the theory-building phase, the existence and not the development of propositions differentiate this design along the continuum. The prediction comes first, out of an existing theory. The research strategy and the data have to be confronted by pattern-matching. Pattern-matching is a means to compare the theoretically based predictions with the data in the site: “For case study analysis, one of the most preferred techniques is to use a pattern-matching logic. Such a logic (…) compares an empirically based pattern–that is, one based on the findings from your case study–with a predicted one made before you collected your data (….)” (Yin 2014 : 143). The comparison of propositions and the rich case material is the ground for new elements or relationships within the tentative theory.

Such findings aim to enhance the scientific usefulness of the theory (Corley and Gioia 2011 ). To enhance the validity of the new elements or relationships of the tentative theory, literal replication is a means to confirm the new findings. By that, the theory is developed by new antecedents, moderators, mediators, or outcomes. This modification or extension of the theory contributes to the analytical generalization of the theory.

If new cases provide similar results, the search for regularities is based on more solid ground. Therefore, the strength of case study research in “Gaps and Holes” lies in search for mechanisms in their specific context which can reveal causes and effects more precisely.

The “Gaps and Holes” case study research design is an adequate candidate for this phase of the theory continuum. Case studies at this point of the theory continuum, therefore, have to outline the tentative theory; to demonstrate the lacks and gaps of the tentative theory; to specify how and why the tentative theory is aimed to be extended and/or modified; to develop theoretically based propositions which guide the investigation; and to evaluate new elements, relationships, and mechanisms related to the previous theory (analytical generalization).

As a result and compared to theory-building, a different research strategy exists. While in theory building the research strategy is based on the eliciting of concepts (constructs) and relationships out of data, in theory development, it has to be demonstrated that the research strategy aims to identify new elements and relationships within a tentative theory, identifying mechanisms which explain the phenomenon more precisely.

4.3 Test of theory

In “Gaps and Holes” and “Anomalies”, an extended theory exists. The phenomenon is understood. There is no search for additional components or relationships. Mechanisms seem to explain the functioning or processes of the phenomenon. The research strategy is focused on testing whether the theory holds under different circumstances or under different conditions. Such a test of theories is mainly the domain of experimental and quantitative studies. It is based on previously developed constructs and variables which are the foundation for stating specific testable hypotheses and testing the relations on the basis of quantitative data sets. As a result, highly sophisticated statistical tools enable falsification of the theory. Therefore, testing theory in “Gaps and Holes” is restricted on specific events.

Single case can serve as a test. There is a debate in case study research whether the test of theories is related to the falsification logic of Karl Popper (Flyvbjerg 2006 ; Tsang 2013 ). Another stream of the debate is related to theoretical generalizability (Hillebrand et al. 2001 ; Welch et al. 2011 ). More specifically, test in” Gaps and Holes” is analogous to a single experiment if a single case represents a critical case. If the theory has specified a clear set of propositions and defines the exact conditions within which the theory might explain the phenomena under investigation, a single case study, testing the theory, can confirm or challenge the theory. In sum Yin states: “Overall, the single-case design is eminently justifiable under certain conditions—where the case represents (a) a critical test of existing theory, …” (Yin 2014 : 56). In their survey in the field of International Business, Welch et al. conclude: “In addition, the widespread assumption that the role of the case study lies only in the exploratory, theory-building phase of research downplays its potential to propose causal mechanisms and linkages, and test existing theories” (Welch et al. 2011 : 755).

In multiple case studies, a theoretical replication is a test of theory by comparing the findings with new cases. If a series of cases have revealed pattern-matching between propositions and the data, theoretical replication can be revealed by new waves of cases with contrasting propositions. If the contrasting propositions reveal contrasting results, the findings of the first wave are confirmed. Several possibilities exist to test the initial findings of multiple case studies using different lenses from inside and outside the management realm (Corley and Gioia 2011 ; LePine and Wilcox-King 2010 ; Okhuysen and Bonardi 2011 ; Zahra and Newey 2009 ), but have not become a standard in case study research.

In rival explanations, rival theoretical propositions are developed as a test of the previous theory. This can be distinguished from theoretical replication where contrasting propositions aim to confirm the initial findings. This can, as well, be distinguished from developing theory where rival explanations might develop theory by the elimination of possible influences (interventions, implementations). The rich data enable one to identify internal and external interventions that might be responsible for the findings. Alternative explanations in a new series of cases enable to test, whether a theory “different from the original theory explains the results better (…)” (Yin 2014 : 141).

As a result, it astonishes that theoretical replication and rival explanations, being one of the strengths of case study research, are rarely used. Although the general debate about “lenses” has informed the discussion about theory contributions, this paper demonstrates that there is a wide range of possible integration of vertical or horizontal lenses in case study research design. Case study research designs aiming to test theories have to outline modes of replication and the elimination of rival explanations.

The “anomaly approach” is placed in the final phase of the theory testing, as well. In this approach, a theory exists, but the theory fails to explain anomalies. Burawoy goes a step further. While Yin ( 2014 ) sees a critical case as a test that challenges or contradicts a well formulated theory, in Burawoy’s approach, in contrast to falsification logic (Popper 2002 ), the theory is not rejected but reconstructed. Burawoy relates extended case study design to society and history. Existing theory is challenged by intervention into the social field. Identifying processes of historical roots and social circumstances and considering external forces by structuration lead to the reconstruction of the theory.

It is surprising that this design has been neglected so far in management research. Is there no need to reflect social tensions and distortions in management research? While case study research has, per definition, to investigate phenomena in its natural environment, it is hard to understand why this design has widely been ignored in management and organization research. As a result, testing theory in case study research has to demonstrate that an extended theory exists; a critical case or an anomaly can challenge the theory; theoretical replication and rival explanations will be means to contradict or confirm the theory; and societal circumstances and external forces explain the anomaly.

Compared to theory-building (new concepts/constructs and relationships out of data) and theory development (new elements and relationships within a tentative theory), testing theory challenges extended theory by empirical investigations into failures and anomalies that the current theory cannot explain.

5 Conclusion

Case studies provide a better understanding of phenomena regarding concrete context-dependent knowledge (Andersen and Kragh 2010 ; Flyvbjerg 2006 : 224), but as literature reviews indicate, there is still confusion regarding the adequate utilization of case study methodology (Welch et al. 2011 ). This can be interpreted in a way that authors and even reviewers are not always aware of the methodological fit in case study research. Case study research is mainly narrowed to its “explorative” function, neglecting the scope of possibilities that case study research provides. The claim for more homogeneity of specified rules in case study research misses the important aspect that a method is not a means in itself, but aims at providing improved theories (van Maanen et al. 2007 ). This paper contributes to the fit of case study research designs and the theory continuum regarding the following issues.

5.1 Heterogeneity of case study designs

Although case study research, overall, has similar characteristics, it incorporates various case study research designs that have heterogeneous theoretical goals and use various elements to reach these goals. The analysis revealed that the classical understanding, whereby case study research is adequate for the “exploration” of a theory and quantitative research is adequate for “testing” theory, is oversimplified. Therefore, the theoretical goals of case study research have to be outlined precisely. This study demonstrates that there is variety of case study research designs that have thus far been largely neglected. Case study researchers can utilize the entire spectrum, but have to consider how the phenomenon is related to the theory continuum.

Case study researchers have to demonstrate how they describe new or surprising phenomena, develop new constructs and relationships, add constructs (variables), antecedents, outcomes, moderators, or mediators to a tentative theory, challenge a theory by a critical case, theoretical replication or discarding rival explanations, and reconstruct a theory by tracking failures and anomalies to external circumstances.

5.2 Methodological fit

The rigor of the case study can be enhanced by considering the specific contribution of various case study research designs in each phase of the theory continuum. This paper provides a portfolio of case study research designs that enables researchers and reviewers to evaluate whether the case study arsenal has been adequately located:

At an early phase of the theory continuum, case studies have their strengths in rich descriptions and investigations into new or surprising empirical phenomena and trends. Researchers and readers can benefit from such rich descriptions in understanding and analyzing these phenomena.

Next, on the theory continuum, there is the well-known contribution of case study research in building tentative theory by eliciting constructs or concepts and their relationships out of data.

Third, development of theories is strongly related to literal replication. Strict comparisons, on the one hand, and controlled theoretical advancement, on the other hand, enable the identification of mechanisms, strengthen the notions of causality, and provide generalizable statements.

Fourth, there are specific circumstances under which case study approaches enable one to test theories. This is to confront the theory with a critical case, to test findings of pattern-matching by theoretical replication and discarding rival explanations. Therefore, “Gaps and Holes” provide the opportunity for developing and testing theories through case study design on the theory continuum.

Finally, testing and contradicting theory are not the final rejection of a theory, but is the basis for reconstructing theory by means of case study design. Anomalies can be traced to historical sources, social processes, and external forces.

This paper demonstrates that the precise interplay of case study research designs and theory contributions on the theory continuum is a prerequisite for the contribution of case study research to better theories. If case study research design is differentiated from qualitative research, the intended contribution to theory is stated and designs that fit the aimed contribution to theory are outlined and substantiated; this will critically enhance the rigor of case study research.

Alvesson, M., and D. Kärreman. 2007. Constructing mystery: Empirical matters in theory development. Academy of Management Review 32: 1265–1281.

Article   Google Scholar  

Andersen, P.H., and H. Kragh. 2010. Sense and sensibility: two approaches for using existing theory in theory-building qualitative research. Industrial Marketing Management 39: 49–55.

Bacharach, S.B. 1989. Organizational theories: some criteria for evaluation. Academy of Management Review 14: 496–515.

Google Scholar  

Baxter, P., and S. Jack. 2008. Qualitative case study methodology: study design and implementation for novice researchers. The Qualitative Report 13: 544–559.

Bingham, C.B., and K.M. Eisenhardt. 2011. Rational heuristics: the ‘simple rules’ that strategists learn from process experience. Strategic Management Journal 32: 1437–1464.

Burawoy, M. 1991. Ethnography unbound . Power and resistance in the modern metropolis: University of California Press.

Burawoy, M. 1998. The extended case method. Sociological Theory 16: 4–33.

Burawoy, M. 2009. The extended case method. Four countries, four decades, four great transformations, and one theoretical tradition . Berkeley: University of California Press.

Burns, R.B. 2000. Introduction to research methods . United States of America: SAGE publications.

Campbell, J.P. 1990. The role of theory in industrial and organizational psychology. In Handbook of industrial and organizational psychology , 2nd ed, ed. M.D. Dunnette, L.M. Hough, and H.C. Triandis, 39–73. Palo Alto: Consulting Psychologists Press.

Chiles, T.H. 2003. Process theorizing: too important to ignore in a kaleidic world. Academy of Management Learning & Education 2: 288–291.

Colquitt, J.A., and C.P. Zapata-Phelan. 2007. Trends in theory building and theory testing: a five-decade study of the Academy of Management Journal. Academy of Management Journal 50: 1281–1303.

Corbin, J.M., & Strauss, A.L. 2015. Basics of qualitative research: Techniques and procedures for developing grounded theory (4th ed). Los Angeles, CA: Sage Publications.

Corley, K.G., and D.A. Gioia. 2011. Building theory about theory building: what constitutes a theoretical contribution? Academy of Management Review 36: 12–32.

Danneels, E. 2011. Trying to become a different type of company: dynamic capability at Smith Corona. Strategic Management Journal 32: 1–31.

Davis, J.P., and K.M. Eisenhardt. 2011. Rotating leadership and collaborative innovation: recombination processes in symbiotic relationships. Administrative Science Quarterly 56: 159–201.

Delbridge, R., and P.C. Fiss. 2013. Editors’ comments: styles of theorizing and the social organization of knowledge. Academy of Management Review 38: 325–331.

Dooley, L.M. 2002. Case study research and theory building. Advances in Developing Human Resources 4: 335–354.

Dubin, R. 1978. Theory building . New York: Free Press.

Dyer, W.G., and A.L. Wilkins. 1991. Better stories, not better constructs, to generate better theory: a rejoinder to Eisenhardt. Academy of Management Review 16: 613–619.

Edmondson, A.C., and S.E. McManus. 2007. Methodological fit in management field research. Academy of Management Review 32: 1155–1179.

Eisenhardt, K.M. 1989. Building theories from case study research. Academy of Management Review 14: 532–550.

Eisenhardt, K.M. 1991. Better stories and better constructs: The case for rigor and comparative logic. Academy of Management Review , 16(3): 620–627.

Eisenhardt, K.M., and M.E. Graebner. 2007. Theory building from cases: opportunities and challenges. Academy of Management Journal 50: 25–32.

Ellonen, H.K., P. Wikström, and A. Jantunen. 2009. Linking dynamic-capability portfolios and innovation outcomes. Technovation 29: 753–762.

Fiss, P.C. 2009. Case studies and the configurational analysis of organizational phenomena. In The SAGE handbook of case-based methods , ed. D.S. Byrne, and C.C. Ragin, 424–440. London/Thousand Oaks: SAGE.

Chapter   Google Scholar  

Flick, U. 2009. An introduction to qualitative research , 4th ed. London: SAGE.

Flyvbjerg, B. (2006). Five misunderstandings about case-study research. Qualitative Inquiry , 12(2): 219–245.

Gilbert, C.G., and C.M. Christensen. 2005. Anomaly-seeking research: thirty years of development in resource allocation theory. In From resource allocation to strategy , ed. J.L. Bower, and C.G. Gilbert, 71–89. Oxford: University Press, Oxford.

Gioia, D.A., K.G. Corley, and A.L. Hamilton. 2013. Seeking qualitative rigor in inductive research: notes on the Gioia methodology. Organizational Research Methods 16: 15–31.

Gomm, R., M. Hammersley, and P. Foster. 2000. Case study method. Key issues, key texts . London/Thousand Oaks: Sage Publications.

Greenwood, R., and R. Suddaby. 2006. Institutional entrepreneurship in mature fields: the big five accounting firms. Academy of Management Journal 49: 27–48.

Guba, E.G., and Y.S. Lincoln. 2005. Paradigmatic controversies, contradictions, and emerging confluences. In The SAGE handbook of qualitative research , 3rd ed, ed. N.K. Denzin, and Y.S. Lincoln, 191–215. London, Thousand Oaks: Sage Publications.

Hillebrand, B., R.A.W. Kok, and W.G. Biemans. 2001. Theory-testing using case studies: a comment on Johnston, Leach, and Liu. Industrial Marketing Management 30: 651–657.

Huy, Q.N. 2012. Improving the odds of publishing inductive qualitative research in Premier Academic Journals. The Journal of Applied Behavioral Science 48: 282–287.

Ituma, A., R. Simpson, F. Ovadje, N. Cornelius, and C. Mordi. 2011. Four ‘domains’ of career success: how managers in Nigeria evaluate career outcomes. The International Journal of Human Resource Management 22: 3638–3660.

Kaplan, A. 1998. The conduct of inquiry. Methodology for behavioral science . New Brunswick, N.J.: Transaction Publishers.

Lee, T.W. 1999. Using qualitative methods in organizational research. Organizational research methods series . Thousand Oaks: Sage Publications.

LePine, J.A., and A. Wilcox-King. 2010. Editors´s comments: developing novel theoretical insight from reviews of existing rheory and research. Academy of Management Review 35: 506–509.

Mason, J. 2002. Qualitative researching , 2nd ed. London, Thousand Oaks: Sage Publications.

Miles, M.B., Huberman, M.A., & Saldana, J. 2014. Qualitative data analysis: A methods sourcebook (3rd ed). Los Angeles, CA: Sage Publications.

Okhuysen, G., and J.P. Bonardi. 2011. The challenges of building theory by combining lenses. Academy of Management Review 36: 6–11.

Piekkari, R., C. Welch, and E. Paavilainen. 2009. The case study as disciplinary convention: evidence from international business journals. Organizational Research Methods 12: 567–589.

Popper, K.R. 2002. Logik der Forschung . Tübingen: Mohr Siebeck.

Ravenswood, K. 2011. Eisenhardt’s impact on theory in case study research. Journal of Business Research 64: 680–686.

Ridder, H.G. 2016. Case study research. Approaches, methods, contribution to theory. Sozialwissenschaftliche Forschungsmethoden , vol. 12. München/Mering: Rainer Hampp Verlag.

Schwandt, T.A. 1994. Constructivist, interpretivist approaches to human inquiry. In Handbook of qualitative research , ed. N.K. Denzin, and Y.S. Lincoln, 118–137. Thousand Oaks: Sage Publications.

Shah, S.K., and K.G. Corley. 2006. Building better theory by bridging the quantitative–qualitative divide. Journal of Management Studies 43: 1821–1835.

Shane, S. 2000. Prior knowledge and the discovery of entrepreneurial opportunities. Organization Science 11: 448–469.

Snow, C.C. 2004. Thoughts on alternative pathways to theoretical development: Theory generation, extension, and refinement. In Workshop on scientific foundations of qualitative research , ed. C.C. Ragin, J. Nagel, and P. White, 133–136. Arlington, VA: National Science Foundation.

Stake, R.E. 1995. The art of case study research . London, Thousand Oaks: Sage Publications.

Stake, R.E. 2000. The case study and generalizability. In Case study method. Key issues, key texts , ed. R. Gomm, M. Hammersley, and P. Foster, 19–26. London/Thousand Oaks: Sage Publications.

Stake, R.E. 2005. Qualitative case studies. In The SAGE handbook of qualitative research , 3rd ed, ed. N.K. Denzin, and Y.S. Lincoln, 443–466. London, Thousand Oaks: Sage Publications.

Suddaby, R. 2010. Editor’s comments: construct clarity in theories of management and organization. Academy of Management Review 35: 346–357.

Suddaby, R., C. Hardy, and Q.N. Huy. 2011. Introduction to special topic forum: where are the new theories of organization? Academy of Management Review 36: 236–246.

Sutton, R.I., and B.M. Staw. 1995. What theory is not. Administrative Science Quarterly 40: 371–384.

Swedberg, R. 2012. Theorizing in sociology and social science: turning to the context of discovery. Theory and Society 41: 1–40.

Tsang, E.W.K. 2013. Generalizing from research findings: the merits of case studies. International Journal of Management Reviews 16: 369–383.

van Maanen, J., J.B. Sørensen, and T.R. Mitchell. 2007. The interplay between theory and method. Academy of Management Review 32: 1145–1154.

Vaughan, D. 1992. Theory elaboration: The heuristics of case analysis. In What is a case? , ed. C.C. Ragin, and H.S. Becker, 173–202. Exploring the foundations of social inquiry: Cambridge University Press, Cambridge, New York.

Wadham, H., and R.C. Warren. 2014. Telling organizational tales the extended case method in practice. Organizational Research Methods 17: 5–22.

Weick, K.E. 1989. Theory construction as disciplined imagination. Academy of Management Review 14: 516–531.

Weick, K.E. 1995. What theory is not, theorizing is. Administrative Science Quarterly 40: 385–390.

Welch, C., R. Piekkari, E. Plakoyiannaki, and E. Paavilainen-Mäntymäki. 2011. Theorising from case studies: towards a pluralist future for international business research. Journal of International Business Studies 42: 740–762.

Whetten, D.A. 1989. What constitutes a theoretical contribution? Academy of Management Review 14: 490–495.

Yin, R.K. 2014. Case study research. Design and methods , 5th ed. London, Thousand Oaks: Sage Publications.

Zahra, S.A., and L.R. Newey. 2009. Maximizing the Impact of Organization Science: theory-Building at the Intersection of Disciplines and/or Fields. Journal of Management Studies 46: 1059–1075.

Download references

Author information

Authors and affiliations.

Institute of Human Resource Management, Leibniz University of Hannover, Königsworther Platz 1, 30167, Hannover, Germany

Hans-Gerd Ridder

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Hans-Gerd Ridder .

Additional information

I thank two anonymous reviewers for their constructive comments. I am grateful for valuable thoughts generously provided by Ann Kristin Zobel.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Ridder, HG. The theory contribution of case study research designs. Bus Res 10 , 281–305 (2017). https://doi.org/10.1007/s40685-017-0045-z

Download citation

Received : 26 January 2016

Accepted : 06 February 2017

Published : 16 February 2017

Issue Date : October 2017

DOI : https://doi.org/10.1007/s40685-017-0045-z

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Case studies
• Research design
• Heterogeneity of case study designs
• Theory continuum
• Methodological fit
• Contribution to theory
• Find a journal
• Publish with us
• Track your research

Warning: The NCBI web site requires JavaScript to function. more...

An official website of the United States government

The .gov means it's official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you're on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings
• Browse Titles

NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.

Moore SC, Allen D, Amos Y, et al. Evaluating alcohol intoxication management services: the EDARA mixed-methods study. Southampton (UK): NIHR Journals Library; 2020 Jun. (Health Services and Delivery Research, No. 8.24.)

Evaluating alcohol intoxication management services: the EDARA mixed-methods study.

Chapter 5 ethnographic case studies.

This section analyses the work of managing AAI and alcohol-related risk and harm in the NTE. It compares the two AIMS case studies (sites A and B) with the non-AIMS case study (site J; see Appendix 9 ). Analyses are presented thematically to draw out points of commonality and difference between the cases. The services covered in this study are described in Chapter 3 .

• Case studies

Case study 1: site A

The site A NTE ( Figure 5 ) has a high density of premises licensed for the on- and off-site sale of alcohol. It has a large student population and is a destination city, attracting people from surrounding areas and across the UK every weekend. The central actor in managing the acutely intoxicated is the AIMS, which is based in a permanent location in the city centre. Established in September 2012 through a partnership between the health board, the police and the ambulance service, the AIMS was a response to the growing challenge of managing acutely intoxicated individuals in the ED and the stress that it was causing staff and patients. Its primary aim was to divert individuals with AAI and/or minor injuries away from the ED on Friday and Saturday nights. Personnel were funded initially by grants from the Substance Misuse Area Fund and the Regional Collaboration Fund and volunteered to work in the AIMS on an overtime basis. Grants reduced and although hospital staff, paramedics and EMTs continue to volunteer to work in the service on an overtime basis, the shift now forms part of the core duties of health-care workers and police officers.

Ethnographic infographic for case study 1.

Case study 2: site B

Site B has a compact, densely populated NTE ( Figure 6 ). It has a large student population and, like site A, it attracts people from the surrounding areas, including for hen and stag parties. The central actor in managing the NTE is the AIMS. Located in two portable buildings in a city centre car park, the service was established in September 2014 through a partnership between the health board, St John Ambulance, ambulance service, local authority, police and a local university. Founded on a number of partnership initiatives that had been operating in the NTE since the early 2000s, the service’s primary aims are to alleviate the demand on emergency services (police and ambulance services and ED) and to create a safer NTE by diverting individuals who may be acutely intoxicated, injured and/or vulnerable to an alternative facility. The AIMS is led by St John Ambulance.

Ethnographic infographic for case study 2.

Case study 3: site J

The site J NTE ( Figure 7 ) is characterised by a large student population and is a destination for drinkers across the UK. Unlike sites A and B, the city does not tend to attract people from surrounding areas, perhaps owing to the number of other large cities nearby, nor does it have a reputation as a destination city attracting stag and hen parties. The NTE does not have an AIMS but operates a number of partnership initiatives designed to improve the safety of its NTE through promoting best practice among bars and clubs. It also runs K-responder, a joint initiative between the police and the ambulance service intended to reduce the demand on these services in the city centre over Friday and Saturday nights, which has been in operation for around 6 years. A paramedic practitioner (on overtime) and one or two special constables (police volunteers with power to arrest) respond to calls predominantly from licensed premises in and around the city centre on Friday and Saturday nights in a RRV.

Ethnographic infographic for case study 3. Resus, resuscitation area.

• Alcohol-related risk and the night-time environment: the ecology of work

The work of managing alcohol-related risk in the NTE is multifaceted and involves a range of preventative and responsive strategies divided between the police, ambulance crews, health-care providers, Street Pastors, door workers, the public and taxi drivers. The management of alcohol-related risk is undertaken alongside the core work of front-line emergency services, be that preventing crime, responding to acute medical emergencies or providing charitable support. With no single agency responsible for managing alcohol-related risk, AIMSs operate as central actors in co-ordinating activity in the NTE. In the absence of an AIMS, the ED functions as the central actor, exerting power at a distance on the work of police and ambulance crews whose work is driven by an organising logic aimed at avoiding inappropriate ED attendances.

• Public services

The primary focus of police work in the NTE is to deal with perpetrators and victims of crime and alcohol-related crime. Police work in the NTE was organised differently than at other times of the day. It aims to be preventative rather than reactive and is designed to ensure high visibility to enhance safety, deter criminal activity and facilitate early intervention to prevent issues escalating. In all sites, police work entailed active and friendly engagement with patrons of the NTE and the use of dispersal notices to manage antisocial behaviour. Arrests were avoided where possible, because this involves additional administrative work and takes officers away from the front line if they are required to place someone in custody. Police work also involved intervening with individuals who were intoxicated and/or vulnerable or injured, although this varied across the sites. In the sites with AIMSs, there was more proactive police engagement with this population and referral of cases to the AIMS either directly or via a third party (e.g. ambulance, Street Pastors). At site J, in the absence of an AIMS and with no referral pathway available to them, officers displayed a disinclination to engage with the acutely intoxicated because their management could be protracted and took them away from their core duties. At sites A and B, a police officer also worked in the respective AIMS, primarily to protect health-care staff, intervene in any incidents and interview victims of crime. Officers also assisted with AIMS work, such as information gathering, handing out vomit bowls, tidying and cleaning up after patients, helping nurses to contact friends or family and interacting with patients and/or their friends or family.

Ambulance crews

Ambulance crews play a key role in managing alcohol-related risk in the NTE, but this varied across sites. At site A, a mobile medics crew operated from the AIMS and responded to all city centre 999 calls plus radio calls generated from street-level agents. At site B, all city centre 999 calls were directed to the AIMS, leaving ambulance crews to deal with other emergency calls outside the city. At both sites, city centre 999 calls were triaged by ambulance operatives. At site A, mobile medics were the resource of choice to respond to city centre calls, but other ambulance resources would be dispatched if the mobile medics were not available. At site B, if an 8-minute response was indicated, an ambulance resource would be dispatched prior to the call being transferred to the AIMS if St John Cymru resources were unavailable, but usually the Welsh Ambulance Services NHS Trust (WAST) resource was ‘stood down’ for AIMS staff to attend. At site J, city centre calls were managed by either the K-responder or regular crews.

The work of ambulance crews is to assess the case and make a disposal decision. In the case studies with AIMSs they could treat at scene, refer to AIMS or refer to ED. At site J, in the absence of an AIMS, the only options were to treat at the scene or refer to ED.

• Health-care providers

Health-care workers have a key role in managing alcohol-related harm and risk. This entails clinical assessment and triage, attending to minor injuries, care of individuals who have lost control of bodily functions, assisting people to sober up, dispatching individuals into the care of friends and family and identifying those with a more serious underlying health condition such as head injury or health need (such as assistance with maintaining an airway). At sites A and B, much of this work was carried out by AIMS staff, with only serious cases referred to ED (such as individuals with a potential head injury or requiring radiography or treatment for minor injuries that were either beyond the scope of practice of AIMS staff or dependant on resources that were not available). Both AIMSs also functioned as a place of safety for people who were intoxicated and/or vulnerable. Only nurses with enough experience of working weekend nights in the ED were considered for AIMS shifts because they would be experienced in dealing with the AIMS patient population and have the skills to identify risk.

Street Pastors

Street Pastors, one of the many volunteer initiatives run by the Ascension Trust (London, UK), operated in each of the three case study sites. Pastors understood their NTE work to fulfil their responsibilities as good Christians by helping the vulnerable. Pastors tailored their work to each locale and the needs of individuals. In city centres this is generally understood to mean helping individuals who are intoxicated, although their work extends beyond intoxicated individuals to anyone who was vulnerable. Although not clinically qualified, all Street Pastors had undergone drug and alcohol training and, at site A, basic life support training was also provided by one of the ED nurses as a direct result of the Street Pastors’ involvement in the AIMS partnership.

Street Pastors worked at street level and intervened in a number of ways to ensure the safety and well-being of the patrons of the NTE by, for example, interacting with homeless people and providing them with chocolate, water and/or blankets; handing out water and/or flip flops; offering assistance to those who appeared to be intoxicated and/or vulnerable and/or injured; collecting glass bottles and safely disposing of them to prevent glass injuries and their use in potential assaults; and assisting individuals into taxis to get home or those who were lost.

The role of Street Pastors in the NTE varied across the case study sites. In all cases they were actively involved in managing intoxicated and/or injured individuals. At sites A and J they responded to calls for assistance from other agents in the NTE (door staff, police, taxi ambassadors, mobile medics) and at site A they made referrals to the AIMS. At site B, Street Pastors were less integrated into the management of alcohol intoxication and alcohol-related risk in the wider NTE ecology, possibly because of the availability of student volunteers aligned with the AIMS who fulfilled the functions performed by Street Pastors in other cases. At site J, of the four agencies shadowed, the Street Pastors and the K-responder teams were the only agencies that understood dealing with intoxicated individuals to be one of the core purposes of their work and not a distraction from it.

St John Cymru

St John Cymru, the Welsh arm of St John Ambulance, is a third-sector organisation operating across Wales. It provides first aid, training, first aid equipment and resources, patient transport and first aid cover for events. It is the lead organisation in the operation of the AIMS at site B.

Metropolitan Police Service student volunteers

The site B AIMS is supported by two to six Metropolitan Police Service (MPS) student volunteers (male or female) depending on availability and anticipated demand. All student volunteers attend a local university and are given the opportunity to volunteer at the AIMS as part of their undergraduate degree in public services. Students who choose to do this commit for the entire 3 years of their course. All volunteers undertake training in first aid (provided by St John Cymru), manual handling, vulnerability training and violence and aggression training. MPS volunteers retrieved patients, brought them to the AIMS and undertook proactive patrols in the city centre looking for potentially injured, intoxicated and/or vulnerable individuals who needed assistance and/or referral to the AIMS.

• Private agencies

Door workers

Door workers, typically employed by licensed premises, also have a role in managing alcohol-related risk in the NTE. They can refuse entry to individuals who appear acutely intoxicated and intervene in cases where an individual’s behaviour suggests intoxication. Sometimes intoxicated individuals were managed inside the venue by being moved into a separate first aid area and their needs (e.g. receiving water, calling friends) met. Door staff also referred cases to other NTE agents as appropriate.

Taxi drivers

Taxi drivers in the NTE often have a role in transporting intoxicated patients to and from the city centre in exchange for a fare. Intoxicated individuals are considered to be risky customers. If someone vomits in the back of a taxi, this costs the driver time and lost earnings because of the need to clean the vehicle. Nonetheless, intoxicated individuals are an important source of income for drivers. Taxi drivers who chose to work these nights mitigated these risks by attempting to judge how intoxicated individuals appeared before allowing them into their cabs. Some male drivers were also wary of accepting lone female passengers because they did not want to be accused of sexual assault.

Site B made extensive use of taxis to transport people to ED and home, although the site B city centre Street Pastors were more cautious about taxi use. Site A staff used taxis to transport individuals with minor injuries to ED and home but relied on known drivers only. At site J, NTE agents used taxis to get people home and to attend ED for minor injuries but reported that drivers often refused to transport an intoxicated passenger. Site J Street Pastors described how they tried to stay out of sight when escorting individuals to a taxi rank to avoid being a ‘red flag’ to taxi drivers, because many taxi drivers refused to take intoxicated individuals. Ambulance crews identified the refusal of taxi drivers to transport intoxicated individuals to ED as a reason for inappropriate use of ambulance resources. At both site A and site B, the city council runs a taxi ambassadors (council employees) scheme to oversee the taxi rank, directing patrons into taxis, ensuring that taxis take patrons or, in cases where drivers refuse to take an intoxicated patron, radioing the AIMS for assistance. At site J there were only taxi drivers, no taxi ambassadors. Taxi drivers sometimes refused to transport intoxicated patrons to ED, leaving the task to other services:

That’s half the battle really; if the taxis would take them we wouldn’t have to take them, but we have no choice but to take them to A&E [accident and emergency department]. M (emergency care assistant)

(Quotation attributions minimally describe respondents’ roles while ensuring anonymity, but with sufficient detail to link data with the original transcripts.)

• Alcohol-related risk in the night-time environment

The challenges of managing alcohol-related risk

Alcohol-related risk and harm in the NTE presents in diverse ways. It includes those who have sustained minor or major injury either through accident or assault, individuals who are ‘worse for wear’ (often unable to control bodily functions) and require support to sober up, individuals who are unresponsive (‘flat out’), the acutely vulnerable (such as intoxicated young women who had become separated from friends) and others with longer-term vulnerabilities such as mental ill health, homelessness and alcoholism and other addictions.

People who are intoxicated present several challenges to workers in the NTE. They are often difficult to reason with and considered to have the potential to become violent and aggressive; they may also be reluctant to wait in ED to be seen. Dealing with alcohol intoxication is also ‘dirty’ work, with acutely intoxicated individuals likely to lose control of their bodily functions. Arguably, the most important challenge is assessing if an individual simply needs time to sober up or there is a more serious reason for their symptoms, such as a head injury requiring specialist care:

It’s too risky to discharge on scene. I don’t doubt some do, but you have to be really careful, they could have a head injury, or they could choke on their vomit. Ambulance crew member (site B)

Acutely intoxicated people are often unable to offer an account of what has happened to them, with agents having to rely on friends and other observer accounts. At sites A and B, the presence of an AIMS allows such assessments to be undertaken over a longer time frame than at site J, at which such assessments will result in ambulance crews or police being involved for a protracted length of time or, depending on the other demands on services, a referral to ED:

Like with drunks, they don’t need to be in ED, but if we discharge on scene and their friends don’t look after them properly, and they die, then it’s our fault and not theirs for getting so drunk. So I’ll only ever discharge if they actually seem fine, you know, talking and walking, and with people who can look after them, but if they’re out of it, it’s too risky. Plus alcohol can mask stuff like head injury, so it’s better just to be safe. Paramedic (site B)

Much of the work of managing AAI also involves managing vulnerability, particularly of women. AIMSs operate as places of safety in such cases, but this option is not available at site J.

• Organising logics and ways of working

Street-level work

At all three case study sites the different agents in the NTE worked flexibly and responsively to identify and manage alcohol-related risk. Activity was underpinned by an organising logic that emphasised prioritisation of activity in relation to demand, using resources judiciously given agents’ wider responsibilities, and the avoidance of inappropriate use of emergency services. At site J, in the absence of an alternative to ED, ambulance crews acted as gatekeepers to ED:

I manage it by trying to discharge on scene if I can. Now, that will take more time, but if it saves a bed up there it’s more cost-effective and a better outcome because they [the intoxicated] are hard to manage, aren’t they? Advanced EMT (site J)

Agents at all three sites were connected by radio; this facilitated reflexive monitoring of the NTE and situational awareness of shifting patterns of demand. Radio can be used to alert agents about incidents where intervention is required and negotiate referrals based on agents’ availability and wider priorities:

The AIMS mobile medics received a call from the Street Pastors to attend to a ‘paralytic female’ who they could not get ‘off the floor’. The mobile medics agreed to attend, leaving the AIMS to respond to the call. However, en route they received what they felt was a higher priority call (an unresponsive female) from door staff so they decided to defer their attendance to the first call, informing the Street Pastors that they were attending a ‘higher priority call’ and advising them to radio police for assistance. Field notes

Maintaining situational awareness appeared to be more challenging at site J owing to the geographical spread of the NTE. Outside the primary areas of night-time activity the NTE was distributed across many streets, some of which had only one large venue. K-responders fulfilled an important role, linking on-the-ground intelligence of the demands in the NTE to ambulance control. Ambulance dispatch used the K-responder paramedic to ‘quickly eyeball’ cases in the city centre before determining what resource was required, as information from calls was often limited. Furthermore, because calls were often from the same vicinity, and for similar kinds of complaints, dispatch could also make use of the K-responder paramedic to verify how many patients were on scene, to prevent dispatching too many resources unnecessarily.

Referral pathways in the NTE can be complex. A referral might begin with a member of door staff first noticing an intoxicated individual inside or outside the premises and deciding if they should handle the issue themselves, contact the police, Street Pastors or ambulance services or do nothing. To some extent, referral pathways were informed by the availability of other agents. When an agent arrived at the scene, they had to decide on the appropriate action. The police at all sites were encouraged to use the Street Pastors (or, at site B, MPS volunteers) where this was appropriate to avoid being distracted from their core work.

In the presence of an obvious injury, determining the requirement for ED or AIMS referral or treatment on the scene was usually straightforward. In cases of acute intoxication and absence of an injury, or where individuals were ‘flat out’, reaching a disposal decision was more complicated, reflecting the need to manage risk and use resources appropriately. Decision-making was often based on situated judgements taken on the ground, in the light of the perceived state of the individual, whether they were alone or with friends, and at what stage of the night the agent encountered the individual. For example, if an individual appeared very intoxicated but was in the care of friends who were acting in the individual’s ‘best interests’, then assisting the individual and their friends into a taxi home was viewed as a satisfactory outcome. In cases where this was not possible, the AIMS provided a useful facility where they could be kept safe and monitored until sobering up. At site J, in the absence of an AIMS, agents had to remain on the scene until they were able to discharge or had to take the individual to ED. Site J Street Pastors reported that they spent more time dealing with individuals who were vulnerable, particularly lone females, than individuals who were acutely intoxicated. They also reported sometimes using the 24-hour McDonald’s (McDonald's Corporation, San Bernardino, CA, USA) on the edge of the city as a safe space where lone females could wait until they could get a train or bus home in the morning.

Although organised and structured differently, the successful operation of both the AIMSs hinged on negotiating the management of intoxicated individuals to consider the core roles of each of the agents involved while working flexibly to mitigate some of the risks to which individuals in the NTE are exposed. Although there was a strong sense that nurses are the overall authority on patient care, during busy periods roles and responsibilities become more fluid. The need to manage patient flow was an important organising logic in both AIMSs, but this appeared to be driven by the need to maintain capacity rather than meeting performance targets (such as in the EDs).

An individual attending an AIMS was first assessed by a nurse and a decision was made about whether they could be treated or should be referred to ED. Although referral pathways to the site B AIMS were open, the site A service had formal referral criteria. Nevertheless, we observed that NTE agents regularly referred individuals to the site A service who did not meet the referral criteria; ED nurses were happy to assess and make the ED referral if this was indicated.

The site A AIMS was formally aligned with the ED; thus, the management and progress of referred patients reflects the fact that they have been triaged in the AIMS. Minor injury patients were transported to ED by taxis or the urgent care service; in more serious cases (e.g. head injury), ambulance crews were involved. Operating within the same governance structures as the ED also enabled the AIMS nurses to refer patients to mental health or social services when necessary. Unlike ED, the AIMS also had direct access to PARIS (mental health services database) and indirect access to the police database (via the officer in the AIMS). Access to the PARIS database enabled ENPs to establish whether a patient presenting with potential mental health concerns was known to mental health teams or a new referral was required. Irrespective of whether or not the patient was known to mental health services, if they displayed suicidal behaviour or expressed suicidal thoughts then they were referred to the ED for observation.

There was no formal relationship between the AIMS and the ED at site B. In instances where the nurse was unable to fully assess or treat the patient, the patient was advised to attend the ED following their assessment. An informal agreement between St John Cymru and the ED enabled St John Cymru patients to be offloaded quickly to allow the crew to return to the city centre. AIMS staff also made extensive use of taxis to transport less serious cases to ED.

Emergency department

In the absence of AIMSs or when the AIMS was not operating, acutely intoxicated patients were referred to ED. Here, intoxicated patients were cared for in the context of the wider spectrum of ED work and prioritised according to need and clinical risk. All ED work in the case studies was driven by waiting-time targets, where the aim is to see, treat and discharge patients within 4 hours. During the fieldwork, the effects of this were most marked at site J where, unlike in Wales, there are financial penalties for failing to meet these targets. The structure of EDs in all cases included the areas minors, majors and resus (resuscitation area), with additional areas such as a Clinical Decision Unit (site J) or Ambulatory Care Unit where patients could be placed if they did not require a trolley and/or were likely to be discharged after a period of observation and assessment.

At site J, all patients arriving by ambulance were admitted initially into majors or resus but, depending on the demands on the service, could be reallocated to minors by the nurse who triaged patients on arrival. The management of patient flows and the effective utilisation of beds was a nursing responsibility, but pressures on admissions and downstream blockages in the hospital meant that sometimes there was no option but to attend to patients in the corridors and in the middle of ward areas. Fieldwork at site J revealed nurses to be working under considerable pressure and feeling dissatisfied by how the demands on the system compromised their ability to provide dignified care. In this context, nurses tended to perceive intoxicated patients as inappropriate users of the service.

According to the lead nurse at site J, most of the intoxicated patients in the ED were not acutely intoxicated but had sustained a minor injury under the influence of alcohol. These patients would be seen in minors and treated for their presenting complaint. Most sobered up while waiting to be treated and had a degree of sobriety when seen. Acutely intoxicated patients in majors tended to arrive by ambulance and during the fieldwork presented with a combination of intoxication and a head injury or a fall or a mixture of recreational drug and alcohol use. Patients unable to maintain their own airway, presenting a low Glasgow Coma Scale (GCS) score, who had aspirated vomit or who were violent and aggressive were admitted to resus. Patients considered too intoxicated to be discharged were moved to the Clinical Decisions Unit where they could be observed before discharge. This was also a mechanism for managing waiting-time targets.

• Intoxication management

Street level

At all case study sites, much of the work of managing alcohol intoxication and risk took place at street level. Door workers, police, Street Pastors, MPS volunteers and ambulance crews worked hard to deal with situations on the scene. This might involve assisting someone who is unwell, providing water or helping people to contact friends and/or supporting individuals to get a taxi home. At sites A and B, the AIMS provided an alternative place of safety to enable individuals to recover, whereas at site J intoxication management could occupy street-level agents for prolonged periods of time and/or result in ED admission.

Staff at site A and site B AIMS worked actively to manage intoxication. During the fieldwork there were relatively few occasions where a patient’s stay extended beyond 2 hours, and both services worked with an organising logic designed to sober up patients and/or discharge patients into the care of family and friends. Observed strategies for achieving this included:

• putting intoxicated patients on a chair rather than on a stretcher/bed to prevent them from falling asleep
• repeatedly assisting patients to sit upright
• giving intoxicated patients water
• attempting to engage intoxicated patients in conversation to keep them awake
• enlisting friends and family into the care and management of intoxicated patients
• proactively contacting friends and family at the earliest opportunity to expedite discharge.

At all case study sites the active management of intoxicated patients in AIMSs contrasted with the management of intoxicated individuals in ED. On the one hand, intoxicated ED attendees who were not deemed to be at risk tended to be left to sober up in the waiting room, with staff privately hoping that they would self-discharge, particularly when ED was busy. Unlike AIMSs, EDs did not have the resources for staff to proactively contact friends and family to enable discharge. On the other hand, ED staff observed that ‘flat out’ patients tended to be overinvestigated by doctors. Pressures of work on staff, a target-driven culture and the very real challenges of undertaking an assessment on someone who is unconscious or uncooperative meant that intoxicated attendees were often sent for computerised tomography (CT) scans to exclude a possible head injury before a full clinical assessment had been carried out. At site J, patients required a nurse to accompany them to a CT scan and one consequence of this was to deplete ED nurse staffing levels, which undermined the quality of care nurses felt able to provide.

A member of staff from the site J ED highlighted that one advantage of an AIMS would be to improve the quality of care received by intoxicated patients in the ED:

I think people just expect too much. The more you give, the more they’ll take. One patient annoyed me the other day, an intoxicated one – she was asking me if I could get her a mirror so she could look at her hair [pulls a face of disbelief]. I felt so angry with her. As if we have time to do that?! So I just told her she could go and look in the bathroom. But if I was a staff nurse in an AIMS I think I’d feel different because that’s what the service is there for, so I would feel like I could provide better quality care for these intoxicated patients, without feeling bad about it taking me away from giving quality care to my other patients. I think it would be a win-win. Non-intoxicated patients in here would get better care, because we would be able to give them our complete focus, and intoxicated patients would get better care because we wouldn’t have to be worried about caring for our more serious patients. Staff nurse

• Follow-up and interventions

There was little evidence of services deploying short-term interventions to address alcohol consumption. A brief alcohol intervention – in the form of videoing people when they were intoxicated – was built into the site A AIMS design but later abandoned because it was impractical. At the time of the fieldwork, AIMS staff shared patient details with Taith (Barry, UK) (a third-sector drug and alcohol open access and engagement service) who contacted each patient that had attended the AIMS to carry out a welfare check within 72 hours.

Interventions at the site B AIMS were less about alcohol consumption and more about encouraging individuals to take responsibility for themselves, and for each other, when on nights out. Over freshers’ week, AIMS staff handed out wristbands to service users on their discharge. The wristbands informed patients that they had visited the AIMS and highlighted the local ‘#wheresyourmates?’ campaign, run by a local university to enhance student safety in the NTE by reminding students to remain in contact with their friends on nights out.

At site J, staff informed us that they tended to offer brief interventions only to those who repeatedly attended the ED for intoxication/alcohol-related incidents and this entailed provision of a leaflet on alcohol services.

Treatment milieu

The organisational culture of the two AIMSs contrasted markedly to the clinical culture of all three EDs and this had important implications for staff interactions with the acutely intoxicated. In both facilities, service users were generally young, out enjoying the NTE and accompanied by friends in the clinical areas. Most staff in the AIMS had chosen to work in the AIMS and saw the management of intoxicated individuals as their core work, whereas in the three EDs such patients tended to be viewed as distractions from the ‘real’ work of ED staff:

If it’s a purely intoxicated patient, they don’t need to be here really, they don’t need urgent emergency care, I mean we don’t really provide any clinical care, and I just end up feeling like I’m their mother, looking after them, like a babysitting service, and I’m not here for that. Imagine when it’s busy and we have an intoxicated patient, an intoxicated patient with injuries, and then all your other urgent patients. It’s an ethical thing too. It costs £250 just for an ambulance. It’s a ridiculous waste of resources. Staff nurse

Compared with work roles in the ED, work roles in the AIMS were more fluid [‘everyone mucks in’ (staff nurse)], albeit with clear demarcation in relation to clinical decisions. In addition, other NTE agents dropped in to catch up with staff or to deliver food and drinks to staff, particularly if the city centre was quiet. Staff would share stories and discuss the politics of their respective jobs. For the various agents of the NTE, these opportunities for ‘chatter’ were viewed as a valuable resource for learning and better understanding each other’s work, and sharing their knowledge of the NTE in general.

The above qualities had the effect of making the AIMS environment feel more informal than the ED. The revelry of the NTE seemed to seep into the service, and the AIMS staff appeared to enjoy this. For example, at site A, staff collected and kept the various fancy-dress props left behind or given to them by patients, and spent time talking with patients. AIMS staff seemed to enjoy opportunities to exchange stories with their patients. Because there was less concern that an intoxicated patient’s behaviour would have a negative impact on the experiences of their fellow patients, who were also likely to be patrons of the NTE and thus out to have a good time, staff were able to engage with patients ‘on their level’, whereas in the ED intoxicated patients whose behaviour was inappropriate were challenging to manage within the prevailing interactional norms.

• Working with the acutely intoxicated

Staff orientation to acute alcohol intoxication

At all three case study sites, emergency services staff regarded AAI as normal behaviour and for the most part staff were non-judgemental in their interactions with patients:

I mean we’ve all been there. Paramedic (site B)

We’ve all been like it. Police officer (site B)

Nevertheless, although AAI was accepted as normal behaviour, it was not condoned. Although AIMS staff were happy to engage and interact with patients on friendly terms, this did not extend to what, at site A, they termed ‘there, there nursing’, that is, anything that made the patient too comfortable. Indeed, anyone exhibiting such behaviours, for example, by rubbing a person’s back or providing blankets, was reminded that this was not how things should be done.

At street level, the primary complaint was not that people became intoxicated but that responsibility for looking after them fell to the emergency services:

Problem is, people won’t take responsibility for themselves anymore and no one will take responsibility and turn inappropriate people away either. Paramedic (site B)

We used to get ‘em [drunks] all the time before the AIMS. Trouble is, it’s too easy to call an ambulance and people don’t like to take responsibility. [. . .] People don’t seem to have any common sense anymore. Friends won’t just put their mate in a taxi or look after them. It’s just too convenient to call us and have someone else look after them. Paramedic (site B)

In the ED there was ambivalence about the care of intoxicated patients. On the one hand, being deemed responsible for their own condition, they were regarded as undeserving and inappropriate users of the service. For example, nurses referred to the care given to those sleeping off the effects of intoxication as ‘babysitting’. On the other hand, it was also recognised that individuals were vulnerable and presented clinical risks. The care of intoxicated patients in majors and resus represented dilemmas for staff; intoxicated patients were regarded as an illegitimate demand on resources that should be left available for other emergencies:

Healthcare support worker: Why are they here if they’re just intoxicated? There’s nothing wrong with them?

M (staff nurse): As a place of safety, you can’t just leave them on the street, can you? They’re vulnerable.

Healthcare support worker: Right, I get it, but there should be somewhere else you can take them.

M (staff nurse): I know.

Healthcare support worker: I mean, there’s over a 4-hour wait to see a doctor.

M (staff nurse): Well, they’re not really here to see a doctor, are they, they’re here to sober up.

S (staff nurse): I’d say she’s just smashed, and he is too by the look of his eyes. They all say they’ve been spiked but the consultant tells us that that’s pretty much urban myth for the most part. You can tell the difference between someone who has been spiked and someone who is just pissed. I mean, if I’d had that many drinks I’d be on the floor. It’s funny really.

F (paramedic): Yeah, spiked on Jägerbombs more like, that’s what I said.

S (staff nurse): But yeah, they don’t really need to be here, and they’re taking up beds, so it is annoying, but what else can you do with them? There’s nowhere else for them to go. We had one here in resus last week, only 16!

Researcher: Do you think there’s a need for it [an alcohol intoxication management service]?

J (nurse in charge): Definitely. It’s a joke. Every weekend between 2 and 3 [o’clock] that’s all we get, but it’s all the time really, y’know, we’ll have someone intoxicated in most days.

• Impact on staff

Many staff had self-selected to work in the AIMS. At site B, for the St John Cymru paramedics and nurses whose core day-to-day roles were either working for WAST or the health board, working in the AIMS reportedly offered an easy way to make a ‘bit of extra’ money, providing a break from some of the pressures they experienced day-to-day:

I love it up there [in ED], but it’s so full-on all the time, so this place is a nice way to get a bit of extra, although it can be mental too. K (St John nurse/senior ED nurse)

The St John first aid volunteers and MPS volunteers, on the other hand, freely offered up their time to work in the AIMS, and reportedly enjoyed their time there. Furthermore, unlike in the ED, where interaction with intoxicated patients was viewed as a distraction from work, interaction with patients was a central component of the work in AIMSs. The volunteers appeared to enjoy engaging with their patients. Police officers, usually based in Community Safety Teams, do one AIMS shift per month. Officers reported to ‘like’ these shifts and appeared to enjoy their time chatting with other staff members and patients.

Similarly, at site A the AIMS shift seemed to provide ED staff with light relief and entertainment after what had usually been an intense, and almost always fast-paced, working week in the ED. Furthermore, unlike the seriousness and complexity of some of the conditions of patients in the ED, intoxication was for the most part viewed as straightforward to treat and the unintended outcome of some fun and frivolity rather than anything more serious. Ambulance crews saw the AIMS shift as an easy way to accrue overtime, and the paramedic and EMT seemed to enjoy the general revelry of the NTE, and the varied pace of the work (some nights it would be quiet; other nights they would be working non-stop), which contrasted with their day-to-day work, where the volume of calls was almost always high, with little time for pause. For the urgent-care assistants (UCAs), the mobile medics shift was part of core duties and this group expressed more mixed perspectives; some found intoxicated patients difficult to manage and did not enjoy dealing with bodily fluids and aggressive behaviour. Police officers’ views of their work in AIMSs also varied. For some, it was ‘a welcome reprieve’ from their normal duties in the NTE, whereas for others it was viewed as dull in comparison. Nevertheless, all officers seemed to understand that police presence in AIMSs was necessary for nurses to feel safe while conducting their work and understood that without their presence the service would no longer function. AIMS shifts were therefore accepted as a necessary part of their work in the NTE.

Street-level workers

At the street level, acutely intoxicated individuals were regarded as just one example of numerous inappropriate demands made on front-line emergency services. Agents in the NTE talked about how the growing volume of their work related to the care of cases that challenged their sense of professional jurisdiction:

Ambulance crew member 1: Our bread and butter, our top five, I’d say, is drug, alcohol, assaults, chest pain, mental health and falls.

Ambulance crew member 2: Yep, we get a lot of unnecessary calls, your mental health, your drug and alcohol, they’re just difficult patients because you don’t know what to do with them – they’ll keep coming back again and again. A lot of the young ones don’t like it.

Researcher: Why?

Ambulance crew member 1: I don’t know. They don’t want the bread and butter for some reason, but this is the job, this is the world we live in.

I don’t mind working overtime when it’s for someone genuine, but when it’s not [sighs] – I’m losing my patience I think. [. . .] I don’t think I could do this job full-time [having just returned from maternity leave]. There’s just too many social calls. Paramedic (site B)

Emergency department staff

Emergency department staff recognised that some intoxicated patients had a legitimate need for treatment and/or presented serious clinical risks (e.g. head injury). However, those who attended ED to sober up were generally viewed as inappropriate admissions that used scarce resources (e.g. nursing time, trolleys). Although intoxication was regarded as normal behaviour, those who ended up in the ED were considered to have taken it too far and had failed to take responsibility for themselves (or their family and friends had failed to take responsibility for them). Nurses were observed to work under pressure that caused them to struggle to give the quality of care they aspired to. In this context, care of intoxicated patients was an unwelcome additional demand on an overstretched team.

• Who benefits from AIMSs?

Both site A and site B AIMSs were established in the context of wider strategic initiatives designed to increase the safety of the NTE and had developed against the backdrop of growing pressure on emergency services (police, the ambulance service and ED).

• Impact on the emergency department

Long-serving ED staff at site A described the AIMS as a ‘godsend’ and claimed that it has had a huge impact on the ED, relieving some of the strain on staff and other patients:

The AIMS is an absolute godsend. We really feel it on those nights when it’s busy, like when there’s an event on or something. We just really can’t manage the intoxicated patients here [in the ED]. We had a few in off the ambulances last week, flat out they were, it was an initiation night, and they’d been drinking all afternoon. [. . .] But that doesn’t tend to happen so much now anyhow. It used to be a massive issue on weekends before the AIMS was open. We’ll get some during the week in term-time but mostly it’s the alcohol-related injuries we get in the week now. Senior nurse (site A ED)

At site B, ED practitioners tended to be positive about the AIMS, reporting that they dealt with fewer alcohol-related attendances on the nights it was operational. However, because the AIMS served only a small part of the overall area that the ED served and was not able to treat certain conditions, staff reported that they still had intoxicated patients presenting in the ED most days:

The AIMS has really helped. We’d be lost without it because we’re just so busy, but we still get intoxicated patients in here most days, even over the weekends. We’ll have those the AIMS can’t treat, like your head injuries, or anything that needs an X-ray. But we’ll also get intoxicated patients from [location], y’know, people out drinking there or those from their home addresses. Nurse in charge

Emergency department staff who worked in the AIMS as St John Cymru nurses were particularly positive about the service. They had witnessed the value of the service first-hand and could not envisage returning to a time when the service did not exist. Indeed, a few nurses recalled Saturday nights before the service, when half of the department’s trolley bays were taken up with acutely intoxicated individuals. Since the AIMS had opened, this was reportedly a rare occurrence. For nursing staff, the value of the service was that it ensured that resources were used more appropriately. It also served to reduce the volume of a category of patients who could be volatile and difficult to manage:

The AIMS is brilliant, it’s made such a difference. You can see how busy we are. Well, before, about 50% of our trolleys used to be taken up with drunks, just waiting to sober up, so it’s massively helped us here. It was horrible before. People spewing everywhere. Staff nurse

A senior health board respondent was less certain about whether or not the AIMS had reduced ED alcohol-related attendances. The data collected by the AIMS could not show whether care in the service had diverted an ED attendance. From the perspective of the health board, many AIMS attendees would not be referred to the ED anyhow. Although it was acknowledged that the service had value and was fulfilling a previously unmet need in relation to managing vulnerability, the health board (as the funders of the service) argued that the AIMS needed to better demonstrate its effectiveness at reducing unnecessary ED attendances. At the time of the study, the health board was in discussion with St John Cymru about implementing a shared information technology (IT) system whereby those who attended the AIMS are logged onto an ED IT system to allow the health board to see whether or not AIMS attendees later attended the ED.

At site J, the ambivalence of staff towards management of the intoxicated – that they were undeserving but also presented potential clinical risks – was also reflected in their views about the value of an AIMS. On the one hand, they were keen to remove intoxicated people from the ED to an alternative facility. On the other hand, many expressed concerns about how risks would be managed. Some saw the value of a MIU located in the city centre but expressed concerns about a sobering-up facility because of the perceived risks of acute intoxication and the difficulty of differentiating between individuals who needed to be supported to sober up and individuals whose symptoms were indicative of an underlying condition or injury that required medical intervention.

• Impact on ambulance services

At site A, mobile medics were highly valued because they freed other ambulance crews to respond to emergency calls in the surrounding area. Although most ambulance crews were overwhelmingly positive about the service, the service was not an additional resource but drew on existing resources, so outside the NTE the ambulance service operated with reduced resources. Nevertheless, the general view was that the overall benefits of the AIMS outweighed these costs.

At site B, all city centre calls were managed through the AIMS. WAST crews reported that the AIMS had greatly reduced the volume of alcohol-related calls that they attended, freeing them up to respond to other emergency calls in their respective localities:

Ask any crew and they’ll say that they barely go into the city centre when it’s open [. . .]. Before, the police could be with people for hours because the calls would often get downgraded if someone was with them, so it’s helped them massively too. When I’ve been on the RRV when the AIMS is not open, I’ve been with patients for hours waiting for a vehicle to convey. Paramedic (site B)

In addition, AIMSs offered a referral option in cases where the assessment of risk or the management of vulnerability would otherwise place demands on emergency crew resources. In the absence of an AIMS, site J ambulance crews had limited options. For ambulance crews, the main benefit of an AIMS was that it would offer an alternative pathway to refer intoxicated individuals (without feeling a sense of guilt about inappropriate use of ED resources) and would also take some burden off decision-making, as discharging patients who were intoxicated was viewed by some crew members as a potentially risky strategy:

I think it’s a good idea. It’s embarrassing taking people in who essentially just need babysitting. Because the problem is, we can’t leave them either. We’ve had people die because whoever we have left them with hasn’t kept an eye on them, and they’ve choked on their own vomit. And whose fault is it then? Ours, of course! Paramedic (site J)

• Impact on police

Police officers at sites A and B valued the AIMS because it provided them with a place to refer individuals who were vulnerable or who needed more intervention than they were equipped to give. In both cases, police proactively engaged with the AIMS to refer intoxicated and/or at-risk individuals. This relieved the pressure on the core work of policing:

There’s not enough resources for us to do everything properly, it’s like spinning plates. This week has been unusually quiet though, so it’s given us some time to catch up a bit, but it’s rare it’s like that. [. . .] On these shifts [after dark], we’re expected to be doing everything, but we can’t do it, we can’t go and check on every person who might be a bit vulnerable – CCTV is handy in that sense though. [. . .] But, basically, we can’t be everywhere at once and we’re expected to be, but there’s not the resource to do it. Police officer (site B)

The Street Pastors will tend to deal with D&Is [drunk and incapables], but if it’s a Saturday or a Wednesday we can send them to the AIMS. Police sergeant (site B)

Although the police were unable to place a quantitative value on the impact of the site B AIMS on police demand, both a senior source and practitioners in the field were positive about the service and its impact. Officers felt that the AIMS had greatly reduced the amount of time they spent dealing with acutely intoxicated individuals, allowing them to focus on their core work of policing. Police officers spoke of occasions prior to the AIMS where they had spent hours with intoxicated individuals waiting for an ambulance crew to arrive, and of times when they had resorted to taking individuals to the ED themselves because the wait was so long. Furthermore, the role of the MPS volunteers at the AIMS was also felt to be of value for police officers, particularly in respect of tackling vulnerability, since intervening before something escalated prevented it from becoming a police matter in the first place (e.g. preventing a potential sexual assault on a vulnerable female by providing somewhere safe for her to sober up before she made her way home).

At site A, police officers believed it was good to have somewhere to take intoxicated people, but most interviewed for the study were new and were not able to compare their work in the NTE with a time before the AIMS was in place. At site J, in the absence of an AIMS, dealing with cases of alcohol intoxication and risk could take up police resources:

The other week, I dealt with a teacher, a female, who was drunk, but I reckon she’d also taken something. She were in a right state, she couldn’t even speak, and we just didn’t have anywhere to take her. I stayed with her for 3 hours waiting for an ambulance, and that wouldn’t have even been recorded as an incident, so yeah, it does take up a lot of our time. Police officer (site J)

Indeed, the absence of an alternative referral option to ED, and the risks of resources being tied up on the ground, meant that police officers at site J were disinclined to get involved in the management of alcohol intoxication, even if this meant reduced confidence in the management of risks:

Traditionally the police are the first line of response, but we can’t be anymore. The night-time environment is particularly hard to police because there’s so much we should be doing that we can’t. If we come across someone who is shit-faced for example, ideally they should probably go somewhere safe to sober up and then make their way home, as sometimes we can spend hours with them trying to get them sober and home, or if we can’t get them up, we’re just there waiting for an ambulance, and all we can do really is assess whether they vaguely look alright, and if they’re with someone just ask them if they’re alright looking after them and going on their way basically. It’s not great gold-star service. Police sergeant (site J)

I mean, with vulnerable women, I mean with anyone who is drunk really, we have to constantly make judgements as to whether to intervene. Like last week there was quite a muscly bare-chested guy carrying a female over his shoulder, like he were taking home his conquest sort of thing, and she were completely out of it. I had to stop them and check his intentions. He said he knew her, and that he were taking her back to her flat, but how do I really know what his intentions are? How long do I question him for to find out, and do I believe him or not? Anyway, he understood but he were mortified at my suggestion that something more sinister were going on, so I gave him the benefit of the doubt and sent him on his way. She would have been a perfect diversion candidate, somewhere neutral I could have directed them to get her sobered up before taking her home. Police sergeant (site J)

• Impact on volunteers

Alcohol intoxication management services were positively evaluated by volunteers. For Street Pastors at site A, having somewhere to refer patients and quickly hand them over enabled them to help more people in the NTE. At site B, the AIMS functioned as a learning environment, developing the skills of volunteers. For example, the relationship between St John Cymru paid staff and St John Cymru first aid volunteers resembled that of a mentor and mentee. There were a couple of instances where, while overseeing the work of the first aid volunteers, the nurse or paramedic on duty would take the time to explain to the first aid volunteers how to perform certain assessments, such as assessing a patient’s GCS score or how to establish capacity (although this tended to happen more when the service was less busy). For the MPS volunteers, their work at the AIMS was reported to have provided them with a valuable learning experience, giving them unique insight into the work of city centre police officers and partnership working. Indeed, the majority of MPS volunteers volunteered specifically to gain work experience for the police force, with the relationships they built up with city centre officers over the 3 years being understood to potentially aid their future employment.

The management of alcohol intoxication and alcohol-related risk is a profoundly distributed activity. With no single responsible agency, AIMSs operate as central actors in the NTE. In sites A and B, the partner agencies had already developed a close working relationship before the implementation of the AIMS, but this had been further strengthened by the AIMS at strategic and operational levels, with agents in the NTE working together more closely than they would ordinarily, for example sharing the same space and/or the same communication network. Field observations revealed that agents worked together almost seamlessly to mitigate the risks that individuals are exposed to in the NTE, be that handing out flip flops to prevent foot injuries, alerting relevant agents to attend to individuals who were vulnerable, steering intoxicated individuals into a taxi or, depending on an individual’s state and/or injuries, referring them to AIMS or ED. Thus, the AIMSs appear to have been intrinsic to the development of a wider work ‘ecology’ in which agents in the NTE work together to manage alcohol-related risk in the context of shifting patterns of demand. In the absence of AIMSs, at site J the ED functions as the central actor, exerting power at a distance on the work of police and ambulance crews who seek to manage risk and avoid inappropriate attendances. Unlike sites A and B, site J did not have a taxi ambassadors scheme at the time of the study and drivers could not be relied on to transport intoxicated individuals home: another factor that increased the risk of an ED attendance.

The case studies suggest that from a workforce perspective the most immediate beneficiaries of AIMSs are street-level agents. When dealing with individuals who were acutely intoxicated and/or injured, all NTE agents had an interest in making a referral to AIMS. This is because alternative approaches [transporting the individual to the ED (involving ambulance crew and sometimes the police), spending time managing the case at the scene or waiting with the individual for an ambulance to arrive and transport the individual to the ED (involving police, door staff, Street Pastors)] diverted street-level agents from their primary function when demand was at its highest and could leave them responsible for a situation that they did not feel adequately trained to deal with. Thus, for street-level agents, enrolment in AIMSs resulted in the alignment of all interests and perhaps accounts for why perspectives on AIMSs were so positive. ED staff also reported positive benefits of AIMSs in reducing (but not eliminating) the requirement to care for intoxicated individuals in the ED.

Alcohol intoxication management services in both cases relied heavily on self-selecting staff: either staff working on an overtime basis or volunteers (e.g. K-responders at site J). This may be one factor contributing to the success of the services, because staff willingly engaged with the typical service user. For those who work in AIMSs as part of their core duties (UCAs and police) there is some evidence that the work was not regarded as positively. This has important implications for future service design.

We observed limited follow-up care in either the AIMSs or ED. At site B, this is something that the MPS volunteer manager wanted to change, the idea being to establish arrangements with the city’s universities, whereby repeat attenders would be offered the opportunity to engage with university support services, because, in her view, repeat attenders often had underlying mental health problems. Thus, as presently constituted, AIMSs are driven by an acute care function but have potential to fulfil a wider public health function, particularly by working more closely with universities with regards to the student population, for which poor mental health is a growing concern.

A further important finding is the value of AIMSs in supporting vulnerability in the NTE. This was one argument for having an AIMS at site J. Findings suggest that AIMSs should have a wider remit than simply diverting ED attendances and should also be evaluated on this basis.

• Cite this Page Moore SC, Allen D, Amos Y, et al. Evaluating alcohol intoxication management services: the EDARA mixed-methods study. Southampton (UK): NIHR Journals Library; 2020 Jun. (Health Services and Delivery Research, No. 8.24.) Chapter 5, Ethnographic case studies.
• PDF version of this title (5.7M)

In this Page

Other titles in this collection.

• Health Services and Delivery Research

Recent Activity

• Ethnographic case studies - Evaluating alcohol intoxication management services:... Ethnographic case studies - Evaluating alcohol intoxication management services: the EDARA mixed-methods study

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

Connect with NLM

National Library of Medicine 8600 Rockville Pike Bethesda, MD 20894

Web Policies FOIA HHS Vulnerability Disclosure

Help Accessibility Careers

Little Hans – Freudian Case Study

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Case Study Summary

• Little Hans was a 5-year-old boy with a phobia of horses. Like all clinical case studies, the primary aim was to treat the phobia.
• However, Freud’s therapeutic input in this case was minimal, and a secondary aim was to explore what factors might have led to the phobia in the first place, and what factors led to its remission.
• From around three years of age, little Hans showed an interest in ‘widdlers’, both his own penis and those of other males, including animals. His mother threatens to cut off his widdler unless he stops playing with it.
• Hans’s fear of horses worsened, and he was reluctant to go out in case he met a horse. Freud linked this fear to the horse’s large penis. The phobia improved, relating only to horses with black harnesses over their noses. Hans’s father suggested this symbolized his moustache.
• Freud’s interpretation linked Hans’s fear to the Oedipus complex , the horses (with black harnesses and big penises) unconsciously representing his fear of his father.
• Freud suggested Hans resolved this conflict as he fantasized about himself with a big penis and married his mother. This allowed Hans to overcome his castration anxiety and identify with his father.

Freud was interested in the role of infant sexuality in child development. He recognised that this approach may have appeared strange to people unfamiliar with his ideas but observed that it was inevitable for a psychoanalyst to see this as important. The case therefore focused on little Hans’s psychosexual development and it played a key role in the formulation of Freud’s ideas within the Oedipus Conflict , such as the castration complex.

‘Little Hans’ was nearly five when has was seen by Freud (on 30th March 1908) but letters from his father to Freud provide the bulk of the evidence for the case study. These refer retrospectively to when Hans was less than three years old and were supplied to Freud through the period January to May 1908 (by which time little Hans was five years old).

The first reports of Hans were when he was 3 years old when he developed an active interest in his ‘widdler’ (penis), and also those of other people. For example, on one occasion, he asked, ‘Mummy, have you got a widdler too?

Throughout this time, the main theme of his fantasies and dreams was widdlers and widdling.  When he was about three and a half years old his mother told him not to touch his widdler or else she would call the doctor to come and cut it off.

When Hans was almost 5, Hans’ father wrote to Freud explaining his concerns about Hans. He described the main problem as follows:

He is afraid a horse will bite him in the street, and this fear seems somehow connected with his having been frightened by a large penis’.

The father went on to provide Freud with extensive details of conversations with Hans. Together, Freud and the father tried to understand what the boy was experiencing and undertook to resolve his phobia of horses.

Freud wrote a summary of his treatment of Little Hans, in 1909, in a paper entitled “ Analysis of a Phobia in a Five-year-old Boy. “

Case History: Little Hans’ Phobia

Since the family lived opposite a busy coaching inn, that meant that Hans was unhappy about leaving the house because he saw many horses as soon as he went out of the door.

When he was first asked about his fear Hans said that he was frightened that the horses would fall down and make a noise with their feet.  He was most frightened of horses which were drawing heavily laden carts, and, in fact, had seen a horse collapse and die in the street one time when he was out with his nurse.

It was pulling a horse-drawn bus carrying many passengers and when the horse collapsed Hans had been frightened by the sound of its hooves clattering against the cobbles of the road.  He also suffered attacks of more generalized anxiety . Hans’ anxieties and phobia continued and he was afraid to go out of the house because of his phobia of horses.

When Hans was taken to see Freud (on 30th March 1908), he was asked about the horses he had a phobia of. Hans noted that he didn’t like horses with black bits around the mouth.

Freud believed that the horse was a symbol of his father, and the black bits were a mustache.  After the interview, the father recorded an exchange with Hans where the boy said ‘Daddy don’t trot away from me!

Over the next few weeks Hans” phobia gradually began to improve.  Hans said that he was especially afraid of white horses with black around the mouth who were wearing blinkers.  Hans” father interpreted this as a reference to his mustache and spectacles.

• In the first, Hans had several imaginary children. When asked who their mother was, Hans replied “Why, mummy, and you”re their Granddaddy”.
• In the second fantasy, which occurred the next day, Hans imagined that a plumber had come and first removed his bottom and widdler and then gave him another one of each, but larger.

Freud’s Interpretation of Hans’ Phobia

After many letters were exchanged, Freud concluded that the boy was afraid that his father would castrate him for desiring his mother. Freud interpreted that the horses in the phobia were symbolic of the father, and that Hans feared that the horse (father) would bite (castrate) him as punishment for the incestuous desires towards his mother.

Freud saw Hans” phobia as an expression of the Oedipus complex . Horses, particularly horses with black harnesses, symbolized his father. Horses were particularly suitable father symbols because of their large penises.

The fear began as an Oedipal conflict was developing regarding Hans being allowed in his parents” bed (his father objected to Hans getting into bed with them).

Hans told his father of a dream/fantasy which his father summarized as follows:

‘In the night there was a big giraffe in the room and a crumpled one: and the big one called out because I took the crumpled one away from it.  Then it stopped calling out: and I sat down on top of the crumpled one’.

Freud and the father interpreted the dream/fantasy as being a reworking of the morning exchanges in the parental bed.  Hans enjoyed getting into his parent’s bed in the morning but his father often objected (the big giraffe calling out because he had taken the crumpled giraffe – mother – away).

Both Freud and the father believed that the long neck of the giraffe was a symbol for the large adult penis.  However Hans rejected this idea.

The Oedipus Complex

Freud was attempting to demonstrate that the boy’s (Little Hans) fear of horses was related to his Oedipus complex .  Freud thought that, during the phallic stage (approximately between 3 and 6 years old), a boy develops an intense sexual love for his mothers.

Because of this, he sees his father as a rival, and wants to get rid of him.  The father, however, is far bigger and more powerful than the young boy, and so the child develops a fear that, seeing him as a rival, his father will castrate him.

Because it is impossible to live with the continual castration-threat anxiety provided by this conflict, the young boy develops a mechanism for coping with it, using a defense mechanis m known as identification with the aggressor .

He stresses all the ways that he is similar to his father, adopting his father’s attitudes, mannerisms and actions, feeling that if his father sees him as similar, he will not feel hostile towards him.

Freud saw the Oedipus complex resolved as Hans fantasized himself with a big penis like his father’s and married to his mother with his father present in the role of grandfather.

Hans did recover from his phobia after his father (at Freud’s suggestion) assured him that he had no intention of cutting off his penis.

Critical Evaluation

Case studies have both strengths and weaknesses. They allow for detailed examinations of individuals and often are conducted in clinical settings so that the results are applied to helping that particular individual as is the case here.

However, Freud also tries to use this case to support his theories about child development generally and case studies should not be used to make generalizations about larger groups of people.

The problems with case studies are they lack population validity. Because they are often based on one person it is not possible to generalize the results to the wider population.

The case study of Little Hans does appear to provide support for Freud’s (1905) theory of the Oedipus complex.  However, there are difficulties with this type of evidence.

There are several other weaknesses with the way that the data was collected in this study. Freud only met Hans once and all of his information came from Hans father. We have already seen that Hans’ father was an admirer of Freud’s theories and tried to put them into practice with his son.

This means that he would have been biased in the way he interpreted and reported Hans’ behavior to Freud. There are also examples of leading questions in the way that Hans’ father questioned Hans about his feelings. It is therefore possible that he supplied Hans with clues that led to his fantasies of marriage to his mother and his new large widdler.

Of course, even if Hans did have a fully-fledged Oedipus complex, this shows that the Oedipus complex exists but not how common it is.  Remember that Freud believed it to be universal.

At age 19, the not-so Little Hans appeared at Freud’s consulting room having read his case history.  Hans confirmed that he had suffered no troubles during adolescence and that he was fit and well.

He could not remember the discussions with his father, and described how when he read his case history it ‘came to him as something unknown’

Finally, there are problems with the conclusions that Freud reaches. He claims that Hans recovered fully from his phobia when his father sat him down and reassured him that he was not going to castrate him and one can only wonder about the effects of this conversation on a small child!

More importantly, is Freud right in his conclusions that Hans’ phobia was the result of the Oedipus complex or might there be a more straightforward explanation?

Hans had seen a horse fall down in the street and thought it was dead. This happened very soon after Hans had attended a funeral and was beginning to question his parents about death. A behaviorist explanation would be simply that Hans was frightened by the horse falling over and developed a phobia as a result of this experience.

Gross cites an article by Slap (an American psychoanalyst) who argues that Hans’ phobia may have another explanation. Shortly after the beginning of the phobia (after Hans had seen the horse fall down) Hans had to have his tonsils out.

After this, the phobia worsened and it was then that he specifically identified white horses as the ones he was afraid of. Slap suggests that the masked and gowned surgeon (all in white) may have significantly contributed to Hans’ fears.

The Freud Archives

In 2004, the Freud Archives released a number of key documents which helped to complete the context of the case of little Hans (whose real name was Herbert Graf).

The released works included the transcript of an interview conducted by Kurt Eissler in 1952 with Max Graf (little Hans’s father) as well as notes from brief interviews with Herbert Graf and his wife  in 1959.

Such documents have provided some key details that may alter the way information from the original case is interpreted. For example, Hans’s mother had been a patient of Freud herself.

Another noteworthy detail was that Freud gave little Hans a rocking horse for his third birthday and was sufficiently well acquainted with the family to carry it up the stairs himself.

It is interesting to question why, in the light of Hans’s horse phobia, details of the presence of the gift were not mentioned in the case study (since it would have been possible to do so without breaking confidentiality for either the family or Freud himself).

Information from the archived documents reveal much conflict within the Graf family. Blum (2007, p. 749) concludes that:

“Trauma, child abuse [of Hans’s little sister], parental strife, and the preoedipal mother-child relationship emerge as important issues that intensified Hans’s pathogenic oedipal conflicts and trauma. With limited, yet remarkable help from his father and Freud, Little Hans nevertheless had the ego strength and resilience to resolve his phobia, resume progressive development, and forge a successful creative career.”

Support for Freud (Brown, 1965)

Brown (1965) examines the case in detail and provides the following support for Freud’s interpretation.

1 . In one instance, Hans said to his father –“ Daddy don”t trot away from me ” as he got up from the table. 2 . Hans particularly feared horses with black around the mouth.  Han’s father had a moustache. 3. Hans feared horses with blinkers on. Freud noted that the father wore spectacles which he took to resemble blinkers to the child. 4 . The father’s skin resembled white horses rather than dark ones.  In fact, Hans said, “Daddy, you are so lovely. You are so white”. 5 . The father and child had often played at “horses” together.  During the game the father would take the role of horse, the son that of the rider.

Ross (2007) reports that the interviews with Max and Herbert Graf provide evidence of the psychological problems experienced by Little Hans’s mother and her mistreatment of her husband and her daughter (who committed suicide as an adult).

Ross suggests that “Reread in this context, the text of “A Phobia in a Five-year-old Boy” provides ample evidence of Frau Graf’s sexual seduction and emotional manipulation of her son, which exacerbated his age-expectable castration and separation anxiety, and her beating of her infant daughter.

The boy’s phobic symptoms can therefore be deconstructed not only as the expression of oedipal fantasy, but as a communication of the traumatic abuse occurring in the home.

Blum, H. P. (2007). Little Hans: A centennial review and reconsideration . Journal of the American Psychoanalytic Association, 55 (3), 749-765.

Brown, R. (1965). Social Psychology . Collier Macmillan.

Freud, S. (1905). Three essays on the theory of sexuality . Se, 7.

Freud, S. (1909). Analysis of a phobia of a five year old boy. In The Pelican Freud Library (1977), Vol 8, Case Histories 1, pages 169-306

Graf, H. (1959). Interview by Kurt Eissler. Box R1, Sigmund Freud Papers. Sigmund Freud Collection, Manuscript Division, Library of Congress, Washington, DC.

Graf, M. (1952). Interview by Kurt Eissler. Box 112, Sigmund Freud Papers. Sigmund Freud Collection, Manuscript Division, Library of Congress, Washington, DC.

Ross, J.M. (2007). Trauma and abuse in the case of Little Hans: A contemporary perspective . Journal of the American Psychoanalytic Association, 55 (3), 779-797.

Further Information

• Sigmund Freud Papers: Interviews and Recollections, -1998; Set A, -1998; Interviews and; Graf, Max, 1952.
• Sigmund Freud Papers: Interviews and Recollections, -1998; Set A, -1998; Interviews and; Graf, Herbert, 1959.
• Wakefield, J. C. (2007). Attachment and sibling rivalry in Little Hans: The fantasy of the two giraffes revisited. Journal of the American Psychoanalytic Association, 55(3), 821-848.
• Bierman J.S. (2007) The psychoanalytic process in the treatment of Little Hans. Psychoanalytic Study of the Child, 62: 92- 110
• Re-Reading “Little Hans”: Freud’s Case Study and the Question of Competing Paradigms in Psychoanalysis
• An” Invisible Man”?: Little Hans Updated

Comparison Study of Shading Device Commercial Buildings: Case Study Shopping Malls in East Kuala Lumpur

• Nur Sarah Khadijah Muhamad Khairil Fuad
• Wan Nur Rukiah Mohd Arshard1 Mohd Arshard

12 The problem with using shading devices in shopping malls lies in balancing their aesthetic design with their ability to support energy performance. This study aims to compare the effectiveness of shading devices in commercial buildings, specifically focusing on two shopping malls in Taman Melawati, Kuala Lumpur: Melawati Mall and KL East Mall. The objective is to identify the types of shading devices utilized in these shopping malls and evaluate their impact on glare and aesthetic facades. The research employs a qualitative approach, emphasizing direct observation of the shading devices used on the façades of both malls. The study reveals that Melawati Mall and KL East Mall each employ different shading device designs tailored to their unique architectural features and building orientations. Melawati Mall strategically places fixed overhangs and horizontal louvers according to the building's sun exposure to maximize shading efficiency. In contrast, KL East Mall incorporates a combination of vertical fins and perforated metal screens, designed to provide optimal shading for its glass façades while enhancing the building's aesthetic appeal. The findings indicate the importance of design and pattern in the shading device strategies used on shopping mall façades. The results show the types of shading devices, their locations on the façades, and how their placement addresses glare issues during the morning and evening. In conclusion, designers must carefully consider climate, solar radiation, glare from the sun, building orientation, and the choice of materials on the façade when selecting shading devices. These factors are crucial to ensuring both energy performance and visual appeal in the design of commercial buildings.

• EndNote - EndNote format (Macintosh & Windows)
• ProCite - RIS format (Macintosh & Windows)
• Reference Manager - RIS format (Windows only)

Full Paper Template

Interested to submit your article?

Publication Fees

Article Processing Charge (APC)

• For Readers
• For Authors
• For Librarians

Asian Scholars Network (002903215-H) Website:  https://asianscholarsnetwork.com/ Email: [email protected] Facebook: Asian Scholars Network